Who is this guide for?

Artists with large or tricky-to-light work

These artists want to capture light and dark areas across the whole sheet of paper and can control the lighting from both sides. The Canadian Conservation Institute describes using lights on either side as a way to illuminate a surface evenly.

Artists working in a shared studio

These artists need to set up, position and pack away their lighting regularly without occupying the workspace for too long. Foldable models and a carrying bag can make packing away easier; check the specifications for the model you choose.

Artists with an existing studio light

These artists are looking for a suitable light modifier rather than automatically buying a complete kit. Check the light’s mount and exactly what’s included with the softbox.

What should you consider when choosing?

Two lights with softboxes

Choose this if: you regularly photograph larger sheets and have space on both sides. Start with a symmetrical setup, with the lights at around 45 degrees, and check the brightness in the corners.

Bear in mind: you’ll need two suitable light sources and space for the stands. This setup is less practical if the workspace is rearranged frequently.

One softbox on an existing light

Choose this if: you already have a suitable light and want to keep the setup compact. Take a test shot to see whether the whole sheet is lit evenly enough.

Bear in mind: a single light source may produce less even lighting on the opposite side. Compatibility and any extra equipment needed depend on the model.

Diffuse daylight

Choose this if: you have suitable indirect daylight and can use it to illuminate the whole sheet evenly.

Bear in mind: daylight can vary, and direct sunlight can cause problems. Kunstwerkt warns that bright sunlight can create harsh shadows.

What to consider What to check before buying Who is this important for?
Even tonal reproduction Check whether the lights, softboxes and available distance can illuminate the whole sheet; review a test shot right into the corners. I want to capture light and dark areas across the whole sheet of paper, without distracting differences in brightness around the edges. Around 36% of consumers prioritise even reproduction.
Space and storage Check the folded dimensions, whether a carrying bag and grid are included, and how much room the light and stand need when set up. I share my workspace and want to pack away my setup quickly afterwards without getting in anyone’s way. Around 29% of consumers prioritise space and ease of storage.
Compatibility and a complete setup Compare the mount and package contents with your light and stand; a standalone softbox is not necessarily a complete lighting kit. I already have lighting equipment and want to check that the modifier will fit before buying anything else. Around 21% of consumers want to add compatible equipment to what they already own.
Handling the original with care Position and test the lights before laying out the drawing, so you have to move the sheet as little as possible. I want to handle a delicate charcoal drawing as little as possible while setting up. Around 14% of consumers prioritise handling the original with care.

What to look out for when buying

  • Mistaking a standalone softbox for a complete lighting kit

    A softbox is a light modifier and needs a compatible light source. A setup with light on both sides requires two light sources.

    Before buying, check the mount and package contents, and see whether you’ll also need a light or stand.

    If you don’t already have a suitable light, you’ll need to arrange one separately; you may also need a stand.

  • Assuming a grid automatically improves reproduction

    A grid can limit the spread of light, but that doesn’t prove it will illuminate the whole sheet evenly.

    Take a test shot with and without the grid, paying particular attention to the corners of the paper.

  • Moving the drawing repeatedly to adjust the lighting

    The Canadian Conservation Institute identifies frequent handling as a major cause of damage to artwork on paper.

    Prepare the setup as much as possible and position the lights before laying out the original.

Relevant brands to consider

Godox

Godox lists the SB-FW6090 as a 60 × 90 cm rectangular softbox with a Bowens mount.

  • A potential light modifier if you already have a compatible light.
  • The model specifications don’t tell you whether the lighting will be even in your setup; a light and stand are not necessarily included.

SmallRig

SmallRig describes the RA-R6090 as a 60 × 90 cm rectangular quick-release softbox with a Bowens mount and fabric grid.

  • The manufacturer lists quick assembly and compatibility with specific SmallRig lights and other lights with a Bowens mount.
  • Check that your light has the same mount and that the grid covers the whole sheet.

Bresser

Bresser lists a foldable design, Bowens mount, inner and outer diffusers, grid and carrying bag for the Quick Lock 60x90 Softbox.

  • The carrying bag and setup method may suit those who need to pack away their equipment regularly.
  • The listed contents don’t include a light or stand; the product specifications don’t guarantee even lighting for a charcoal drawing.

NEEWER

The European manufacturer’s page lists the NS93P as a 60 × 90 cm rectangular Bowens softbox with a quick-release mechanism, diffusers and grid.

  • The manufacturer gives folded dimensions of 78 × 16 × 6,5 cm.
  • Those dimensions don’t indicate how much space the softbox takes up when assembled with a light and stand, or how the sheet will ultimately be lit.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Do you need two softboxes for every charcoal drawing?

No, two lights on either side aren’t essential in every case. The Canadian Conservation Institute describes a setup with lights at around 45 degrees as a way to achieve even lighting. If you have suitable diffuse daylight or get good results from a test shot with one light, you may need less equipment.

How should you position the lights and camera for a documentary photograph?

Start with even lighting on both sides and check the corners and tonal values in a test shot. For a flat artwork, Kunstwerkt recommends positioning the camera directly in front of the sheet.

How should you handle the drawing while setting up?

Position the lights as much as possible before laying out the artwork, and handle the paper as little as possible. The Canadian Conservation Institute identifies frequent handling as a major cause of damage to artwork on paper.

Does a standalone softbox include a light?

Don’t assume it does: check the package contents and mount for the exact model. The models listed are light modifiers with a mount for a separate light.