Who is this choice relevant to?

Drone filmmaker using microSD

You want to copy footage directly from your drone’s microSD card to a laptop. Look for a suitable microSD slot and a connection that works with your laptop.

Creator using two card formats

You work with standard SD cards as well as drone microSD cards, and want to use one reader for both. Check that the version you choose has slots for both card formats.

Mobile creator in a shared workspace

You may want to copy files to a tablet or another mobile device. Check that the device can access external storage, and take care when handling shared files.

What should you look for?

First, work out which card and connection you use. Then consider whether UHS-II transfer, support for a second card format or a careful copying workflow matters most to you.

What to consider What should you check? Who is this important for?
Card format and connection Check whether the reader accepts microSD or SD cards, and whether its USB-A or USB-C connection suits your device. For mobile use, also check that the device can access external storage. I want to connect my microSD card directly to the device I’m copying to; around 33% of consumers prioritise card and port compatibility.
Transferring large files Check the interface supported by both the card and the reader. A stated maximum is not a guaranteed copying time for your particular setup. When working with large drone files, I want to know whether my card and reader support the same interface; around 27% of consumers prioritise the transfer interface.
SD and microSD in one reader Check that the exact version has separate slots for both card formats. An extra SD slot is less relevant if you only use microSD. I use standard SD cards as well as drone microSD cards, and don’t want to keep switching readers; around 20% of consumers choose mainly based on support for both formats.
Shared copying workflow Check that the target device can read the card, that the files have been copied and how to safely disconnect the storage. Manage access and storage in a way that suits the footage. In a shared workspace, I want to check files after copying and manage access carefully; around 20% of consumers consider the copying workflow their main priority.

Common buying mistakes

  • Assuming a UHS-II maximum means guaranteed copying speeds

    The SD Association describes bus speeds; that’s not the same as the speed of a complete copy. Lexar says results depend on the card and system configuration.

    Check the interface supported by both the card and reader, and don’t treat a manufacturer’s maximum as a prediction of copying time for your workflow.

  • Assuming USB-C will automatically work with a tablet

    Having the right connector doesn’t guarantee that the device can access external storage. ACT lists OTG support as a requirement for using the AC7056 with a mobile device.

    Before buying, check whether your device supports external storage and whether you need a compatible connector or adapter.

    For mobile use, you may need a suitable connector or adapter.

  • Assuming the copy has worked before checking the files

    Disconnecting too soon can result in data loss. Drone footage may also show identifiable people, which affects how you handle and share the files.

    Check the files on the destination device and safely eject external storage. If people are identifiable, organisations must comply with the GDPR and protect personal data properly, according to the Dutch Data Protection Authority.

Card reader brands to consider

SanDisk

The QuickFlow microSD card reader is a USB-C option for copying files directly from a microSD card.

  • SanDisk says this version supports UHS-I and UHS-II microSD cards.
  • The version described is a microSD reader, not a reader with an extra slot for standard SD cards.

Kingston

The MobileLite Plus microSD Reader is suited to computers with USB-A and microSD cards.

  • For the microSD version, Kingston specifies UHS-II with backwards compatibility for UHS-I.
  • Check the difference between the microSD and SD versions, and make sure the USB-A plug suits your device.

Lexar

The Professional USB-C Dual-Slot Reader is designed for use with both SD and microSD cards.

  • Lexar specifies UHS-II and backwards compatibility with UHS-I.
  • The stated speed of up to 312 MB/s is a manufacturer’s maximum; Lexar says results depend on the system configuration and card speed.

ACT

According to ACT, the AC7056 combines SD, microSD, USB-C and UHS-II.

  • ACT lists support for OTG.
  • ACT says mobile use requires an OTG-compatible device; the stated speeds are manufacturer figures for this model.

Anker

According to Anker’s product specifications, the USB-C 2-in-1 Card Reader has separate SD and microSD slots.

  • Anker says the model supports two card formats in one reader.
  • Anker specifies UHS-I for both slots, so this reader won’t make use of a card’s UHS-II bus mode.

Joybuy product picks

This selection includes USB-C setups and card readers for workflows using SD and microSD cards. For each version, check that the card slots and connection suit your card and the device you’re copying to.

Acer ODK6V0 7-in-1 USB-C Hub

Acer ODK6V0 7-in-1 USB-C Hub

This may suit you if you’re looking for a USB-C hub with an SD and TF card reader. The product name also mentions HDMI 4K@30Hz, 100W PD, 3× USB 3.0 5Gbps and an aluminium casing.

View at Joybuy
Kingston Technology USB3.2 Gen1 Workflow Dual-Slot SDHC/SDXC UHS-II Card Reader

Kingston Technology USB3.2 Gen1 Workflow Dual-Slot SDHC/SDXC UHS-II Card Reader

This may suit you if you’re looking for a card reader with two slots and UHS-II. The product name specifies SDHC/SDXC; check that the exact card formats and connection suit your workflow.

View at Joybuy
Verbatim CMH-13 USB Type-C 10000 Mbit/s Silver

Verbatim CMH-13 USB Type-C 10000 Mbit/s Silver

Consider this USB-C version if its connection suits your device. Check that the exact card slots support the SD and microSD cards you want to use.

View at Joybuy

Frequently asked questions

Can I transfer drone footage without a card reader?

Sometimes. For compatible models, DJI describes options including a USB connection to a computer and QuickTransfer to a phone. The method that works depends on the drone model and files, so you don’t always need a card reader.

Will any USB-C card reader automatically work with my iPad?

No. Apple describes accessing SD cards through the Files app using a compatible connector or adapter. Check your iPad model and connection, and make sure external storage is recognised.

When is it safe to disconnect the card reader?

Wait until copying is complete and check the files on the destination device. Microsoft recommends safely removing external storage in Windows before disconnecting it, to prevent data loss.

Does the GDPR apply to drone footage I copy at work?

If people are identifiable or can be recognised in the footage, its processing must comply with the GDPR, according to the Dutch Data Protection Authority, even if this wasn’t the intention when filming. Organisations must protect personal data properly; a card reader doesn’t provide that protection.

Do I always have 14 days to change my mind when buying online in the Netherlands?

Not always. According to the Dutch Government, a 14-day cooling-off period applies in many cases when buying at a distance. Check the information about the cooling-off period for your specific purchase.