Who is this relevant for?

Families with a Wi-Fi dead spot in the cellar

If you want to watch family videos downstairs, you’ll need to decide whether you can run a cable to the cellar or whether a wireless access point could get a signal from a suitable spot. The Consumers’ Association and the Wi-Fi Alliance note that placement and building materials can affect Wi-Fi coverage.

Families with a local video library

For videos stored on a computer or NAS, Wi-Fi coverage is only part of the picture. You’ll also need to check whether the storage device and playback devices can find each other on the local network.

Families who want to keep their provider’s router

An additional Wi-Fi access point may be an option if you want to keep your existing broadband connection and router. Check which features are available in the network mode you choose.

What should you consider when choosing?

First check whether you can run a cable to the cellar, then work out where the storage device and playback devices are connected to the network.

What to consider What should you look for? Who is this important for?
Wi-Fi in the cellar Check whether you can run a cable and use a wired connection. If you choose wireless, find a spot where an access point can still connect to the existing network. If you want to watch videos downstairs, the first priority is getting a usable connection into the cellar. Around 36% of consumers prioritise cellar coverage.
Playing local videos Find out whether the videos are stored on a computer or NAS, then check the network mode, connections and whether the storage device and player can reach each other. If you store videos locally, you’ll want your television or phone to be able to find the video source. Around 29% of consumers give access to their local video library top priority.
Keeping your existing router Check whether the model you choose supports access point mode, which features are available in that mode and which device assigns network addresses. If you want to keep your provider’s router, it matters whether an additional Wi-Fi access point will work with your existing network. Around 21% of consumers prioritise keeping their current connection.
File access Check for updates, guest network settings and access permissions. Make sure devices sharing videos don’t inadvertently block each other. If you don’t want to share family files with guests, you’ll also want to make sure your own playback devices aren’t locked out. Around 14% of consumers make file privacy their top priority.

Common pitfalls

  • Assuming a higher advertised Wi-Fi speed means better cellar coverage

    A speed specification on its own doesn’t tell you whether the signal will pass through the floor and walls into your cellar.

    First, work out where the existing signal drops out. Then compare a wired connection with a wireless access point in a spot where the signal is still usable.

  • Putting a repeater where there’s no source signal

    A wireless Wi-Fi access point needs a connection to the existing network itself. Without one, it can’t provide Wi-Fi to the cellar in this way.

    Before you buy, find a spot where the existing Wi-Fi still works. If there’s nowhere suitable, compare a wired access point instead.

  • Assuming every version with the same model name is identical

    Hardware versions and connections can differ between versions. The Consumers’ Association states that its test of the Deco X50-PoE 3-pack covered EU Ver 1.0; the manufacturer also describes a V2 version.

    Before buying, compare the full model name, pack size, hardware version and connections of the version on offer.

  • Confusing guest access with access to your video library

    Settings that restrict access can also stop devices that need to play videos together from finding each other.

    After installation, check separately what your family’s devices and your guests can access.

Brands to compare

TP-Link

The Deco X50 is a Wi-Fi 6 mesh system with optional Ethernet backhaul. According to TP-Link, the Deco X50-PoE V2 adds PoE and two 2.5 Gbps ports per unit.

  • A wired connection between Deco units is worth considering if you can run a cable.
  • The Consumers’ Association tested the EU Ver 1.0 of the X50-PoE 3-pack. That test result doesn’t necessarily apply to the V2.

FRITZ!

The FRITZ!Repeater 1200 AX is a repeater for a problem spot and has a Gigabit LAN connection. The manufacturer also describes connecting it to a router by cable.

  • A wired connection is an option to compare with wireless use.
  • It’s a repeater, not a replacement for an internet modem. For wireless use, it needs to be placed somewhere with a usable connection to the router.

ASUS

The ZenWiFi AX (XT8) is a tri-band mesh router. ASUS describes a dedicated band for the wireless connection between mesh points.

  • Depending on the setup and firmware, the manufacturer describes both wireless and wired backhaul for AiMesh.
  • A dedicated band doesn’t guarantee coverage through a particular cellar floor.

NETGEAR

According to NETGEAR, the Orbi RBK753 consists of one router and two satellites. It’s a set worth comparing if you need coverage in several areas.

  • NETGEAR documents both wireless and wired backhaul.
  • A wired satellite needs a cable and a suitable connection; the product specification doesn’t guarantee performance in your cellar.

Products on Joybuy

This selection includes mesh systems, a standalone repeater and a main router for anyone looking to extend or set up Wi-Fi around their home.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

A mesh system worth comparing if you want to extend Wi-Fi to several areas of your home.

The set name specifies a 2-pack. Wired backhaul requires an Ethernet cable between the units.

Joybuy
ASUS ZenWiFi BT8 2-Pack tri-band Wi-Fi 7

ASUS ZenWiFi BT8 2-Pack tri-band Wi-Fi 7

A mesh system worth comparing if you want to use Wi-Fi in several areas of your home.

The product name specifies tri-band (2,4 GHz, 5 GHz and 6 GHz), Wi-Fi 7 and a 2-pack.

Joybuy
TP-Link TL-WA850RE 300 Mbps Universal

TP-Link TL-WA850RE 300 Mbps Universal

A standalone repeater worth comparing if you mainly need Wi-Fi in one spot and there’s a suitable location nearby with an existing signal.

The product name specifies 300 Mbps. A wireless repeater needs a usable connection to the existing network where it’s placed.

Joybuy
TP-Link Deco M4 3-Pack dual-band Wi-Fi 5

TP-Link Deco M4 3-Pack dual-band Wi-Fi 5

A mesh system worth comparing if you want to extend Wi-Fi across several rooms.

The product name specifies three units, dual-band (2,4 GHz and 5 GHz) and Wi-Fi 5.

Joybuy
ASUS RT-AX52 AX1800 AiMesh dual-band router

ASUS RT-AX52 AX1800 AiMesh dual-band router

A main router worth comparing if your current router is the source of the problem and moving or reconnecting it could help.

The product name specifies dual-band (2,4 GHz and 5 GHz), AiMesh and Gigabit Ethernet. Extending an AiMesh network requires another AiMesh-compatible router.

Joybuy

Frequently asked questions

Do I need a faster internet connection to watch family videos stored on a computer or NAS?

Not necessarily. First, check whether the videos are played locally or through a service outside your home. For local access, the main considerations are the connection between the storage device and playback device, and network access. Sharing videos outside your home may require additional settings in the service you use.

Can I use a Deco behind my provider’s router without creating a second subnet?

TP-Link recommends using access point mode for this, which allows your existing router to continue assigning addresses. Check the model and firmware version: according to TP-Link, some parental controls and router features aren’t available in this mode.

How can I keep the connection secure and restrict access to family files?

Keep your router and Wi-Fi access points up to date, and check who can access the network and video source. After installation, test in the cellar that the intended playback devices can find the videos without inadvertently giving guests access.

What if a router I’ve bought breaks too soon?

In the Netherlands, statutory rights apply alongside any manufacturer’s guarantee. If a product breaks during normal use sooner than you could reasonably expect, the seller must offer an appropriate solution, according to ACM ConsuWijzer. There isn’t a fixed statutory guarantee period of exactly two years for every product.

Do I need a licence for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used without a licence on designated frequencies, with no notification or registration required. This doesn’t exempt suppliers from the applicable requirements for radio equipment. When buying a version intended for the Dutch market, check for the CE marking.