Owner of passive speakers
You want to keep your existing speakers in your hobby room and are first looking for an amplifier whose permitted load and connections are suitable for your setup.
Start with your passive speakers and the source of your choral recordings: check that the speaker load and connections are compatible with the exact amplifier model. A standard stereo amplifier may be all you need for CDs or other wired sources; choose built-in network streaming if you want to listen directly through a supported service. Manufacturer specifications alone won’t tell you how a particular speaker-and-amplifier combination will sound in your hobby room.
You want to keep your existing speakers in your hobby room and are first looking for an amplifier whose permitted load and connections are suitable for your setup.
You mainly play choral recordings from an existing source. The right analogue or digital input determines whether you can connect it without an extra source device.
You want to play music through a supported network service or from your phone. Make sure you understand the difference between network streaming and Bluetooth.
Choose this when: you mainly connect a CD player or another source for which the model has a suitable input.
The trade-off: you may need a separate, compatible source for a network service you want to use.
Choose this when: you want to play choral recordings directly through a supported network service on passive speakers.
The trade-off: check whether your music service and preferred controls are supported by each model; features may vary between versions.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Speaker load | Check your speakers’ impedance and recommendations against the permitted load of the exact amplifier model. When comparing stated power outputs, always take their measurement conditions into account. | I want to keep my passive speakers and check that they’re compatible with the amplifier. This is a priority for around 36% of consumers who put their speaker setup first. |
| Connection for your source | Note the output on your CD player, turntable or other source, and check that the model you choose has a suitable input. If you have a turntable, also check whether it has the phono preamp you need. | I want to connect my existing music source without using an unnecessary extra device. A suitable source connection is the top priority for around 29% of consumers. |
| Streaming | Check the music service, playback protocol and control method you want for each model. Bluetooth and network streaming are different features. | I want to play my choral recordings wirelessly and need to know whether I need Bluetooth or a network service. Streaming is the top priority for around 21% of consumers. |
| Positioning and controls | Measure the available space and allow for cables and the ventilation instructions for the exact model. Also decide whether you want physical controls or app-based control. | I want to position the amplifier in my hobby room in a way that suits the space and follows the instructions. Positioning and controls are the top priority for around 14% of consumers. |
A wattage figure alone doesn’t tell you how two amplifiers compare. Sony specifies 2 × 100 W at 8 ohms, 1 kHz and 1% THD for the STR-DH190; Yamaha gives 60 W + 60 W at 8 ohms, 20 Hz–20 kHz and 0.019% THD for the A-S301. The measurement conditions are different.
For each power rating, check the impedance, frequency range and distortion. Then make sure the specifications are suitable for your speakers.
Bluetooth reception isn’t the same as built-in network streaming. Denon lists Bluetooth for the PMA-600NE, for example, while WiiM also lists network connectivity and streaming services for the Amp.
Make a note of how you want to play your choral recordings, then check that the exact model supports it.
If an amplifier doesn’t support the network service you want, you may need a separate network player for that type of playback.
The dimensions of the case don’t tell you how much additional space your setup needs. Yamaha’s manual says not to block the ventilation openings.
Measure the space available and check the installation instructions for your chosen model before buying.
The A-S301 is an integrated amplifier for anyone looking to combine analogue sources with optical or coaxial digital connections.
The PMA-600NE may suit a setup that uses Bluetooth, digital inputs and MM phono.
The PM6007 is designed for a wired, two-channel setup with analogue and digital sources.
The STR-DH190 is a two-channel stereo receiver with Bluetooth, phono and analogue connections.
The WiiM Amp combines amplification for passive speakers with network streaming. The Amp Pro is a separate version with different connectivity specifications.
No. Check your speakers’ specifications against the permitted load of the exact amplifier model. For example, Sony specifies 6–16 ohms for the STR-DH190; this isn’t a limit that applies to all amplifiers.
Follow the manual for your chosen model. Yamaha’s manual for the A-S301, among other models, says not to block the ventilation openings and to clean the device with a dry cloth only. Check that your furniture and the space for cables allow you to position it in line with these instructions.
If you buy from a business in the Netherlands, you’re entitled to a product that works properly, and the seller must provide a solution if there’s a problem. According to the Dutch government, the Netherlands has no fixed statutory guarantee period. For eligible distance purchases, you generally have a 14-day cooling-off period; check the terms that apply to your purchase.
No, the CE marking isn’t an independent assessment of sound quality. According to the European Commission, it indicates that the manufacturer considers the product to meet the applicable EU product rules that require CE marking. The rules that apply depend on the device’s specifications.