Which setup is right for you?

Maker looking to reduce hand shadows

When you film from above, your hands can hide details in the clay. Ulanzi’s setup guides recommend starting with two diffused light sources on opposite sides to reduce hand shadows.

Portfolio creator who values consistent colour

If you’re recording a series of steps, you’ll want to film colours and surfaces under similar conditions. A repeatable lighting and camera setup helps you judge whether the clay looks consistent across different clips.

Maker with limited or changing workspace

Your light needs to fit without getting in the way of your camera, hands or tools. A desk clamp, separate light modifier or built-in battery each calls for a different setup, so check how you’ll mount and power the light where you plan to use it.

What should you look for when choosing?

First, check how well the light covers your work surface with a test shot. Then choose between a compact fixed setup, a main light you can shape, or a portable additional light.

Compact desk panel

Choose this if: you film at one table and can position a light with a desk clamp.

Bear in mind: a single light position may still leave hand shadows. Elgato says the Key Light Air MK.2 needs a PD power supply of at least 30 W for full brightness; this is not included.

COB light with softbox

Choose this if: you want to adjust the direction and softness of your main light, and have room for the light and modifier.

Bear in mind: a bare COB light does not produce soft light by itself. According to the listed box contents, the amaran 100x S comes with a reflector and mains power supply, but no softbox.

Small rechargeable light

Choose this if: you film in different places or want to add a targeted light to an existing setup.

Bear in mind: a compact size does not prove that one light will illuminate a whole clay-working table evenly. Check the exact version and mounting method too.

When filming a clay-modelling lesson, shoppers may want to focus on these key considerations:

What to consider What should you check? Who is this important for?
Hand shadows Film with your usual hand movements and assess the whole work surface, not just a stationary piece of clay. If I film from above, I want to keep my hands and the details I’m creating visible. Around 36% of shoppers give visibility of their actions the highest priority.
Colour and consistency Compare a test clip with the clay using your chosen camera settings; remember to consider the ambient light too. For my portfolio, I want the clay colours and changes between shots to remain consistent. Colour consistency comes first for around 29% of shoppers.
Space and mounting Measure the available table edge and check that the light, camera and your hands won’t get in each other’s way. When my camera and tools are already taking up space, I want to mount the light without blocking my work surface. Around 21% of shoppers prioritise space and mounting.
Portability and power Check which adapter or power bank you need, and how long the light will run at your preferred brightness. If I film in different places, I want to know whether the power supply will last for my recording session. Portability is the top priority for around 14% of shoppers.

Common buying mistakes

  • Assuming a high lux rating guarantees soft light across the whole table

    The maximum lux rating for the amaran 100x S is measured with a reflector at 1 metre and 5600 K. A softbox changes the setup and is not included in the listed box contents.

    Only compare figures measured under the same conditions, and check which light modifier and mount you’ll need.

    A suitable diffuser and secure mount may need to be bought separately.

  • Expecting a small light to be the main light for a whole work table

    Even in a well-lit scene, your hand can cover the detail you want to film. A small size or a battery says nothing on its own about how well the light will cover your work surface.

    Take a test shot using your actual camera framing and usual hand movements. If needed, use a mini light as fill light rather than as your only light source.

  • Treating similarly named lights as the same model

    The Ulanzi VL120 RGB and the VIJIM VL120 Bi-Color are different versions. Specifications for an earlier Elgato Key Light Air do not automatically apply to the MK.2 either.

    Check the full model name, version and what’s included in the offer before comparing specifications.

Brands to compare

amaran

The 100x S is a COB light for makers who want to build a main-light setup with a separately chosen Bowens light modifier.

  • According to amaran, the 100x S has adjustable white light from 2700–6500 K and CRI 95+.
  • The stated maximum lux rating is measured with a reflector at 1 metre and 5600 K, not with a softbox on a clay-working table. The listed box contents do not include a softbox.

Elgato

The Key Light Air MK.2 is a compact panel with a desk clamp for a fixed table setup.

  • For the MK.2, Elgato lists a colour temperature range of 2900–7000 K, CRI above 94 and a clamp for desks up to 6 cm thick.
  • Elgato specifies a PD power supply of at least 30 W for the full stated brightness; the adapter is not included.

Godox

The SL60IIBi is a mains-powered COB option with a Bowens mount for anyone who wants to combine their own light modifiers.

  • Godox lists a range of 2800–6500 K, a maximum of 75 W, CRI of at least 96 and a power supply of 100–240 V at 50/60 Hz for the SL60IIBi.
  • The stated 25,100 lux is measured at 1 metre with a standard reflector; it is not a measurement taken with a softbox on a clay-working table.

SmallRig

The RC 60B, version 4376B, is a COB light with a built-in battery for a portable setup.

  • For this version, SmallRig lists CRI 97+ and a colour temperature range of 2700–6500 K.
  • The stated battery life is up to 45 minutes at full power. The SmallRig PD charger mentioned must be bought separately.

Ulanzi

The VL120 RGB is a small battery-powered light for flexible fill lighting; the VIJIM VL120 Bi-Color is a different version.

  • Ulanzi lists a 3100 mAh battery and RGB features for the VL120 RGB.
  • These details do not show that a single unit will evenly light an entire work surface. Don’t apply specifications for the VIJIM VL120 Bi-Color to the RGB version.

Video lights at Joybuy

This selection includes COB video lights for an adjustable main light, as well as small lights for a portable or additional setup. See which shape, power source and mounting option suit your workspace.

COLBOR 200 W COB video light with Bowens mount

COLBOR 200 W COB video light

Suited to a fixed table setup where you want to adjust the light using a compatible Bowens accessory.

Listed features include 200 W, a built-in power adapter, 2700–7000 K and CRI/TLCI 96+. Check whether the softbox you want is included in the set on offer.

View at Joybuy
Ulanzi VL49 RGB video light with PK-08 mini tripod

Ulanzi VL49 RGB video light with PK-08 mini tripod

This bundle may suit a portable filming setup with a compatible DJI Osmo Pocket.

The set includes a VL49 RGB light and a PK-08 mini tripod. According to the product information, the tripod is designed for compatible DJI Osmo Pocket setups; check that it suits your equipment.

View at Joybuy
COLBOR 60 W portable COB video light with battery

COLBOR 60 W portable COB video light

Suited to filming somewhere you don’t want to rely on mains power throughout.

According to the product information, the light has a built-in 59 Wh battery and can run at 60 W for 60 minutes. Battery use requires a 60 W PD charger with 20 V/3 A. The range is 2700–6500 K, with a stated colour rendering of CRI 96+.

View at Joybuy
Ulanzi VL81 rechargeable LED video light, black

Ulanzi VL81 rechargeable LED video light, black

A rechargeable light can be handy if you want to move your lighting between filming locations.

Before choosing, check that the light output and mounting method suit the area you want to film.

View at Joybuy
Ulanzi VL49 RGB video light with 2000 mAh battery

Ulanzi VL49 RGB video light, 2000 mAh

Suited to use as a small, portable light when you want to add a targeted light to an existing filming setup.

The product information lists RGB, dimmable settings, 2500–9500 K, a 2000 mAh battery and a magnet on the back.

View at Joybuy

Frequently asked questions

Do you always need two lights for a clay-modelling lesson?

No. Start with one directed light, diffused if needed, and assess a test shot while modelling as you normally would. Add a second light if hand shadows continue to hide important details; Ulanzi suggests two diffused light sources on opposite sides as a possible starting setup for overhead shots.

How can you check for flicker before recording a whole lesson?

Make a short test recording using the camera, frame rate, shutter speed and dimmer setting you plan to use, then check the footage for visible bands. According to Ulanzi’s guidance, a single stated frequency value does not guarantee flicker-free footage at every setting.

Are an extra adapter or softbox included?

Not necessarily. Elgato says the Key Light Air MK.2 needs a separate PD power supply of at least 30 W for full brightness. The listed box contents for the amaran 100x S include a reflector and mains power supply, but no softbox.

What does CE marking mean when buying a video light?

According to the European Commission, CE marking is required when applicable harmonised EU product rules stipulate it. It is the manufacturer’s declaration of compliance, not an approval mark issued by the EU or proof of a light’s performance when filming clay. The applicable rules depend on the specific device.

What are your rights if a light bought online disappoints or breaks too soon?

ACM ConsuWijzer states that online consumer purchases generally come with a 14-day cooling-off period after delivery, subject to legal exceptions. If a product does not perform as you could reasonably expect under normal use, the statutory guarantee also applies and the seller must resolve the issue appropriately. Check the terms that apply to your purchase.