What should you look for in Wi-Fi for an archive at the end of a corridor?
Start by checking the cable route and reception at the archive. Then decide whether a wired access point, mesh or a repeater is right for your setup.
| Buying concern |
What to look for |
Who is this most important to? |
| Connection at the archive |
Check reception at the archive and see whether you can install a network cable and access point there. |
If I need to access the archive at the far end of the corridor, I want to know the connection works there. Around 33% of consumers say reliable access at the archive is their top priority. |
| Extending Wi-Fi without a cable |
Find a midway spot with power and a usable signal; also check that the extender will work with your existing router. FRITZ! recommends placing a wireless repeater within the router’s Wi-Fi range. |
If running a cable isn’t possible, I want to know where there’s still enough Wi-Fi along the way for a wireless access point. Around 27% of consumers say extending coverage without a network cable is their top priority. |
| Access to archive data |
Decide who is allowed to access the archive and assess whether your setup adequately separates visitor traffic from archive access. |
If members or guests also use the Wi-Fi, I want to make sure network access doesn’t automatically give them access to files. Around 20% of consumers say restricting access to the archive is their top priority. |
| Installation and existing router |
Compare the number of access points, cables and power supplies you’ll need; for PoE, check the required standard and whether you can keep your current router. |
If my current router is still working well, I want to keep the extension and installation straightforward. Around 20% of consumers say keeping their existing equipment and managing installation costs are their top priorities. |
Wi-Fi products at Joybuy to extend coverage to the archive
These models are designed for a wired access point at the archive, a wireless repeater or a mesh extension. For the specific device, also check its CE marking and version: the Dutch Authority for Digital Infrastructure states that radio equipment sold in the Netherlands must meet the applicable European requirements and carry the correct CE marking.
No image available
TP-Link Omada EAP653
A good fit for a wired installation closer to the archive if you need a PoE access point.
The product information lists PoE, VLAN mapping, ACL, web management and ceiling or wall mounting.
View at Joybuy
No image available
TP-Link Omada EAP673-Extender
A good fit for wireless extension without a cable, provided you place the repeater where it can still receive the existing network signal.
The product information lists dual-band Wi-Fi, web management and QoS.
View at Joybuy
No image available
TP-Link EAP725-Wall
A good fit for a wired wall installation if you’re looking for a PoE access point with network management features.
The product information lists PoE, VLAN support, ACL and MAC address filtering.
View at Joybuy
No image available
TP-Link Deco X50-PoE (3-pack)
A good fit for a mesh setup with multiple access points if you want Wi-Fi in different parts of the corridor.
This is a dual-band Wi-Fi 6 system (802.11ax) with three access points and two Ethernet ports per point. According to TP-Link, PoE power requires 802.3at or 802.3bt; 802.3af isn’t supported.
View at Joybuy
No image available
TP-Link Omada EAP613
A good fit for a wired extension if you want to manage multiple access points and mount this one on a wall or ceiling.
The product information lists mesh, seamless roaming and WPA3. According to the product description, it can be powered via PoE, passive PoE or DC.
View at Joybuy
Frequently asked questions about Wi-Fi for a club archive
Does a club in the Netherlands need a licence for standard Wi-Fi?
According to the Dutch Authority for Digital Infrastructure, you don’t need a licence for standard Wi-Fi in the Netherlands. That doesn’t rule out interference, so use the correct country settings and equipment that meets the applicable requirements.
Where should you place a wireless repeater?
Place a wireless repeater where it can still connect to the existing router over Wi-Fi, not in a dead zone by the archive. The manufacturer also describes a LAN connection for the FRITZ!Repeater 1200 AX, if one is available.
Can mesh work alongside the existing router?
Yes. For the Deco system reviewed, TP-Link describes an access point mode in which the existing router continues to manage network functions. Check the mode and cabling for the exact system; TP-Link warns that certain connections in router mode can create a network loop.
Does access to the club’s Wi-Fi also give you access to the archive?
No. Wi-Fi access doesn’t determine who is allowed to open archive files. If the archive contains personal data, the club must assess the risks for itself and decide on appropriate security measures, according to the Dutch Data Protection Authority. The file permissions and network separation you need will depend on your setup.
What power supply does the Deco X50-PoE need?
For PoE power, TP-Link specifies IEEE 802.3at or 802.3bt for the Deco X50-PoE; a power source that supports only 802.3af isn’t suitable. Also check how many access points you want to install and which cables and power sources you’ll need.