Cellar film fan with weak Wi-Fi
You want to get Wi-Fi to one viewing spot without running a cable, and can place a repeater somewhere between the router and the cellar where it can still receive the router's signal.
For a single viewing spot, a wireless repeater is a sensible choice only if it can still receive a strong enough signal from the router. The Consumers' Association therefore recommends thinking carefully about where you place it and checking the connection on the playback device. If you can run an Ethernet cable to the cellar, a wired access point is an alternative that does not depend on a weak wireless signal passing through the floor. If running a cable is not an option and there is nowhere suitable for a repeater, you can try powerline using the sockets in your home.
You want to get Wi-Fi to one viewing spot without running a cable, and can place a repeater somewhere between the router and the cellar where it can still receive the router's signal.
You suspect the wireless signal to the cellar is the problem, and may be able to run a cable or try powerline through your sockets.
You want to improve coverage beyond your film-viewing spot, so you also need to consider the connection between multiple access points.
Choose this option if: you want to reach one room in the cellar and can find a spot where the repeater can still receive Wi-Fi from the router.
Bear in mind: the wireless connection still depends on placement and obstacles, such as the floor.
Choose this option if: you can run an Ethernet cable from the router to the cellar or a nearby spot.
Bear in mind: running a cable takes work; check that the device supports access point mode.
Choose this option if: running a cable is impractical and you cannot find a suitable spot for a wireless repeater.
Bear in mind: your home's electrical system can affect the connection; test the sockets you plan to use.
Choose this option if: other rooms besides the cellar also have poor coverage.
Bear in mind: check that the points work with your router or product range and can maintain a reliable connection with each other.
| What to consider | What should you check? | Who should consider this? |
|---|---|---|
| Signal at the repeater's location | Find a socket somewhere between the router and the cellar where the router's signal is still available, then test the connection by the TV or media player. | If you want to reach one viewing spot without a cable, you need a repeater that can still receive a signal from the router. Around 36% of consumers prioritise a strong enough signal at a wireless relay point like this. |
| Wired route to the cellar | Check whether running a cable is feasible and whether the device has access point mode; a connection for the TV does not automatically mean there is a cable to the router. | If you do not want to rely on a weak wireless signal passing through the floor, the connection to the cellar is your first priority. Around 29% of consumers prioritise a wired connection. |
| Powerline through sockets | Check whether the kit includes adapters for both ends, and test the sockets you plan to use with your playback device; electrical appliances can cause interference. | If you cannot run a network cable and want to avoid a wireless connection, internet over your home's electrical wiring is an alternative worth trying. Around 21% of consumers prioritise this option. |
| Coverage in several rooms | Check compatibility with your router or mesh product range and how the points connect to each other. | If rooms other than the cellar also have poor coverage, you will want to extend coverage beyond your film-viewing spot. Around 14% of consumers prioritise coverage in several rooms. |
A wireless repeater needs to receive the existing network signal itself. If you put it somewhere the router can barely reach, that will not automatically fix the connection to the cellar.
First, try a spot in between where the Wi-Fi signal still reaches. If there isn't one, compare a wired access point with powerline.
A TV can be connected by cable to a repeater that is itself connected to the router wirelessly.
Check which mode you are using and where the cable ends. For a wired connection to the router, there must be an actual cable running between the router and the access point.
A manufacturer's specification is not a measurement at your playback location. Electrical sources of interference can also affect powerline performance; devolo highlights this as something to bear in mind when using your home's electrical wiring.
Test the complete connection on your TV or media player in the setup you plan to use for streaming.
TP-Link describes the RE705X as a Wi-Fi repeater that can also work as a wired access point.
FRITZ! describes the FRITZ!Repeater 1200 AX as suitable for use with a FRITZ!Box and other routers.
The devolo Magic 2 WiFi 6 next Starter Kit offers a powerline option with Wi-Fi, providing an alternative route to the cellar.
The product picks below include powerline with Wi-Fi, wireless repeaters and access points for a wired route to the cellar.
No image available
A powerline starter kit is an option if there is nowhere suitable for a repeater and you cannot run a network cable.
Test the sockets by the router and in the cellar; electrical appliances can affect the connection.
No image available
A good fit if you are considering a wireless repeater and can find a spot where the existing network signal still reaches.
Check the connection by the TV or media player; the repeater still depends on the signal it receives where it is placed.
No image available
A repeater can work well for a cellar room if there is a spot where the existing network is still available.
Check the signal at your chosen location before relying on the connection at your playback device.
No image available
The product name lists both an access point and a Wi-Fi extender. A wired access point setup may suit you if you can run a cable to the cellar.
In extender mode, the connection still depends on the signal from the existing network. Check which mode and cabling your setup requires.
No image available
An access point is suitable for a wired route to the cellar if you can run an Ethernet cable there.
The product name specifies PoE power. Check that your setup includes a suitable wired PoE power source.
Place the repeater somewhere it can still receive the existing router signal, rather than automatically putting it next to the TV in the cellar. Then test the connection on the device you plan to use for streaming.
No. The TV may be connected to the repeater by cable while the repeater itself connects wirelessly to the router. For a wired connection to the router, you need a suitable access point or LAN setup and a cable to the router.
Test it on the TV or media player itself, where you plan to watch the film. Netflix describes an option in its app for checking the network connection; a test on a phone next to the router will not check the same location.
Check that you choose a kit with adapters for both ends, and test the sockets you plan to use. Devolo warns that electrical appliances can affect the connection, so check it on the playback device in the cellar.
The Dutch Authority for Digital Infrastructure states that radio equipment must meet the applicable European requirements and carry the correct CE marking. Check the marking on the device; a product listing alone is not proof of this.