Who are these options for?

Transferring tapes in a shared workspace

You want to listen during the transfer without making your colleagues listen too. Look for an easy way to switch to headphones; PreSonus lists a front-mounted headphone output on the Eris 3.5 2nd Gen.

Transferring tapes with an existing cassette deck

You want to connect monitors to your deck or audio interface. First, make a note of the outputs, inputs and cables you already have; models vary, for example, in their RCA, TRS and XLR connections.

Listening with limited desk space

You’re looking for a compact stereo pair that will fit around your listening position. Consider not only the cabinet dimensions, but also whether both speakers can be positioned usefully and angled towards where you sit.

What should you look for when choosing?

First, work out whether you can play audio aloud in your shared workspace and whether there’s room for a practical stereo setup. Then check the signal path from your deck or interface.

Compact analogue stereo pair

Choose this if: your source has a compatible analogue stereo output and you can sometimes listen through speakers.

Bear in mind: playing audio aloud could disturb your colleagues. Also check whether plugging in headphones mutes the speakers.

Computer playback with an analogue connection

Choose this if: you want to play audio from a computer and can also connect the analogue input to your existing equipment. ADAM Audio lists USB-C and two balanced TRS inputs for the D3V.

Bear in mind: USB-C is a playback input for the monitors, not a recording input for a cassette deck.

Separate XLR monitors

Choose this if: you have suitable outputs and volume control, and can connect two separate monitors.

Bear in mind: Genelec lists one 8010A monitor per box, so you’ll need two for stereo, along with a compatible connection setup.

Headphone monitoring

Choose this if: speakers would disturb your colleagues, or there isn’t enough room for a practical left-and-right setup.

Bear in mind: check both cassette playback and the recorded file; headphones don’t replace these checks.

What to consider What should you check? Who is this important for?
Listening at a shared desk Check the workspace rules, where the headphone output is and whether connecting headphones mutes the speakers. PreSonus lists a front-mounted output on the Eris 3.5 2nd Gen, and says that connecting headphones mutes the speakers. If I want to listen privately while working without disturbing my colleagues, I care about how easy it is to switch over. Around 33% of consumers put this need first.
Connecting to your existing setup Make a note of your deck or interface outputs, monitor inputs, stereo channels, volume controls and included cables. IK Multimedia lists RCA and stereo 3.5mm inputs for the iLoud Micro Monitor; Genelec lists one XLR input per 8010A. If I want to use my existing deck or interface, I want to know in advance which wired connection and cables will work. Around 27% of consumers prioritise connection compatibility.
Space for a stereo setup Measure up to see whether two speakers, any stands and the cables will fit, and whether you can angle them towards your listening position. Genelec recommends a stereo triangle with a 60° angle between the monitors. When my desk is crowded, I want to be able to position two monitors without compromising my listening position. Around 20% of consumers put available desk space first.
Assessing the transfer Assess playback at your listening position and check the recorded file separately. Only compare frequency ranges when they’re measured on the same basis and under the same conditions; a stated figure isn’t a measurement of how they’ll sound on your desk. If I want to check what was actually transferred, I don’t want to rely on a speaker specification alone. Around 20% of consumers prioritise this assessment.

Common buying mistakes

  • Assuming a single monitor is a stereo pair

    Genelec lists one 8010A monitor per box, so one unit isn’t the same as a stereo pair.

    Check how many speakers are included in the exact listing, and find out which cables you’ll need to connect both.

  • Assuming USB-C or Bluetooth is the cassette deck’s recording connection

    A monitor connection for computer or wireless playback doesn’t mean the monitor can record an analogue signal from a cassette deck.

    Before buying, map out the route from the deck to the recording device, and from the recording device to the monitors.

  • Assuming a small cabinet guarantees a good fit

    Reflections and an uneven setup affect what you hear at your listening position; a compact size won’t automatically solve these issues.

    Measure the space for both monitors and check whether you can angle them towards your listening position. If not, consider a suitable private listening setup first.

  • Treating the Mackie CR3-X and CR3.5 (Gen 3) as the same model

    Home DJ Studio included the CR3-X in a ranking dated 6 June 2026. Mackie uses the model name CR3.5 (Gen 3) for a different generation; the names alone don’t show that they’re identical products.

    Compare the full model name, generation, connections and box contents of the listing you’re considering.

Brands to compare

PreSonus

The Eris 3.5 2nd Gen is an active stereo pair with RCA, TRS and stereo 3.5mm inputs.

  • PreSonus lists a front-mounted headphone output and controls.
  • The stated frequency response starts at 80 Hz; that figure alone doesn’t tell you how they’ll sound on your desk.

IK Multimedia

The iLoud Micro Monitor is a compact active stereo pair with wired RCA and stereo 3.5mm inputs.

  • IK Multimedia lists two speakers and a connection cable.
  • Check that the included connection is compatible with your source and planned setup.

ADAM Audio

The D3V is an active desktop pair with USB-C for computer playback and analogue TRS connections.

  • ADAM Audio lists removable stands and placement controls.
  • USB-C is a playback input; check separately how to connect your cassette deck to the analogue inputs.

Genelec

The 8010A is a compact active monitor with one analogue XLR input per speaker.

  • The stated dimensions can help you plan where to position it on a desk.
  • Genelec lists one monitor per box; you’ll need two for stereo, along with a compatible connection setup.

Mackie

The CR3.5 in the current CR Series (Gen 3) has TRS, RCA and 3.5mm inputs.

  • Mackie lists a headphone output and a switch for desktop or bookshelf placement.
  • The tone control changes the sound, so check its setting when assessing a transfer. Don’t assume this model is the same as the CR3-X.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I connect a cassette deck directly to studio monitors?

It depends on your deck’s output and the monitors’ input and volume controls. Connections vary by model: the PreSonus Eris 3.5 2nd Gen and IK Multimedia iLoud Micro Monitor have RCA inputs, while each Genelec 8010A speaker has one XLR input. Check the full signal path and the cables you’ll need; USB-C on the ADAM D3V isn’t a cassette recording feature.

How should I position two monitors on a desk?

Angle the left and right speakers towards your listening position and aim for a symmetrical stereo triangle. Genelec recommends a 60° angle between monitors for stereo monitoring and notes that nearby surfaces affect the sound. Treat this as placement advice; on a shared desk, your setup will depend on the space available.

Are good speakers enough to guarantee a good cassette transfer?

No. According to the International Association of Sound and Audiovisual Archives guidelines, playback of the original cassette is also part of the transfer process. Monitors are just one part of the checking process: you should also check what was actually captured in the digital file.

Should I budget for one monitor or two, and what can I do if one is faulty?

Check what’s included in the box: Genelec lists one 8010A monitor per box, while PreSonus sells the Eris 3.5 2nd Gen as a pair. For faulty goods, the Government of the Netherlands says the retailer is your point of contact for a solution; your statutory guarantee is separate from any manufacturer’s warranty.