Who is this choice relevant to?

Club manager dealing with poor coverage

You want to open the archive at the end of the corridor or in an adjoining room, so you need to work out where Wi-Fi points could go. The Consumers’ Association (Consumentenbond) offers practical advice on Wi-Fi reception and placement.

Archive manager welcoming visitors

You want to offer members or guests Wi-Fi without giving them access to internal archive systems. The Dutch Data Protection Authority (Autoriteit Persoonsgegevens) lists network segmentation and authorisation among its security measures. The right measures depend on the data and the risks involved.

Volunteer installing the network

You need to find out whether you can keep the existing modem-router, where cabling can run, and how extra equipment will be powered and managed. ACM ConsuWijzer offers information on choosing your own modem or router.

What should you consider when choosing?

First, map out reception in the areas where the archive is used and set clear limits on guest access. Then decide between a single router, a mesh system or a wired access point.

What to consider What should you check? Which consumers is this relevant to?
Coverage where the archive is used Test the existing connection in every relevant area and check where a router or extra point could be placed and connected. If I want to open the archive at the end of the corridor too, I need to know where reception is poor. Around 36% of consumers put coverage where the archive is used first.
Access to archive data Decide who should have access, then test whether visitors’ devices can reach the internal network and archive files. If visitors use Wi-Fi near an archive that may contain personal data, I want clear boundaries around access to both. Around 29% of consumers give secure archive access their highest priority.
Connections and installation Make a note of the existing modem-router, spare Ethernet ports, possible cable routes, mounting location and power requirements. If I’m installing the equipment myself, I want to know in advance whether a cable can reach the chosen location and how the access point will be powered. Around 21% of consumers focus mainly on connections and installation.
Simultaneous use Work out how many devices will connect at once and where the archive server is located. Then check the ports and Wi-Fi features. If several volunteers open files at the same time, I want the network setup to suit that situation rather than comparing speed figures alone. Around 14% of consumers put simultaneous use first.

Common buying mistakes

  • Comparing only the highest Mbit/s figure

    A model’s advertised Wi-Fi speed doesn’t tell you how good reception will be at the end of the corridor.

    First, check the connection in the areas where the archive is used and consider where any Wi-Fi points could go. Only then compare speeds and connections.

  • Placing a wireless mesh point where the signal already drops out

    An extra point still needs a usable connection to the network. With the Deco X50, an Ethernet connection between units is an optional setup.

    Plan where the points will go, and find out whether you can run a cable if the wireless connection between them isn’t good enough.

  • Assuming an access point is a complete router

    The UniFi U6+ reviewed here is an access point with an Ethernet interface and specific power requirements. An access point doesn’t replace the router on its own.

    Decide which device will provide the router functions, and check what network connection and power the access point needs.

  • Assuming a guest network guarantees secure archive access

    A guest network, network rules and file authorisation are separate safeguards.

    Test which internal systems can be reached from a visitor’s device, and restrict access to archive files at user level.

Brands to consider for this Wi-Fi setup

TP-Link

The Archer AX55 is a standalone Wi-Fi 6 router, while the Deco X50 is a mesh router with optional Ethernet backhaul.

  • TP-Link lists Wi-Fi 6 and gigabit ports for the Archer AX55. For the Deco X50, the manufacturer describes an optional wired connection between units.
  • These models don’t require the same installation. Their advertised speeds don’t measure coverage along the club corridor.

FRITZ!

The FRITZ!Box 4060 is designed to work as a router behind an existing modem, and offers Wi-Fi 6, mesh features and phone functions.

  • FRITZ! lists a 2.5-gigabit WAN port, three gigabit LAN ports and a five-year warranty for this model.
  • Check whether telephony and the other features are useful for your club. The stated maximum Wi-Fi speed doesn’t tell you what coverage the router will provide in the corridor.

ASUS

According to its specifications, the RT-AX58U is a configurable Wi-Fi 6 router with router and access point modes.

  • The official specifications list four gigabit LAN ports, as well as router and access point modes.
  • ASUS lists different processors for hardware versions V1 and V2. Check which version you’re buying, and don’t assume that features from one version apply to the other.

Ubiquiti

The UniFi U6+ is a wired Wi-Fi 6 access point for a suitable location near the corridor or archive room. It isn’t a standalone replacement for the main router.

  • The specifications list a gigabit Ethernet port and guest isolation.
  • Check the power requirements and the full network configuration. Ubiquiti describes separate settings for network and client isolation.

Joybuy products

This selection of Joybuy products includes standalone routers and mesh options for accessing a club archive. For each model, check that the setup suits your existing modem-router, the coverage you need and how you’ll separate visitors from the internal network.

TP-Link TL-WR841N wireless router, single-band 2.4 GHz, white

TP-Link TL-WR841N, single-band 2.4 GHz

A standalone router to consider if one well-placed router can reach the areas where you need to use the archive.

The description lists Wi-Fi 4 on 2.4 GHz and four 10/100 Mbit/s Fast Ethernet LAN ports. These specifications don’t measure coverage at your venue.

View at Joybuy
TP-Link TL-WR802N V4 router

TP-Link TL-WR802N V4

This router may suit a setup with a single device, provided the chosen location offers enough coverage.

The description lists Wi-Fi 4 on 2.4 GHz and one network port with speeds of up to 100 Mbps. Check that these connections suit the devices used at your club.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7

ASUS ZenWiFi BD4 Wi-Fi 7

A mesh option to consider if you need Wi-Fi points in several places. Actual coverage depends on where they’re placed and the connection at your club.

The product name lists Wi-Fi 7 (802.11be) and dual-band 2.4 GHz and 5 GHz. The description mentions expanding the system with compatible ASUS mesh systems.

View at Joybuy
TP-Link Deco M4 three-unit set, dual-band Wi-Fi 5

TP-Link Deco M4, 3-pack, Wi-Fi 5

A mesh set to consider if you need Wi-Fi in several places. Check that each unit can get a usable connection in its intended location.

The product name lists three units, dual-band 2.4 GHz and 5 GHz, and Wi-Fi 5 (802.11ac). The description mentions roaming between units and a guest network feature.

View at Joybuy
ASUS RT-AX52 AX1800 dual-band Wi-Fi 6 router

ASUS RT-AX52 AX1800 Wi-Fi 6 router

A standalone router to consider if one device in the chosen location provides enough coverage. The description also mentions AiMesh expansion.

The product name lists dual-band 2.4 GHz and 5 GHz. The description mentions Wi-Fi 6, AiMesh, MU-MIMO and OFDMA.

View at Joybuy

Frequently asked questions

Does the club need to buy a new router before adding extra coverage?

No. First, check the placement, settings and reception in the areas where the archive is used. If reception is poor in just one area, a well-placed extra Wi-Fi point or access point may be more useful than replacing the router.

Can a wired access point be mounted anywhere in a narrow corridor?

Not without checking the installation and location. The UniFi U6+ needs an Ethernet connection and a suitable power supply. After installation, also test reception where the archive is used.

Is a guest network enough to keep visitors out of the archive?

Not automatically. Check that visitors really can’t access the internal network or other equipment, and restrict access to archive files too. The Dutch Data Protection Authority (Autoriteit Persoonsgegevens) lists network segmentation and authorisation as possible security measures. If your club processes personal data, your safeguards must be appropriate to the risks.

What extra costs and maintenance might come up after purchase?

Allow for possible extra Wi-Fi points, cabling and a suitable power supply. You’ll also need to manage settings and updates. Check what comes with each product and what support or warranty is available. FRITZ! lists a five-year warranty for the FRITZ!Box 4060; this doesn’t automatically apply to other models.

Can a club in the Netherlands use its own router, and do you need a licence for Wi-Fi?

ACM ConsuWijzer states that a provider cannot require you to use a particular brand or model of modem or router. You should still check the connection and security requirements. According to the Dutch Radiocommunications Agency (Rijksinspectie Digitale Infrastructuur), Wi-Fi use indoors doesn’t require a licence as long as you follow the rules for the designated frequencies and their use.