Who scans colour negatives?

Scanning 35mm film on a small desk

You want to view your colour negatives at home, but need to allow space for the scanner, film holder and controls. Consumentenbond says the choice depends on factors including the amount of material and how important image quality is; Plustek describes the OpticFilm 8200i SE as a scanner for 35mm film.

Working with several film formats

You want to avoid finding that a 35mm holder won’t fit older 110, 126 or 120 negatives. Compare your film formats with the supported formats and holders for the specific model, as set out by brands such as reflecta and KODAK Photo Plus.

Scanning without a computer

You want to view negatives on a screen and save scans to an SD card. Check which holders are included and whether the required card comes with the scanner; KODAK Photo Plus’s European product information states that the SD card is not included.

What should you look for?

Start with the film formats you actually have, then work out how much room the scanner and scanning process can take up.

Consideration What to look for Who is this important for?
Film format Compare your negative formats with the formats supported and the holders included with the exact version. For 126 film, reflecta lists an optional holder for the x66-Scan. I want to make sure my older or mixed film formats fit the holder. That’s why around 29% of consumers prioritise format compatibility above all else.
Desk space Measure the available width, depth and height, and allow room for the film holder, feeding strips through and, if needed, a computer. I want to use the scanner without the holder and film strips taking over my whole workspace. Around 29% of consumers put the desk space required first.
Image quality Compare the original sensor or optical specification with any interpolated output, and check which correction options and software suit the way you work. reflecta lists a 14 MP sensor and interpolated 22 MP output for the x66-Scan. I want to assess colour and detail, rather than relying solely on the biggest output figure. Around 24% of consumers say image quality is their main buying concern.
Scanning without a computer Check whether the model has a screen and SD storage, whether an SD card is included, and whether a computer-connected scanner supports software that works with your computer. I don’t want to need my computer on the desk while scanning, and I want to save scans directly. Around 18% of consumers prioritise standalone scanning above all else.

Common buying mistakes

  • Assuming a higher megapixel count means more captured detail

    The reflecta x66-Scan’s stated 22 MP output is interpolated from a 14 MP sensor. This means the sensor itself is not 22 MP.

    Compare the original sensor or optical specification and the post-processing you need, rather than focusing only on the biggest number on the packaging.

  • Measuring only the scanner’s casing

    The film holder and the room needed to feed in film can make the workspace required larger than the scanner itself.

    Before buying, measure the space for the scanner, holder, loose film strips and, if needed, your computer.

  • Choosing a 35mm scanner for a mixed collection without checking the formats

    The Plustek OpticFilm 8200i SE is designed for 35mm film. The reflecta x66-Scan supports certain 120 formats, and reflecta lists an optional holder for 126 film.

    Check a few representative negatives and what’s included in the box before choosing a model.

  • Treating a discontinued flatbed model as a standard new purchase

    Epson’s Netherlands product page lists the Perfection V600 Photo as discontinued and no longer available.

    If you’re considering a second-hand model, assess its condition, the film holders included and whether the software is still usable.

Brands to consider as a guide

Plustek

The OpticFilm 8200i SE is a computer-connected film scanner for 35mm colour negatives.

  • Plustek lists an infrared channel and an optical resolution of 7200 dpi in the product specifications.
  • The model is for 35mm film and requires compatible computer software. Before buying, check which installer is for the 8200i SE.

reflecta

The x66-Scan is a standalone scanner for 35mm and certain 120 and 127 formats.

  • According to reflecta, the scanner saves JPEG files to an SD card and comes with holders for 35mm and 120 film.
  • The stated 22 MP output is interpolated from a 14 MP sensor. For 126 film, reflecta lists an optional holder.

KODAK Photo Plus

The European SLIDE N SCAN version with a 5-inch screen is a standalone option for supported 135, 110 and 126 negatives.

  • The European product information lists film adapters and SD storage.
  • The required SD card is not included. Note that the 5-inch version is not the same model as the separate 7-inch SLIDE N SCAN Max.

Rollei

The PDF-S 240 SE is designed for a mixed photo archive of negatives, slides and printed photos.

  • Rollei lists standalone scanning, card storage and support for 24 × 36 mm negatives.
  • The stated support for 24 × 36 mm negatives does not confirm compatibility with 120 film.

Epson

The Perfection V600 Photo is a flatbed scanner with a transparency unit, film holders and space for prints.

  • Epson lists support for 35mm strips and 120/220 film; the stated dimensions are 280 × 485 × 118 mm.
  • Epson Netherlands lists the model as discontinued and no longer available.

Products at Joybuy

Related products will be available soon.

Frequently asked questions

Can I use a standard document scanner for my colour negatives?

For film, use a scanner with a transparency unit and holders that fit your negatives; the term ‘flatbed’ on its own doesn’t tell you that. Epson lists these features for the Perfection V600 Photo, but also says the model has been discontinued.

What should I check when scanning and saving scans?

Use the holder for the exact film format, and check a test scan for dust and colour before processing a whole batch. Set aside time to check and organise your files too; Consumentenbond considers this part of digitising your collection yourself.

Which extra parts or software should I check?

Check what’s in the box: the required SD card is not included with the European KODAK SLIDE N SCAN with a 5-inch screen. If you’re buying a computer-connected model, it’s worth checking before you buy that the right software is available for your computer. If something is missing, the seller must provide a solution under the rules for the statutory guarantee, according to the Dutch government.

Is there a cooling-off period if I buy a scanner online in the Netherlands?

For a distance sale, you generally have a 14-day cooling-off period, according to the Dutch government. Check who the seller is: a purchase from a private individual is not covered by the example of a distance sale mentioned here.