Who is this buying guide for?

Photographer of small components

You want to show small labels, solder joints or connectors clearly. Start by considering the magnification you need and which lens will fit your camera body.

Creator of consistent product photos

You photograph several circuit boards for the same online shop and want to keep colour, sharpness and framing as consistent as possible.

First-time buyer looking for a complete camera kit

You also want to photograph complete circuit boards and find out whether the supplied zoom lens is up to the job, or whether you need a macro lens for close-up details.

What should you look for when buying?

Start with the smallest detail that needs to be legible. Then choose between a standard zoom, a macro lens and focus stacking, based on the magnification, working space and sharpness you need.

Standard zoom for overview shots

When is this a good fit? When the whole circuit board and larger connectors are the focus, and a test shot shows enough detail.

Trade-off: For the RF-S 18-45mm in the specified MF mode, Canon gives a maximum magnification of 0.25×; this is not 1:1 macro.

Macro lens for small details

When is this a good fit? When labels or small components need to appear larger in the frame; check that the lens mount is compatible with your chosen camera body.

Trade-off: Nikon specifies 1:1 magnification for the Z MC 50mm, but for very close-up shots the front of the lens sits close to the subject, leaving less room for lighting.

Macro with focus stacking

When is this a good fit? When raised components at different distances need to be sharp in a single image, and you are happy to take and process several shots.

Trade-off: OM Digital Solutions lists the M.Zuiko ED 60mm F2.8 Macro as compatible with focus stacking on the OM-5 Mark II. According to the manufacturer, processing crops around 7% from the edges of the image.

What to consider What to check before buying Who should pay particular attention?
Magnification and lens mount Compare the maximum magnification of the exact lens and check that its mount fits the camera body. I want small labels or solder joints to remain legible in the final crop. Around 33% of consumers prioritise detail.
Colour and product accuracy Assess test shots under your own lighting, check the white balance and make sure important product features remain visible. The ACM warns that inaccurate or incomplete information can give consumers a misleading impression of what is on offer. I take several product photos and want the colour and lighting to stay consistent without misrepresenting what is on offer. Around 27% of consumers give product accuracy top priority.
Sharpness at different heights Check focus bracketing or stacking for the exact camera and lens combination, and test whether the whole circuit board stays within the frame. I want raised components to look sharp and need to know whether one shot will be enough. Around 20% of consumers prioritise sharpness across different heights.
What’s included in the camera kit Check which lens actually comes with the camera body and whether it offers enough magnification for your smallest detail. I want to know in advance whether the supplied lens will do the job or whether I’ll also need a macro lens. Around 20% of consumers give the completeness of the kit top priority.

Common buying pitfalls

  • Mistaking a kit lens for a true macro lens

    According to Canon, the RF-S 18-45mm offers maximum magnification of 0.25× in the specified MF use. That’s different from the 1:1 magnification Nikon quotes for the Z MC 50mm.

    Compare the quoted magnification of the exact lens included with the smallest detail you want to show.

  • Confusing the minimum focus distance with the working space in front of the lens

    Fujifilm measures the minimum focus distance of the XF30mmF2.8 R LM WR Macro from the sensor plane. That figure alone doesn’t tell you how much space there will be between the lens and the circuit board.

    Test the magnification you need with the lens, tripod and lighting in the setup you plan to use.

  • Using focus stacking without leaving extra space around the circuit board

    For the OM-5 Mark II and M.Zuiko ED 60mm F2.8 Macro combination, OM Digital Solutions reports that stacking crops around 7% from the edges of the image.

    Leave extra space around the circuit board and check the final crop before publishing the photo.

  • Assuming a business purchase has the same terms as a consumer purchase

    The Chamber of Commerce distinguishes between business and consumer purchases. It notes that some small businesses may be entitled to similar protections, depending on the circumstances.

    Before ordering, check which terms apply to your purchase and contract.

Brands and lens combinations to consider

The differences below relate to the camera and lens combinations listed. When choosing, pay particular attention to magnification, the space available for lighting and support for focus stacking.

Canon

The EOS R50 is a compact mirrorless camera that you could pair with a standard zoom or a compatible RF macro lens.

  • Canon specifies 24.2 MP and focus bracketing for the EOS R50. Canon lists the RF 100mm F2.8L Macro IS USM as compatible with this camera body and gives that lens a maximum magnification of 1.4×.
  • These specifications apply to the models listed and don’t tell you which lens is included with every kit. Check the lens and the space you need for lighting in your own setup.

Nikon

The Z50II is a DX camera body that can be used with Z macro lenses, including the Z MC 50mm for close-ups.

  • Nikon specifies 20.9 million effective pixels for the Z50II and 1:1 magnification for the Z MC 50mm.
  • For very close-up shots, the front of the Z MC 50mm sits close to the subject. Check whether your setup still leaves room for lighting.

OM SYSTEM

The OM-5 Mark II paired with the M.Zuiko ED 60mm F2.8 Macro is worth considering if in-camera focus stacking is important to you.

  • OM Digital Solutions lists this lens as compatible with stacking mode and specifies 1:1 magnification on Micro Four Thirds.
  • According to the manufacturer, stacking crops around 7% from the edges of the image. Test the available working space and leave room for cropping.

Sony

The FE 90 mm F2.8 Macro G OSS is a macro lens with an E-mount that has been considered for this guide.

  • Sony specifies 1.0× magnification and a minimum focus distance of 0.28 m for this lens.
  • The quoted focus distance is a lens specification, not the working space in front of the lens. Check how it works with your chosen camera body and lighting.

Fujifilm

The XF30mmF2.8 R LM WR Macro with an X mount is an option considered for detail shots and general tabletop photography.

  • Fujifilm specifies 1× magnification and a minimum focus distance of 0.1 m for this lens, measured from the sensor plane.
  • The distance from the sensor plane doesn’t tell you how much space there will be between the front of the lens and the circuit board. Test whether there’s room for lighting at the magnification you need.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need a 1:1 macro lens for every circuit board photo?

No, not if a standard zoom clearly captures the whole circuit board and the details you need. Take a test shot using the crop and output size you need; Canon gives the RF-S 18-45mm a maximum magnification of 0.25× in the specified MF use.

How can I get raised components at different heights in focus?

First, check whether one shot gives you enough sharpness. If not, focus stacking can combine shots taken at different focus points. Check that the feature and lens are compatible with your chosen camera, and allow for possible cropping.

How can I keep the colours consistent across a series of online shop photos?

Use the same lighting as far as possible and assess the white balance with test shots. Canon explains that light sources can cause a colour cast, so check the result against the actual product.

Is the minimum focus distance the same as the working space in front of the lens?

No. Fujifilm measures the minimum focus distance of the XF30mmF2.8 R LM WR Macro from the sensor plane; this isn’t the working space between the lens and the subject. Test the lens, lighting and circuit board together at the magnification you need.

Do consumer returns and consumer protections automatically apply to a business camera purchase?

No, don’t assume that they do. The Chamber of Commerce distinguishes between business contracts and consumer purchases, and explains that some small businesses may be entitled to similar protections, depending on the circumstances. Before ordering, check the terms that apply to your contract.