Who is this guide for?

Recording a choir in a challenging room

You want to capture the voices clearly without the untreated room overpowering the recording. Bax Music and Shure explain why microphone placement and distance need careful consideration.

Recording a choir alongside other sources

You may want to record accompaniment or choir sections simultaneously onto separate tracks. To do this, count the built-in microphone preamps, not just the total number of inputs.

Monitoring the recording as you go

You want to listen and check levels during the rehearsal, without choosing extra channels that your setup won’t use. MOTU and Audient’s model specifications describe features including metering and monitoring.

What should you look for when choosing?

What to consider What to look for Who is this important for?
Balance between the choir and the room Make test recordings from different microphone positions and assess the whole choir, not just the front row. If I want to hear the choir clearly without the room overpowering it, I’ll test the placement first. This balance is the top priority for around 36% of consumers.
Number of microphones used simultaneously Plan your setup and count the built-in microphone preamps; line inputs are not extra microphone inputs. If I want to record sections or accompaniment separately, for example, I’ll need enough microphone preamps to use at the same time. This is the main concern for around 29% of consumers.
Monitoring during recording Check how to read the input levels, listen to the signal through headphones and use the interface with your computer and software. If I want to check that the levels and sound are usable during the rehearsal, I’ll look for metering and monitoring features. This is the most important requirement for around 21% of consumers.
What you need for the complete setup Allow for microphones, stands and cables; ADAT expansion requires additional compatible equipment. If I want to know what my complete recording setup will require in advance, I’ll weigh up the extra channels against the equipment I’ll actually use. The complete setup is the top priority for around 14% of consumers.

Common pitfalls

  • Assuming four inputs means four microphone inputs

    On the Focusrite Scarlett 4i4 4th Generation and MOTU M4, two of the four analogue inputs are line inputs, not built-in microphone preamps.

    Check the specifications for the exact version and generation to see how many microphone preamps it has.

    If you want to connect more microphones later, you may need an additional preamp or a different interface.

  • Buying more channels to solve reverberation

    Extra inputs won’t automatically change the acoustics or the balance between the choir and the room. Microphone placement will still affect the recording.

    Try a simple setup first, and only expand if you have sources you genuinely want to record separately.

    Extra microphones, stands and cables mean more setup work, and won’t in themselves reduce the room sound.

  • Assuming an ADAT input gives you extra microphone inputs

    The Audient iD14 MKII has two built-in microphone preamps; the optical ADAT input won’t connect extra microphones on its own.

    Check what additional compatible equipment you’ll need for the complete expansion setup.

    Expansion may require a separate compatible unit.

  • Treating recording and sharing as the same step

    An identifiable audio recording may contain personal data. Processing it may require a lawful basis under the GDPR; copyright conditions may also apply to protected music.

    Before sharing the recording, decide on its purpose and audience, and check which privacy and music rights apply to your use.

Relevant brands to consider

Focusrite

Scarlett models vary in the number of built-in microphone preamps and their expansion options.

  • According to the official product specifications, the Scarlett 2i2 and 4i4 4th Generation each have two microphone preamps; the Scarlett 18i16 4th Generation has four and offers ADAT.
  • The 4i4’s additional inputs are line inputs. Four inputs therefore don’t mean four built-in microphone preamps.
  • Focusrite says the Scarlett models mentioned offer Auto Gain and Clip Safe.

Solid State Logic

The SSL 12 is worth considering if you want to record four microphones simultaneously onto separate tracks.

  • Solid State Logic’s manual lists four built-in microphone preamps and two headphone outputs.
  • These specifications don’t demonstrate how its sound quality compares in an untreated room during a choir rehearsal.

Behringer

The UMC404HD is an option for connecting four microphones with built-in microphone preamps.

  • Behringer lists four XLR/TRS combo inputs and +48 V phantom power.
  • The manufacturer’s sound quality claims aren’t a comparative measurement for choir recordings.

Audient

The iD14 MKII suits a two-microphone setup now, with the option to expand via an optical connection later.

  • Audient lists two built-in microphone preamps, Monitor Mix and an optical ADAT input.
  • Extra ADAT channels require additional compatible equipment; the input doesn’t add microphone connections by itself.

MOTU

The M4 is worth considering for a stereo pair if you want to read the levels and monitor directly.

  • MOTU specifies two microphone preamps, separate phantom power and metering.
  • The other two analogue inputs are line inputs, not additional built-in microphone preamps.

Joybuy products

Related products coming soon.

Frequently asked questions

Will a more expensive interface reduce reverberation in our rehearsal room?

Not by itself. Make a test recording first and listen to how the distance and position of the microphones affect the balance between the choir and the room. An interface won’t automatically fix poor microphone placement; Bax Music and Shure explain why placement matters.

What should I test before the first rehearsal?

Check that each microphone can be connected to a suitable input, and switch on phantom power if the microphone you’re using requires it. Make a short test recording, listen through headphones and check that your computer and recording software recognise the interface.

Who can help if the product is faulty, and do I need an extra warranty?

For a consumer purchase in the Netherlands, the seller must provide a solution if the product is faulty. According to the Dutch government, there’s no fixed statutory warranty period; a manufacturer’s or extended warranty is in addition to your statutory rights. Check what an extra warranty covers before taking one out.

Can the choir record the rehearsal and share it online?

That depends on what you record and how you use the recording. An identifiable audio recording may be personal data; processing it therefore requires a lawful basis under the GDPR, and consent is one option. Rights or licences may also apply to protected music. Before publishing, decide on the purpose and audience, and check the relevant privacy and music rights.