In a reverberant classroom or one that’s difficult to keep quiet, a dynamic microphone held close to the capsule is often a sensible starting point. In a quiet room, you could consider a condenser microphone if capturing vocal detail is important. USB is convenient if you want to record directly to a compatible computer, while XLR requires a suitable microphone input or interface. None of these choices will eliminate reverberation or background noise on its own, so positioning and a test recording still matter.
Who is this relevant for?
Singer in a reverberant classroom
You can’t treat the room and want to record your voice up close. In that case, a suitable polar pattern and a practical singing distance are important considerations, but they don’t guarantee that room noise will disappear. Bax Music explains that condenser microphones can also pick up ambient noise and reverberation; Shure and Samson provide model-specific information about singing distance and polar patterns.
Teacher with a school laptop
You want to record a solo vocal and check that the microphone, cable and headphones will connect to the computer you’re using. Samson and RØDE describe the USB connections and supplied cables for specific models; also check the connection on the model you choose.
Making a polished vocal recording
You can plan to record at a quiet time and want to weigh vocal detail against audible room noise and the equipment your recording setup requires. Bax Music discusses sensitivity to ambient noise; RØDE and Audio-Technica provide model information about condenser microphones and monitoring.
What should you look for when choosing?
Start with the room and your recording equipment: singing close to the microphone can be important with a dynamic model, while USB or XLR determines how you connect it.
| Consideration |
What to look for |
Who is this important for? |
| Reverberation and background noise |
Compare polar patterns and working distances; make a test recording in the intended position. |
If you can’t keep the classroom quiet or control its acoustics, you’ll want to record close to the singer. Around 36% of consumers prioritise limiting the effect of room noise. |
| Connection |
Check your computer port, the cable supplied and whether a suitable XLR input or interface is available. |
If you want to get started quickly with your existing equipment, a compatible connection is a key consideration. Around 29% of consumers prefer to connect with as little additional equipment as possible. |
| Vocal detail and room acoustics |
Compare a test recording made in the room; for XLR condenser models, check that your recording setup provides the required power. |
If you can plan a quiet recording session and vocal detail is your priority, a condenser microphone may be worth considering. Around 21% of consumers prioritise vocal detail above all else. |
| Headphone mix |
Check for direct monitoring and, if you’re using backing music, whether the model can mix your voice with computer audio. |
If you want to hear both your voice and a backing track while singing, check that each function is available. Around 14% of consumers prioritise the headphone mix. |
Common mistakes
-
Choosing a condenser microphone expecting it to solve classroom reverberation
A sensitive condenser microphone can also pick up ambient noise and reverberation. Bax Music highlights this in its studio microphone buying guide.
First, make a test recording in the classroom and listen back from the intended singing position. Don’t choose a microphone based solely on the vocal detail you want.
You may need to spend extra time finding a quieter time to record or a better position.
-
Assuming an XLR microphone can connect directly via USB
Connections and power requirements vary by model. For example, the RØDE NT1 Signature Series requires 48 V phantom power, while the AKG P120 has an XLR output.
Before buying, check the complete route from the microphone to your recording device and see which of the required components you already have.
An XLR setup may require a suitable interface or recorder; the recording chain for the RØDE NT1 Signature Series must also provide 48 V phantom power.
-
Assuming a headphone output automatically gives you a good mix with backing music
Listening directly to the microphone signal and mixing that signal with computer audio are two different functions.
Check the monitoring features and, if you sing with a backing track, the mix control on the exact model. Audio-Technica lists a mix control for the AT2020USB-X.
-
Assuming a recognisable pupil’s recording can automatically be shared
A recording in which someone can be identified may contain personal data. Music or backing tracks may also be protected by copyright.
Agree the purpose, who is involved and how the recording will be used with the school. The Dutch Data Protection Authority says schools must inform pupils and parents about the processing of personal data; you should also arrange the rights to any protected music before sharing a recording.
Brands and models to consider
Shure
The SM58 series offers a dynamic XLR option for singers who perform close to the microphone and already have a suitable recording input.
- According to the Shure manual, the SM58 has a cardioid pattern and an integrated pop filter; the manual also offers advice on microphone placement for vocals.
- The SM58 isn’t a USB microphone. According to Shure, only the SM58S and SM58SE versions have an on/off switch.
Samson
The Q2U combines USB and XLR, making it an option if you want to start with a straightforward connection and may want to adapt your recording setup later.
- Samson lists a cardioid pattern, direct headphone monitoring, cables and a desktop stand as features supplied with the Q2U.
- Samson describes this model as less sensitive to background noise in untreated rooms; this doesn’t guarantee the results you’ll get in a particular classroom.
RØDE
The NT-USB Mini is a compact USB condenser option; the separate NT1 Signature Series is an XLR studio microphone.
- RØDE lists a cardioid pattern and headphone monitoring for the NT-USB Mini. The NT1 Signature Series comes with a shock mount, pop filter and XLR cable.
- According to RØDE, the NT1 Signature Series requires 48 V phantom power. These features apply to the models mentioned, not automatically to every microphone from the brand.
Audio-Technica
The AT2020USB-X is a USB condenser microphone for computer recording, with control over the headphone mix.
- Audio-Technica lists direct monitoring, a mix control and a USB cable with adapter as features supplied with this model.
- These features apply to the AT2020USB-X, not automatically to the XLR AT2020 or older USB versions.
Sennheiser
The e 945 is a dynamic supercardioid XLR vocal microphone for use with a recording setup that has a suitable input.
- Sennheiser specifies a supercardioid pattern and a 3-pin XLR connection for the e 945.
- Sennheiser describes this model primarily for stage use. Check whether the singing position and room noise are suitable for recording in your own classroom.
AKG
The P120 is a cardioid XLR condenser microphone for use with a suitable recording setup.
- The 2017 AKG specification sheet lists a cardioid pattern, a balanced XLR output, a switchable low-cut filter and a pad switch.
- The P120 isn’t a direct USB solution; the specification sheet doesn’t include listening tests in classrooms.
Joybuy products
The selection below includes USB and wireless options for recording vocals. Check that each model’s connection and receiver are compatible with your recording device.
No image available
RØDE Wireless Micro, USB-C, black
A wireless option if you’re looking for a set with microphones and a receiver for recording vocals.
The product name lists two microphones, a camera and smartphone receiver, and a charging case.
View at Joybuy
No image available
SYNCO P2XT USB-C
A wireless USB-C microphone to consider if your recording device supports the connection you’ve chosen.
View at Joybuy
No image available
USB condenser microphone with cardioid pattern
A USB condenser microphone to compare if you’re looking for a model with headphone monitoring.
The product name lists a cardioid pattern and monitoring; check the connections and features of the version you choose.
View at Joybuy
No image available
Razer Seiren V3 Mini Quartz USB microphone
A USB microphone to consider if you’re looking for a compact desktop setup.
The product name lists tap-to-mute controls.
View at Joybuy
No image available
Verbex K9-Black wireless mini microphone
A wireless option to compare if you need a Type-C connection for recording vocals.
The product name lists two microphones and a Type-C interface.
View at Joybuy
Frequently asked questions
How should I position a microphone in a reverberant classroom?
Point the front towards the singer and position the microphone so that unwanted sound falls as far as possible outside its most sensitive direction. For vocals with the SM58, Shure recommends a distance of less than 15 cm, among other things; this doesn’t guarantee that reverberation will disappear. Make a test recording where you plan to sing.
Do I need an audio interface for a USB microphone?
Not for the direct USB connection on the USB models mentioned, as long as your recording device is compatible. RØDE lists a USB-C connection and a USB-C to USB-A cable supplied with the NT-USB Mini. A model with XLR only requires a suitable recording input or interface.
How can I avoid a delay when listening back to my voice?
Use direct headphone monitoring if your chosen model has this feature, rather than relying solely on the signal sent back through your computer. Check separately whether you can mix backing music with your voice; Audio-Technica lists a mix control for the AT2020USB-X.
What do I need for an XLR setup?
You need a suitable XLR microphone input or interface and, depending on the model, any power it requires. According to RØDE, the NT1 Signature Series requires 48 V phantom power. Also check which cables and accessories come with the version you’ve chosen and which ones you already have.
Can a school record a pupil who can be identified and share the recording?
According to the Dutch Data Protection Authority, an audio recording in which someone can be identified may be personal data. If a school processes such a recording, it must comply with the GDPR and inform pupils and parents; the legal basis and arrangements required depend on the purpose and how the recording is used. Copyright-protected music may also be subject to creators’ rights; arrange these before sharing a recording that includes backing music.