Who is this buying guide for?

Circuit board detail photographer

Wants to capture labels, tracks or solder joints at a large enough size, and chooses the magnification ratio based on the smallest subject. Product information from Canon Europe, Nikon and Laowa gives details of different maximum magnifications.

Photographer working in a dark studio setup

Wants to light shiny components without unwanted reflections or lens shadows, so pays attention to working distance and light placement. Nikon and Canon describe points to consider around working distance and macro lighting.

Owner of an existing mirrorless camera

Wants a macro lens that suits their camera’s mount and preferred controls, so compares the version and focusing options. Sigma and Laowa list differences between versions for each mount.

What should you look for when choosing?

First, work out how small the detail you want to capture is. Then check that your camera, lens and lighting will all fit into your setup.

What to consider What should you check? Who is this most relevant to?
Magnification Compare the maximum magnification ratio with the framing you want; check the composition with your own camera. If I want to photograph tiny labels or solder joints individually, I prioritise magnification for detail. Around 24% of consumers have the same main priority.
Light and reflections Take test shots with the light in different positions and check for reflections and shadows on the circuit board. If I’m photographing shiny components against a dark background, I want to be able to move the light without causing distracting reflections. Around 19% of consumers prioritise control of the lighting.
Camera mount and controls Check the exact mount and version, and find out how focusing and aperture are controlled. If I want to keep using my existing camera, the lens needs to suit its mount and the controls I prefer. Around 24% of consumers give compatibility top priority.
Depth of field Check whether your camera supports focus bracketing if you want to use focus stacking; also test a single shot. If components at different heights need to be in focus, I want a method that works for this. Around 19% of consumers prioritise sharpness across different heights.
Working space for lighting Check the clear space in front of the lens at the magnification you use; the closest focusing distance is not the same thing. If my light or diffuser needs to be close to the circuit board, I need room for both the lens and the lighting. Around 14% of consumers make working space their top priority when choosing.

Common buying mistakes

  • Confusing the closest focusing distance with the working space in front of the lens

    Focusing distance is not measured as the clear space between the front of the lens and the subject. For the Z MC 50mm at its closest setting, Nikon specifies around 5 cm between the front of the lens and the subject; this figure applies to that specific model.

    Compare the available working distance at the magnification you want to use, and test whether you can position your lighting outside the frame and away from the lens’s shadow.

    You may spend time repositioning lights or rearranging your setup.

  • Choosing a 2× macro lens without checking the controls for each mount

    Controls can vary between versions. According to Laowa, only the Canon EF version of the 100mm f/2.8 2x Ultra Macro APO has a chip and motor for aperture control through the camera; the other versions are operated manually.

    Before buying, check the full model name, mount and controls for your camera body.

    Different controls may mean you need to adjust the way you work.

  • Stopping down further and further as the only way to keep components in focus

    A smaller aperture can increase depth of field, but Nikon warns that stopping down too far can also reduce detail because of diffraction.

    Keep the circuit board and camera steady, then compare a single shot with a focus bracketed sequence if the subject is stationary.

    A focus bracketed sequence may take extra time to shoot and merge.

Brands and relevant macro lens ranges

Canon

Canon offers RF macro lenses with different maximum magnifications.

  • Canon Europe lists a maximum magnification of 1.4× for the RF 100mm F2.8L Macro IS USM.
  • For the RF 85mm F2 Macro IS STM, Canon lists a maximum magnification of 0.5×. This difference alone says nothing about how sharp a photo of an entire circuit board will be.

Nikon

For Nikon Z, the range includes 50mm and 105mm macro models with a maximum magnification ratio of 1:1.

  • Nikon specifies around 5 cm of clear space in front of the Z MC 50mm lens at its closest setting.
  • That distance applies to this model and doesn’t tell you the working distance of the Z MC 105mm.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available with Sony E and L-Mount options.

  • Sigma lists autofocus and a closest focusing distance of 29.5 cm.
  • The teleconverter compatibility listed by Sigma applies only to the L-Mount version.

Laowa

The 100mm f/2.8 2x Ultra Macro APO is worth comparing if you want magnification of up to 2:1 and are happy with manual controls.

  • Laowa lists a maximum magnification of 2:1.
  • According to Laowa, only the Canon EF version has a chip and motor for aperture control through the camera; the other versions are operated manually.

Sony

The FE 90mm F2.8 Macro G OSS is a 1:1 macro lens for Sony E-mount cameras.

  • Sony lists compatibility with full-frame and APS-C E-mount cameras, as well as optical stabilisation.
  • Stabilisation doesn’t replace checking depth of field when components at different heights need to be in focus.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you always need 1:1 for an entire circuit board?

No. First decide how large you want the circuit board or detail to appear in the frame. A lens with a maximum magnification of 0.5× may be enough for a wider composition; 1:1 or more is more useful when you want to capture tiny individual details. Check the framing with your own camera and subject.

How can you keep components at different heights in focus?

Keep the camera and circuit board steady, then compare a single shot with a focus bracketed sequence. Focus stacking combines the sharp areas from several images. Nikon warns that stopping down too far can also reduce detail because of diffraction. Check that your camera and software support the method you want to use.

Do you need special lighting for a dark background?

Not necessarily. First check whether your existing lighting shows the details without distracting reflections or shadows. Canon describes additional macro lighting as a useful aid when working close to the subject makes it difficult to position the light. The dark background itself isn’t a feature of the lens.

What are your rights when buying a macro lens online in the Netherlands?

For a standard online purchase by a consumer, ACM ConsuWijzer says you will generally have up to 14 days after delivery to change your mind, although exceptions apply. Your statutory warranty is separate from any manufacturer’s warranty: if a product doesn’t perform as you could reasonably expect during normal use, the retailer is responsible for providing a solution under the applicable terms.