Who is this Wi-Fi guide for?

Archive managers

You want to access shared club files from a communal work area, while ensuring the right people have access. Where the files are stored and how the network is accessed matter more than the Wi-Fi speed figure alone. The Dutch Data Protection Authority stresses that access to personal data must be restricted.

Volunteers in an area with weak Wi-Fi

You need better coverage in one work area and want to know whether a standalone repeater will do the job or whether a cable is an option. A Wi-Fi extender needs to be placed somewhere it can still receive a usable signal from the existing network.

Clubs with visitors and multiple users

You need to distinguish guests’ internet access from access to the archive, and take account of people working in several areas. TP-Link says that devices on a Deco guest network cannot open files on the main network.

What should you look for in Wi-Fi for a club archive?

Standalone wireless repeater

Choose this option: for one work area without an ethernet cable, provided the repeater can still receive Wi-Fi from the router where you plan to place it.

Bear in mind: the connection back to the router is still wireless. Also check that users can access the local archive.

Mesh with multiple Wi-Fi points

Choose this option: if people work in several areas or one extra point does not solve the coverage problem.

Bear in mind: multiple points require more equipment. In access point mode, the main router manages network addresses for Deco, and some router features are unavailable.

Wired access point

Choose this option: if there is an ethernet cable at the communal work area and the club can manage the access settings itself.

Bear in mind: installation requires cabling and, for the Ubiquiti U6+, suitable PoE power and configuration.

What to consider What to look for when buying Who is this important for?
Access to the local archive Where the archive is stored and whether the intended Wi-Fi network can access local files. If I need to open club files from the communal work area, I want to know whether my network allows access. Around 32% of consumers put archive access first.
Coverage in the work area Test the existing signal where you plan to use the device and check whether an ethernet cable is available. In one fixed area with weak Wi-Fi, I want to know whether a repeater can still receive a usable signal there. Around 25% of consumers make coverage their top priority.
Separating guests from archive users Check the guest network settings, local access and who manages network and file permissions. If visitors need internet access but should not be able to access club files, I want to be able to manage their access separately. Around 25% of consumers prioritise guest separation.
Use in multiple areas Map out which work areas need coverage and whether a wired connection between points is possible. For a club where people work in more than one area, I want to know whether one extra point will be enough or whether several are needed. Around 18% of consumers make coverage in multiple areas their top priority.

How to avoid common buying mistakes

  • Choosing a guest network for staff who need local archive files

    The security that keeps visitors off the main network can also block the people who need to use the archive. TP-Link states that this applies to devices on the Deco guest network.

    Test file permissions from the network staff will actually use, and set up guest and archive access separately.

  • Assuming the Wi-Fi speeds on the box are guaranteed at your work area

    A product specification describes the device, but it does not tell you what connection you will get in your work area. Placement and the signal to the router also make a difference.

    Check the connection where volunteers will actually use the archive.

  • Treating a wired access point like a plug-in repeater

    An access point such as the Ubiquiti U6+ uses a network uplink and PoE power, so it is installed differently from a wireless repeater.

    Before you buy, check that you have a cable and suitable power supply, and decide who will configure and manage the device.

    A wired setup may also require a cable, PoE power supply and configuration, so check what the club already has.

Brands and product ranges to consider

TP-Link

The RE705X is a standalone repeater with access point mode. The Deco X20 range is worth considering if the club is looking at multiple points.

  • TP-Link lists a gigabit port and access point mode for the RE705X. According to TP-Link, Deco can use ethernet backhaul in access point mode.
  • Some router features are unavailable when Deco is in access point mode. These stated features do not measure coverage in the club’s work area.

FRITZ!

The FRITZ!Repeater 1200 AX is worth comparing if you already have a FRITZ! network.

  • FRITZ! lists mesh support and one gigabit LAN port for this model.
  • Check how the version you choose works with your existing router. Manufacturer specifications do not measure reception in the club room.

ASUS

According to its product specifications, the RP-AX58 offers repeater, access point and media bridge modes. It is worth considering if cabling is still an option.

  • ASUS Netherlands lists one gigabit port, AiMesh and WPA3-Personal.
  • AiMesh does not automatically mean that every router will form a single mesh network with this model. The stated Wi-Fi data rates are not measured archive speeds.

Ubiquiti

The UniFi U6+ is a wired, managed access point for a club that can configure its own network access.

  • Ubiquiti specifies PoE, a gigabit uplink, guest isolation and VLAN functionality.
  • The setup requires cabling, a suitable power supply and configuration. Stated coverage and client capacity are not measurements taken on site.

Joybuy products for multiple work areas and wired Wi-Fi

This Joybuy selection includes mesh systems for coverage in multiple areas and wired access points. If you plan to use the network for an archive, always check the network and access settings for the setup you choose.

ASUS ZenWiFi BD4 dual-band mesh Wi-Fi system

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

Suitable for a club looking to use a mesh system across several areas.

Wi-Fi 7; dual-band (2.4 GHz / 5 GHz). Check how guest access and access to local archive files are set up.

View at Joybuy
TP-Link Deco X50 mesh system with three units

TP-Link Deco X50 (3-Pack) Wi-Fi 6

Suitable for a club looking to set up coverage in different areas using multiple Deco points.

Wi-Fi 6; dual-band (2.4 GHz / 5 GHz); three-unit set. According to TP-Link, devices on the Deco guest network cannot open shared files on the main network.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653

Suitable for a club that can set up a wired access point and manage its own network.

Wi-Fi 6; PoE, VLAN mapping and web management are listed. Check the cabling, power supply and configuration requirements in advance.

View at Joybuy
TP-Link Deco XE75 tri-band mesh system

TP-Link Deco XE75 Tri-Band Wi-Fi 6E

Suitable for a club considering a mesh setup to cover multiple areas.

Tri-band (2.4 GHz / 5 GHz / 6 GHz); the product description lists three mesh units. According to TP-Link, devices on the Deco guest network cannot open shared files on the main network.

View at Joybuy
TP-Link Deco X50-PoE mesh system with three units

TP-Link Deco X50-PoE (3-Pack) Wi-Fi 6

Suitable for a club looking to use multiple mesh points and considering PoE as a connection option.

Wi-Fi 6; dual-band (2.4 GHz / 5 GHz); three-unit set; PoE and two ethernet ports are listed. According to TP-Link, devices on the Deco guest network cannot open shared files on the main network.

View at Joybuy

Frequently asked questions

Why can’t you open the local club archive after setting up a guest network?

According to TP-Link, devices on the Deco guest network cannot access shared files on the main network. Ask an administrator to decide which users should be able to access the archive, and test access from the network staff will use.

What should you check before adding another Wi-Fi point?

If you are using a repeater, check that it can receive the existing network where you plan to put it. If there is a cable, also consider an access point. In Deco access point mode, the main router must assign network addresses. After installation, test both internet access and the intended access to the archive from the work area.

Do you need a radio licence or registration for Wi-Fi in a Dutch club building?

According to the Dutch Authority for Digital Infrastructure, licence-exempt use of Wi-Fi frequencies in the Netherlands does not require notification or registration. However, use equipment that meets the applicable European requirements. This rule does not exempt equipment operating on unauthorised frequencies.

What privacy measures are relevant if the archive contains personal data?

If the club processes personal data, the Dutch Data Protection Authority says it must protect it appropriately and restrict access to unauthorised people. The appropriate technical measures depend on the processing and the risks; a Wi-Fi extender does not, on its own, manage file permissions.