Who is this buying guide for?

Choir recording editor with few power sockets

You edit existing recordings and want to know whether your computer can power an interface without an extra mains adapter.

Editor who wants to listen closely

You switch between headphones and your existing speakers. Bear in mind that active speakers need their own power supply too.

Editor who also records

You want to connect one or two microphones, so you’ll need to check how many inputs you need to use at the same time and whether your microphones require phantom power.

What should you look for?

When editing existing choir recordings, your choice mainly depends on your current listening setup, the power sockets you have available and whether you also make new recordings.

Existing computer output

Choose this if: you’re editing existing audio files and your computer’s output already works with your headphones or listening setup.

Bear in mind: you won’t get dedicated interface outputs or physical headphone controls.

Bus-powered interface

Choose this if: you want a dedicated headphone output and your computer port can supply enough power.

Bear in mind: a USB connection or passive hub won’t necessarily supply enough power.

Two microphone inputs

Choose this if: you may want to record up to two microphones at the same time on separate tracks.

Bear in mind: two inputs won’t be enough if you want to record more than two microphones at once.

More than two microphone tracks

Choose this if: you want to record several microphones at the same time on separate tracks.

Bear in mind: the two-channel models below won’t meet this need; if you choose a larger model, check how it’s powered too.

What to consider What should you look for? Who is this important for?
Works without an extra power socket Compare the exact model’s power requirements with your computer port, cable and any hub you use. Focusrite specifies a minimum of 5 V at 0.9 A for the Scarlett 2i2 4th Gen. If I don’t want to use a power socket for an interface, I first check whether my computer port can power the model. Around 36% of consumers give top priority to powering it without an extra socket.
Monitoring connections Check that the headphone plug, speaker connections and volume controls are compatible with your existing equipment. I want to listen back to existing recordings properly and adjust the volume easily. Around 29% of consumers prioritise suitable monitoring connections.
Inputs for new recordings Count the microphones you want to record at the same time, and check that the inputs and any phantom power are suitable for them. If I also want to record up to two microphones at once, as well as edit, I need to check how many usable inputs there are. Around 21% of consumers make recording additional material their top priority when choosing.
Computer and software Compare the system and any driver requirements with your computer, and check which USB port and cable you’ll use. I want to know in advance whether the interface will work with my computer and software, rather than relying on the shape of the connector alone. Around 14% of consumers prioritise this compatibility.

Common buying mistakes

  • Assuming USB-C means there’s enough power

    The connector shape alone doesn’t tell you how much power a port or hub can supply. Focusrite specifies a minimum of 5 V at 0.9 A for the Scarlett 2i2 4th Gen; Arturia warns that some passive hubs may not supply enough power to a MiniFuse 2.

    Check the exact model’s power requirements and the capabilities of the port or hub you’ll actually be using.

  • Paying for extra microphone inputs when you only edit existing files

    When playing back and editing existing recordings, monitoring outputs and controls are what matter. You only need microphone inputs if you’re recording new audio yourself.

    First decide whether you’ll be making new choir recordings and how many microphones you’ll want to use at the same time.

  • Forgetting that active speakers need their own power

    An interface’s USB power won’t automatically power the active speakers connected to its line outputs.

    Count the available power sockets for your whole listening setup. Using headphones may give you a different setup.

Brands to compare

Focusrite

The Scarlett 2i2 4th Gen is a two-channel model to consider if you want to connect two microphones and have separate volume controls for your headphones and main output.

  • Focusrite specifies USB power and a minimum power requirement of 5 V at 0.9 A.
  • Focusrite says a separate power supply may be needed if there isn’t enough power. Plugging into the jack socket on the front disables the microphone input on the same channel.

MOTU

According to MOTU, the M2 is a two-channel USB-powered interface with two combination microphone inputs and separate controls for headphone and monitor volume.

  • The published M2 specifications list individually switchable 48 V phantom power for each input, as well as balanced TRS and mirrored RCA outputs.
  • USB bus power doesn’t guarantee that every computer port or hub will supply enough power; check your own setup.

Arturia

According to Arturia, the MiniFuse 2 is a two-channel interface with a headphone output and a built-in USB hub. It’s worth comparing if you also want to connect a USB device.

  • Arturia specifies power via the computer connection, separate headphone volume control and balanced stereo outputs.
  • Arturia warns that a passive hub may not supply enough power. The built-in hub isn’t an unlimited power source.

Audient

Audient describes the EVO 4 as a USB bus-powered 2-in/2-out interface with headphone and speaker outputs.

  • Audient lists Monitor Mix and Smartgain as features of the EVO 4.
  • If you’re only editing existing files, a recording gain-setting feature isn’t in itself a reason to choose this model. Audient’s statements about sound quality are manufacturer claims.

Audio interfaces on Joybuy

Related products will be available soon.

Frequently asked questions

Do I need an audio interface to edit existing choir recordings?

Not necessarily. If your computer’s audio output works well with your headphones or listening setup, you can start with that. An interface is useful if you need different outputs, physical volume controls or microphone inputs for new recordings.

Can I connect a USB interface to any USB-C port or passive hub?

Don’t assume it will supply enough power: USB-C describes the connection, not the available power. Arturia warns that some passive hubs may not supply enough power to the MiniFuse 2; Focusrite specifies a minimum of 5 V at 0.9 A for the Scarlett 2i2 4th Gen.

What about the warranty on an audio interface in the Netherlands?

When you buy as a consumer, your statutory guarantee applies alongside any manufacturer’s warranty. According to the Netherlands government, there is no fixed statutory warranty period in the Netherlands; the retailer must resolve problems with products that are faulty.

Does a CE logo on its own prove that an interface is safe?

No. According to the Netherlands Enterprise Agency, CE is a conformity marking that indicates the manufacturer declares the product meets the applicable EU requirements; it is not an independent quality mark or a guarantee of safety. The rules that apply to a specific electronic device must be established for each product.