Creator with one HDMI camera
Wants to use a camera directly in recording software, without menu overlays, so checks the HDMI output, cable and computer connection first. These points are also covered in information from Elgato and OBS Project.
Start with your camera’s output signal and your computer’s connection: both need to work with the capture card and your recording software. Then choose a card based on the resolution and frame rate you want to record at. HDMI pass-through, a separate audio input or SDI are mainly relevant if your setup uses those connections.
Wants to use a camera directly in recording software, without menu overlays, so checks the HDMI output, cable and computer connection first. These points are also covered in information from Elgato and OBS Project.
Wants to view the footage on a separate screen or uses a separate audio signal, so looks for pass-through and audio connections. AVerMedia and StarTech.com describe models with HDMI pass-through.
May need SDI or adjustable signal processing, for example, and also checks which computer interface and software are required. Magewell and Blackmagic Design describe products for these types of connection and workflow requirements.
Choose this option: if you want to use one camera directly in recording software and don’t need a separate screen connected via the capture card.
Bear in mind: check the camera output, the exact product revision and the computer requirements. “4K” alone doesn’t tell you what you can record.
Choose this option: if you also want to view the camera feed on a separate HDMI screen while recording.
Bear in mind: the AVerMedia GC311 records at up to 1080p60 and, according to AVerMedia, doesn’t support 4K or HDR. The StarTech.com UVCHDCAP also has a 3.5mm stereo audio input.
Choose this option: if you need SDI or adjustable signal processing and use the corresponding computer interface.
Bear in mind: the Blackmagic UltraStudio Express Recorder 3G requires a compatible USB4 or Thunderbolt 4 computer. The Magewell USB Capture HDMI Gen 2 may be limited in frame rate by USB bandwidth and internal processing.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Connection and compatibility | Check the camera output, cable type, clean HDMI output and the USB or Thunderbolt connection required for the exact model. | If I want to make sure my camera, cable, capture card and computer will work together, I check the connections first; around 33% of consumers rank compatibility as their top buying priority. |
| Recording format | Compare the maximum recording resolution and frame rate for the exact model with the signal your camera actually outputs. | If the resolution and frame rate of the recorded file are my priority, I check the recording specifications, not just the input signal; around 27% of consumers prioritise the recording format. |
| Monitoring and audio | Check whether HDMI pass-through is available and, if needed, whether there’s a separate audio input. Test your audio and video selections, as well as synchronisation, in your software. | If I need a separate screen or a specific audio connection while recording, I look for those connections on the capture card; around 20% of consumers give monitoring or audio top priority. |
| Long recording sessions | Check your camera’s sleep mode, external power supply and HDMI overlays, and make a test recording beforehand. | For long sessions, I want the camera to keep outputting a signal without overlays or switching off automatically; around 20% of consumers prioritise uninterrupted camera use. |
Input signal, HDMI pass-through and recorded resolution are different specifications. With the Elgato Cam Link 4K, 2160p60 depends on a compatible camera and the latest product revision, according to Elgato.
Check the maximum recording specification for the exact variant and your camera’s output signal.
Menu overlays, automatic shut-off or insufficient power can disrupt your recording, even if the capture card is suitable.
Test the camera with an HDMI screen and check its settings and manual before choosing a capture card.
You may need a suitable cable or an external camera power supply.
USB-C describes the connector shape, but the computer interface required varies by model. Elgato specifies USB 3.x for the Cam Link 4K, while Blackmagic Design specifies USB4 or Thunderbolt 4 for the UltraStudio Express Recorder 3G.
Compare the interface requirement for the exact model with the port specifications on your computer.
The Cam Link 4K is designed to use one HDMI camera as a USB video source.
The Live Gamer MINI GC311 combines HDMI capture with HDMI pass-through.
The USB Capture HDMI Gen 2 is designed for one HDMI source with embedded audio and a USB 3.0 computer connection.
The UVCHDCAP is an HDMI capture card with pass-through and a separate stereo audio input.
The UltraStudio Express Recorder 3G is designed for workflows using HDMI or 3G-SDI and a compatible computer interface.
In OBS, add a ‘Video Capture Device’ source and select your capture card. If there’s no picture, check whether the device supports the selected resolution and frame rate.
No, check your camera too. Consult the manual to make sure the camera keeps outputting a signal without overlays, doesn’t switch off automatically and can be powered during recording.
For online consumer purchases, you’re often entitled to a 14-day cooling-off period, although there are exceptions. You’re also entitled to a product that’s fit for purpose: if there’s a fault, the seller—not the manufacturer—must provide a solution.
This depends in part on how you use the footage. The Dutch Data Protection Authority says the household exemption applies when footage stays private or is shared only with a very limited group. Check which privacy rules apply if you want to use footage more widely or for business purposes.