Who is this guide for?

Cassette owners with few power sockets

You want to listen to a stereo recording using a deck and computer without automatically needing an extra mains adapter for the interface. The USB power you need depends on the computer and interface; Focusrite and Arturia explain the requirements for their models.

Listeners who want to spot stereo problems

You want to monitor the left and right channels separately during the transfer and keep an eye on the recording level. Focusrite and Arturia describe direct monitoring options; the Audacity Manual recommends checking the recording level on the meter while setting up.

Anyone looking for a simple RCA-to-USB connection

Your deck has stereo RCA outputs and you want a connection that suits them. Behringer says the UFO202 has a stereo line input for devices including cassette decks; check the monitoring and power options for each model too.

What should you look for when buying?

A stereo transfer needs a connection for both the left and right channels. The Audacity Manual explains how to record two stereo channels; connections and monitoring options vary between models from Behringer, Focusrite, Arturia and PreSonus.

What to consider What to look for Who is this most important for?
Stereo connection Check that the deck and interface have two suitable line inputs and that the cables fit. I want the left and right channels from my cassette to reach the computer as two separate channels; around 29% of consumers consider this stereo connection their main priority.
Power Check the USB power requirements for the exact model and your computer’s port or hub. There’s barely room for extra plugs in my setup; around 29% of consumers want to avoid needing an extra power socket for the interface.
Stereo monitoring Check the headphone output and whether direct monitoring is set to stereo. I want to monitor both cassette channels separately during the transfer; around 24% of consumers prioritise stereo monitoring.
Recording checks Make a test recording and check the level during loud passages, as well as whether both channels are being recorded. I want to check that the signal isn’t clipping before starting a long transfer; around 18% of consumers make recording checks their top priority.

Common buying mistakes

  • Assuming USB always means you won’t need an extra adapter

    Focusrite says the Scarlett 2i2 4th Gen can usually be powered by a computer, but has a separate 5V socket if the computer doesn’t supply the specified 1.5 A over USB-C. Arturia warns that some unpowered hubs may not provide enough power.

    Check the power requirements for your chosen model and the computer or hub you’re using. Remember that the cassette deck has its own power supply too.

    If USB power is insufficient, you may need a separate power supply or a different USB port.

  • Connecting two cables but monitoring in mono

    A direct mono mode can combine the two channels when you listen, so you won’t hear them separately.

    Check both the stereo recording settings and the monitoring mode on your chosen model.

  • Using the wrong input for your deck

    The UFO202 has a switchable line/phono input. For a cassette deck’s line output, the input should be set to line; a computer also won’t necessarily have a suitable stereo line input.

    Before buying, compare your deck’s output with the interface input and select the right setting.

    If your deck has RCA outputs, you may need suitable cables or adaptors.

  • Checking the recording level only after the whole cassette has played

    Arturia says distortion caused by clipping cannot be fully corrected. The Audacity Manual recommends monitoring the level on the meter while recording.

    First, make a short test recording of a loud passage and check both channels.

    Redoing a failed transfer means waiting for the cassette to play through again.

Brands to consider

Behringer

Behringer describes the UFO202 as an interface with a switchable line/phono input and stereo RCA connections. The manufacturer says the UCA202 has two analogue inputs and a stereo headphone output.

  • The UFO202 is specifically listed as having a stereo line input for devices including cassette decks.
  • Check the power, input level and headphone monitoring options for each model.

Focusrite

Focusrite says the Scarlett 2i2 4th Gen has two jack line inputs, a headphone output and direct monitoring with stereo and mono modes.

  • The separate stereo monitoring mode could suit anyone who wants to monitor both channels while recording.
  • A deck with RCA outputs will need suitable cables. Focusrite lists an optional 5V socket for use when a computer doesn’t supply the specified 1.5 A over USB-C.

Arturia

Arturia describes the MiniFuse 2 as a two-channel interface with a headphone output, monitor mix control and a switch for direct mono monitoring.

  • The monitoring controls let you choose direct monitoring of the inputs.
  • RCA outputs need suitable cables; Arturia warns that some unpowered USB hubs may not provide enough power. Monitoring directly and through software at the same time can cause an echo.

PreSonus

PreSonus describes the Studio 24c as a two-channel interface with microphone, instrument and line inputs, a headphone output, level meters and a mix control.

  • PreSonus says the model is bus-powered and includes meters for checking the signal.
  • The listed connections are jack inputs rather than stereo RCA inputs; check the cables and stereo monitoring options you need for your deck.

Joybuy products

Related products will be available soon.

Frequently asked questions

How do I connect a deck with two RCA outputs?

Connect the left and right outputs to a stereo RCA line input, or use suitable cables to connect them to two jack line inputs. Select the interface as the recording source and set two recording channels in your recording software; if your interface has a switchable phono/line input, set it to line for a line output.

Can I listen directly and through the recording software at the same time?

In some setups, this can result in doubled audio or an echo. To monitor the input, it’s best to use just one listening route. If you’re recording a stereo cassette, check that direct monitoring is set to stereo.

What should I do before and after recording?

Check the playback head and clean it if needed, following your deck’s instructions. Make a test recording and monitor the levels during loud passages. The Audacity Manual recommends saving a separate WAV or AIFF copy after the transfer, before you start editing.

Who can help if an interface bought online in the Netherlands is faulty?

According to the Dutch government, the seller is responsible for putting things right if a product is faulty. The Netherlands has no fixed statutory guarantee period that applies to all products; a manufacturer’s guarantee does not replace your statutory right to a product that works as it should. For online purchases from a business, you’ll generally also have a 14-day cooling-off period.

Can I digitise music from a cassette in the Netherlands?

The Dutch government says you may make a private copy of copyright-protected music for your own use, but you must not distribute it or make it available to the public. This does not automatically answer questions about other uses, such as publication or commercial transfers.