Who should consider this card reader advice?

Photographers using several card types

Use SD cards as well as CFexpress, and check before buying whether your card is Type A or Type B. Sony Netherlands and Lexar describe readers for different CFexpress types.

Photographers with lots of SD cards

Regularly import several SD cards into a catalogue, so pay attention to the number of slots and the supported card interface. Kingston Technology describes a Workflow SD reader with two UHS-II SD slots.

Photographers who travel light

Take a card reader with you and choose one that matches your card type and laptop port. The SD Association explains the differences between card interfaces; you should also check the reader’s connector.

What should you look for when choosing?

Start with the exact card type, then check your computer’s port and decide how many slots you need for your import workflow.

What to consider What should you check? Who is this for?
Supported card type Compare the label on your card with the card types explicitly supported by the reader, including CFexpress Type A or Type B. If I use SD as well as CFexpress, I want a reader that supports the exact card type used by my camera; for around 33% of consumers, card compatibility is the top buying priority.
Import speed Compare the UHS interface of your SD card and reader, along with your computer’s USB capabilities; a maximum speed isn’t the same as a measured import speed. When I regularly import large batches of photos, I want the card, reader and computer interfaces to work well together; around 27% of consumers prioritise import speed.
Number of slots Check how many slots there are and which card type each one accepts. After a day using several cards, I want to be able to read them all in one session; for around 20% of consumers, handling multiple cards is the main buying priority.
Connection and portability Check that the plug and any supplied cables are compatible with the ports on the computer you use for importing. If I import photos at different workstations, I want a reader that connects to the available port and is easy to carry; around 20% of consumers prioritise this combination.

Common buying mistakes

  • Assuming all CFexpress readers support the same type

    The combination readers described here are designed for different CFexpress types. A Type A card won’t necessarily work with a reader that supports Type B.

    Compare the full type label on your memory card with the types supported by the reader.

Brands to compare

These brands are useful points of comparison for different card types and workflows. The features listed apply to the models described, not automatically to every product from a brand.

Kingston

The Workflow WFS-SD is for workflows using two SD cards; the MobileLite Plus is a compact SD option.

  • Kingston Technology specifies two UHS-II SD slots and UHS-I support for the WFS-SD.
  • The specifications listed are for SD cards; check separately whether a model supports the CFexpress type used by your card.

Lexar

Offers readers for different card combinations, including a Professional CFexpress Type B/SD reader.

  • Lexar specifies separate Type B and SD slots for the combination reader described, as well as supplied USB-C and USB-A cables.
  • Any quoted transfer speed is a manufacturer claim for that model, not an independent measurement or a feature of all Lexar readers.

Sony

The MRW-G2 is designed for use with CFexpress Type A as well as SD.

  • Sony Netherlands specifies support for CFexpress Type A and SD UHS-II/UHS-I.
  • The quoted 10 Gbps USB mode isn’t a guaranteed copy speed; the MRW-G2 isn’t specified for CFexpress Type B.

SanDisk

The Extreme PRO SD UHS-II USB-C Reader, model SDDR-409-C46, is designed for a compact SD workflow.

  • SanDisk specifies USB-C and support for UHS-II, UHS-I and standard SD cards; the product specifications say an adapter is needed for microSD.
  • Check the card types supported by the exact model; no CFexpress slot is specified for this SD reader.

Joybuy card reader

This selection of Joybuy card readers is aimed at importing two SD cards per session.

Kingston Technology Workflow Dual-Slot SDHC/SDXC UHS-II card reader

Kingston Technology USB3.2 Gen1 Workflow Dual-Slot SDHC/SDXC UHS-II card reader

Suitable for a workflow where you want to read two SD cards per import session.

The product name specifies SDHC/SDXC, UHS-II and two slots; Kingston Technology also describes support for UHS-I alongside UHS-II.

The product description lists a supplied USB-C cable and compatibility with Mac and Windows.

The Workflow Station dock is sold separately and is required to connect this reader to other readers on the dock.

View at Joybuy

Frequently asked questions

Can I read a CFexpress card with a standard SD reader?

No. A standard SD reader isn’t designed for CFexpress. Choose a reader that supports the exact CFexpress type used by your card; Type A and Type B aren’t interchangeable.

How can I import photos without removing the card too soon?

In your photo library’s import feature, select the card as the source and check the destination folder. Adobe describes an option in Lightroom Classic to copy photos from a camera card and eject it after importing. Then check that the photos you wanted are in the destination before reusing the card.

What if a card reader bought online doesn’t fit or stops working too soon?

For online consumer purchases in the Netherlands, you generally have a 14-day cooling-off period from delivery, subject to applicable exceptions. You’re also protected by the statutory guarantee. According to the ACM’s ConsuWijzer service, the seller must resolve a product problem if an item breaks sooner than could reasonably be expected under normal use; a manufacturer’s warranty doesn’t replace this right.

Do privacy rules apply when I import nature photographs?

That depends on what’s in the photos and how you use them, not on the card reader. If people are recognisable in the images, the photos may contain personal data, so check which rules apply to your use of them.