Who is this choice relevant to?

Listener with passive speakers

You want to keep using your existing stereo speakers, so your first step is to choose an amplifier that suits their specifications and your listening position.

Listener who streams music

You want to play chamber music from a supported music service, with as few separate devices as possible on your desk.

Listener with CDs or records

You already have physical music sources and want to find the right analogue, digital or MM phono connection.

What should you look for when choosing?

Start with your speakers’ specifications and the output of the music source you use most. Then decide whether you need built-in network streaming and whether the device will fit comfortably into your workspace.

Consideration What to look for Who is this important for?
Passive speakers Check your speakers’ impedance and the supported speaker load for the exact amplifier model. Only compare power ratings when the impedance and measurement conditions are the same. If I want to keep using my passive speakers, I need to know whether they’re compatible with the amplifier; around 33% of consumers prioritise this compatibility.
Digital music source Note your source’s output and check whether you need an optical or coaxial input, Bluetooth or built-in network streaming. If I mainly listen through a digital source, I want the right connection or service without unnecessary extra devices; around 25% of consumers prioritise digital access.
CD player or turntable Check your CD player’s output and whether your turntable has an MM cartridge or its own phono preamp. Compare these with the model’s inputs. If I want to keep playing my CDs or records, I’m looking for an amplifier with the corresponding connection; around 25% of consumers prioritise compatibility with their source.
Space and controls Measure the space available for the device and its cables. Decide whether you want physical controls, a remote control or app controls. If I share a desk or have a small one, I want the device and its controls to fit into my workspace; around 17% of consumers prioritise this practical consideration.

Common selection mistakes

  • Comparing wattage without checking the measurement conditions

    Power ratings may be measured at different impedances or frequencies. The highest figure doesn’t automatically tell you which amplifier will suit your speakers.

    Compare ratings measured at the same impedance and under the same conditions, and check separately which speaker load the exact model supports.

  • Confusing a digital input with network streaming

    An optical or coaxial input connects a compatible digital source, but it doesn’t automatically mean the amplifier can play music services over a network. Bluetooth is not the same as built-in network streaming either.

    Choose based on the output and service you actually use, and check the features of the exact version.

    If the network feature you want isn’t included, you may need a separate streamer.

  • Overlooking your listening position

    Speaker placement can affect the stereo image at your desk; changing the amplifier won’t automatically change the placement.

    Consider where you can position two speakers in relation to your seat, then measure the space available for the device.

Brands to consider

Yamaha

The A-S301 is a wired integrated amplifier for analogue sources and digital sources with an optical or coaxial output.

  • Yamaha Netherlands lists the A-S301 at 60 W + 60 W at 8 ohms, 20 Hz–20 kHz and 0.019% THD, with optical and coaxial digital inputs.
  • The stated dimensions are 435 × 151 × 387 mm. These are manufacturer specifications, not the result of an independent listening test; check the dimensions and connections to make sure they suit your workspace.

Denon

The PMA-600NE combines digital inputs, Bluetooth and MM phono for anyone using a range of different sources.

  • The European manual lists 45 W + 45 W at 8 ohms and 20 Hz–20 kHz, with speaker terminals for 4–16 ohms.
  • Bluetooth is not the same as built-in network streaming. Only compare the power rating with models measured under the same conditions.

Marantz

The PM6007 is a wired integrated amplifier with analogue and digital inputs, plus MM phono.

  • Marantz lists 45 W per channel at 8 ohms and 20 Hz–20 kHz, with optical and coaxial inputs.
  • The Dutch product page doesn’t list built-in Wi-Fi or Bluetooth for this model. Check that its connections suit your source.

WiiM

The WiiM Amp combines network streaming and amplification for passive speakers.

  • WiiM lists features for the Amp including Wi-Fi, Ethernet, speaker outputs and gapless playback.
  • Services and features depend on the model. The Amp and Amp Pro are different versions, so check the specifications for the exact model.

Cambridge Audio

The AXA35 is a wired option for a setup with a compatible turntable and speakers.

  • Cambridge Audio lists a built-in phono stage and 35 W per channel; its EU support page says it can be used with 8-ohm speakers.
  • According to the manufacturer, the USB port on the rear is intended for charging devices, not for adding Bluetooth with an adapter.

Joybuy products

Related products coming soon.

Frequently asked questions

Do your speakers need a stereo amplifier?

Passive speakers need an amplifier. For example, WiiM describes the Amp as being designed for passive speakers. Before choosing a model, check whether your own speakers are passive and compare their specifications with the amplifier’s supported load.

How should you set up your listening position for a clear stereo image?

Start by positioning the left and right speakers as symmetrically as possible in relation to your seat. Genelec describes these placement principles for studio monitors; they don’t prove that a particular amplifier will sound better in your office.

Can you connect a turntable to any analogue input?

No. First check whether the turntable has its own phono preamp and which type of cartridge it uses. The Denon PMA-600NE and Marantz PM6007 we looked at have an MM phono input; compare this connection with your turntable’s specifications.

What warranty applies if you buy the amplifier in the Netherlands?

According to the Dutch government, you’re entitled to a product that works properly, but there is no fixed statutory warranty period in the Netherlands. If a product is faulty, the retailer is your point of contact for a solution; any manufacturer’s warranty is in addition to this.

Do you have a cooling-off period for an online purchase?

According to the Dutch government, in many cases you have 14 days to change your mind when buying online from a business. Check the terms of the specific purchase; this rule doesn’t automatically apply to purchases from a private seller.