Cellar user without a cable route
You want to download an audiobook in the cellar but can’t run a cable. In that case, it’s important to find an intermediate spot where an additional mesh node can still receive a usable signal.
A wireless mesh system is only a sensible choice if there’s an intermediate spot where the router’s signal is still usable. If there’s an Ethernet cable running to the cellar, compare a wired access point with a mesh system that supports Ethernet backhaul. For downloading an audiobook, a higher theoretical Wi-Fi speed alone isn’t a reason to choose a more expensive system.
You want to download an audiobook in the cellar but can’t run a cable. In that case, it’s important to find an intermediate spot where an additional mesh node can still receive a usable signal.
You can connect to the cellar with a cable and want to compare an access point with a mesh node that uses Ethernet backhaul.
You want to add Wi-Fi without replacing your modem or router straight away. So check how the system you choose connects to your existing equipment.
A good fit if: you can’t run a cable but have an intermediate spot where the mesh node can still get a usable connection to the router.
Keep in mind: walls, floors and placement all affect the connection between nodes. A stated coverage area doesn’t prove that you’ll get a signal in your cellar. The Consumers’ Association recommends keeping obstacles between Wi-Fi nodes to a minimum.
A good fit if: there’s an Ethernet cable running to the cellar, or you can install one, and you want to use several Wi-Fi nodes as a single system.
Keep in mind: you’ll need a cable route and a system that supports this connection. TP-Link lists Ethernet backhaul for the Deco X50; ASUS lists this option for the ZenWiFi XD5 when suitable Ethernet ports are available.
A good fit if: you mainly need Wi-Fi in the cellar and there’s an Ethernet cable available there.
Keep in mind: a standalone access point won’t necessarily offer the same unified management as a mesh system. Compare it as a solution for one wired Wi-Fi access point, not on the basis of an unproven performance advantage.
| What to consider | What to look for when buying | Who should pay particular attention? |
|---|---|---|
| Wi-Fi in the cellar | Test the connection in the cellar and in possible intermediate spots. Don’t judge the signal by a stated floor area. | I mainly want a usable connection where I download audiobooks. Around 36% of consumers say cellar coverage is their biggest concern when buying. |
| Connection between nodes | Check whether you can run a cable and whether the exact system supports Ethernet backhaul. | I want to be sure the cellar node can stay connected to the router, using an Ethernet cable if needed. Around 29% of consumers prioritise this connection. |
| Size of the solution | Compare one wired access point with the number of Wi-Fi nodes included in a complete system. | I want a solution for one cellar room without buying more equipment than I need. Around 21% of consumers prioritise keeping their purchase small. |
| Connection to your router | Check how the exact system connects, how it’s managed and which ports need to be available. | I want to keep using my existing modem or router and know in advance how the new equipment will connect to it. Around 14% of consumers prioritise keeping their existing router. |
A wireless mesh node needs its own connection to the network. If the signal is already weak where you place it, the connection between nodes may not be good enough.
Try an intermediate spot where the signal is still usable, or find out whether you can run an Ethernet cable to the cellar.
A coverage claim isn’t a measurement of the signal through your floor, and it doesn’t tell you exactly what reception you’ll get in your home.
Check the connection at possible locations and see whether Ethernet backhaul could be a suitable option.
A two-node system isn’t the same configuration as a similar system with three nodes. The number of nodes included may therefore differ from what you have in mind.
Check the full model name and what’s included in the system before comparing different versions.
The Deco X50 is a Wi-Fi 6 mesh system available in sets with different numbers of nodes.
The FRITZ!Mesh Set 1700 is an expandable system that, according to FRITZ!, can connect to an existing router or modem.
The ZenWiFi XD5 is a Wi-Fi 6 mesh system to consider if you’re weighing up a wireless or wired connection between Wi-Fi nodes.
These product picks include a wired access point and mesh models for wireless extension or use with Ethernet backhaul. Check which connection option is possible in your home.
No image available
An option to consider if you want to provide Wi-Fi in the cellar using a wired access point.
Before buying, check that your setup has compatible PoE+ equipment to power it.
No image available
A multi-node mesh option to consider if you have a cable route to the cellar. TP-Link lists optional Ethernet backhaul for the Deco X50.
Check that the connections on the version you choose are compatible with the cabling in your home.
No image available
A mesh router to consider if you’re thinking about extending your Wi-Fi wirelessly to the cellar.
Beforehand, test whether the router and possible intermediate spots along the route to the cellar get a usable signal.
No image available
A two-node mesh system to consider if you can use PoE for the installation.
Check that the necessary PoE equipment and connections are compatible with your network.
No image available
A mesh option to consider if you’re thinking about using several Wi-Fi nodes along the route to the cellar.
Check that the number of nodes and connection options on the system you choose suit your home’s layout and cabling.
Place it where it can still get a usable connection to the other Wi-Fi node. The Consumers’ Association recommends keeping obstacles between nodes to a minimum. Then check the connection in the cellar too.
Not necessarily: according to FRITZ!, the Mesh Set 1700 can connect to an existing router or modem. Before buying, check how the specific system connects to your equipment.
Use a strong password and keep the software on your router and Wi-Fi devices up to date. The Consumers’ Association recommends WPA3 or at least WPA2-AES. Check which settings and updates the system you choose offers.
According to the Dutch Authority for Digital Infrastructure, you don’t need a licence, notification or registration to use Wi-Fi within the licence-exempt conditions. However, the equipment must carry the correct CE marking. A mention on a product page doesn’t prove that the device supplied has this marking.
For a consumer purchase in the Netherlands, the seller is responsible for providing an appropriate solution if a product breaks sooner than you could reasonably expect during normal use. This is separate from any additional seller or manufacturer’s warranty. ACM ConsuWijzer explains your statutory guarantee rights.