If you don’t already have a suitable studio light, a complete continuous-light kit could be a good fit. If you have a compatible Bowens studio light, you could consider a standalone softbox. At a small desk, you’ll also need to think about space for the stand and camera, shadows cast by your hands, and how adjustable the light is. If you’re buying an electrical kit, also check that the version on offer is suitable for use in the Netherlands.
Which set-up is right for you?
Maker with limited set-up space
You film at a small desk and want to position the light and stand outside the painting area, or put them away when you’re finished. Dimensions and included components vary between the models reviewed; NEEWER, SmallRig, Godox and Aputure list these product specifications for their own products.
Teacher demonstrating paint colours
You want to assess paint colours as you explain, so you pay attention to the light settings and your camera’s white balance. A quoted colour-rendering value is not the same as an independent test of the final footage.
Filmmaker with an existing studio light
You’re looking for a standalone light modifier that fits your existing light, rather than a second complete kit. According to the manufacturers, the standalone models reviewed from SmallRig, Godox, Aputure and NEEWER have a Bowens mount; check that it’s compatible with your light.
What should you look for when buying?
Complete kit with one softbox
A good fit if: you don’t already have a suitable light and want to illuminate your work area from one side.
Bear in mind: light from one direction can leave shadows beneath your hands; also check the electrical specification of the kit.
Kit with two softboxes
A good fit if: you want to light the work area and the darker side of your hands or project separately, and have room for two stands.
Bear in mind: two set-ups need more space; NEEWER describes the NK103 as a kit with two softboxes, lights and stands.
Standalone softbox for a Bowens light
A good fit if: you already have a studio light with a compatible mount.
Bear in mind: a standalone light modifier doesn’t produce light. Check the mount, the stability of your set-up and which accessories are included.
| What to consider |
What to look for |
Who it matters to |
| Set-up space |
Measure the space around and above your desk. Allow for the softbox when opened out, the stand legs, camera and room for your hands. |
When I film at a small desk, I want to be able to position the light and stand outside the painting area. Around 33% of consumers say set-up space is their main buying concern. |
| Paint colours on camera |
Check whether the included light is adjustable, and set your camera’s white balance to match the lighting. |
When I’m explaining paint colours, I want to be able to assess them in a test recording. Around 27% of consumers give colour rendering top priority. |
| Clear view of your hands and project |
Make a short test recording while painting. Check whether a grid is included and whether there’s room for a second light position. |
If my hands block the light from reaching the brush or ceramic, I want to be able to see that while filming. Around 20% of consumers prioritise preventing shadows on the work area. |
| Compatible mount |
Compare the mount on your exact light with the softbox, and check separately what’s included in the box. |
If I already have a studio light, I want to avoid choosing a light modifier that won’t fit it. Around 20% of consumers say compatibility with their existing equipment is their main buying concern. |
Common buying mistakes
-
Mistaking a standalone light modifier for a complete lighting kit
A softbox shapes the light, but doesn’t produce it. So a standalone softbox can’t light a lesson on its own.
Before comparing models, check what’s included in the exact package and whether your light fits the softbox.
With a standalone light modifier, you may also need to arrange a compatible light and a stand.
-
Assuming a European product page confirms suitability for use in the Netherlands
The NEEWER SF40 product page lists an E26 fitting, but doesn’t confirm that the electrical version on offer is suitable for use in the Netherlands.
Before buying, ask for details of the fitting, mains voltage, plug and product information for the exact version on offer.
-
Looking only at the size of the diffuser
The position of the light and stand, your camera and your moving hands all affect how practical the set-up is at a small desk.
Measure the space and make a short test recording while painting before filming a long lesson.
Brands to consider
NEEWER
The ranges reviewed include complete kits such as the SF40 and NK103, as well as standalone Bowens light modifiers such as the NS36P.
- NEEWER says the SF40 includes one light and stand, while the NK103 includes two lights and stands.
- The SF40 product page lists an E26 fitting, but doesn’t confirm that the electrical version on offer is suitable for the Netherlands. The standalone NS36P requires a compatible Bowens light.
SmallRig
The RA-D55 reviewed is a standalone Bowens light modifier for anyone who already has a compatible studio light.
- SmallRig lists a diameter of 55 cm and an included grid.
- The RA-D55 isn’t a kit with a light source. The manufacturer’s claims about the light haven’t been independently tested for this painting lesson.
Godox
The SB-FW6060 reviewed is a square Bowens softbox for use with a compatible light.
- Godox lists a size of 60 × 60 cm and a Bowens mount.
- These specifications don’t tell you whether a light or stand is included; check the contents of the package on offer.
Aputure
According to Aputure, the Quick Dome 60 reviewed is a round Bowens light modifier that includes light-control accessories.
- Aputure lists diffusion, a 40° grid and a folded size of 53,0 × 7,0 × 5,7 cm.
- You’ll need to supply the light separately. The listed features aren’t the result of a comparison test with other brands.
Joybuy products
Related products coming soon.
Frequently asked questions
Is a standalone softbox enough to film a lesson?
No. A standalone softbox shapes light and needs a compatible light source. The standalone models reviewed from Godox, SmallRig and Aputure aren’t complete lighting kits. Check what’s included in the package for the exact version.
How can I prevent paint colours from changing during recording?
Set your camera’s white balance to match the lighting, then assess a test recording using the paint you’ll be working with. Nikon explains that white balance in mixed lighting can affect how colours appear on camera. A light’s quoted CRI value alone doesn’t guarantee how the final video will look.
What can I do if artificial light appears to flicker in my video?
Check the recording and your camera settings for shutter speed, frame rate and flicker reduction. Nikon explains that flicker can result from a mismatch between camera settings and the frequency of certain light sources. Follow your model’s manual when adjusting your camera.
What electrical product information should I check before using a product in the Netherlands?
Check the details for the specific light or kit, such as its power supply, plug and product information. EU guidance says CE marking is required for products covered by the relevant EU rules. The EU summarises the Low Voltage Directive as applying to electrical equipment designed for 50–1000 V AC or 75–1500 V DC. A standalone fabric softbox and an electrical kit aren’t necessarily subject to the same specific rules.
What are my rights if an online purchase doesn’t suit me or is faulty?
For consumer purchases made online, ACM ConsuWijzer describes a cooling-off period that ends 14 days after delivery; exceptions may apply. If a product is faulty, the seller is responsible for the statutory guarantee, according to the Netherlands Authority for Consumers and Markets. This is separate from any commercial guarantee.