For individual small candles that fit inside the opening, a light tent is a handy choice if you want a repeatable tabletop setup with a backdrop. For larger candles, groups of candles or more control over the light and reflections, a separate softbox with a suitable lamp and white backdrop is a better fit. Check the internal dimensions, what’s included in the set and the power supply. Soft light won’t automatically make the backdrop evenly white, and it can make the outline of a white candle disappear.
Who is this lighting suitable for?
Maker with a small photo table
If you photograph individual candles for product listings, a foldable light tent with a white backdrop could be a good fit. Compare its internal dimensions with the candle and the space you want around the product. Adobe highlights the importance of controlled lighting and an uncluttered backdrop in product photography; NEEWER lists the LP40’s internal dimensions as 40 × 40 × 40 cm.
Maker of glossy jar candles
With glass or glossy finishes, you’ll want to be able to assess and reposition the visible areas of light. The position and shape of the light source can show up in reflections; Broncolor explains how a white reflector can fill in the shadow side of dark or shiny objects.
Maker working with different sizes
If you also photograph larger candles or groups, a freely arranged lighting setup can give you more room to position your products than a light tent. Adobe recommends a controlled setup, while Godox describes the SL60IID and SL60IIBi as continuous LED lights for a separately assembled lighting setup.
What should you look for when choosing?
Start with your largest candle and the space you have to work in. Then decide how much flexibility you need to position the light source and backdrop separately.
| What to consider |
What should you look for? |
Who should pay more attention to this? |
| White backdrop and clearly defined shape |
In a test shot, assess both how white the backdrop looks and how clearly the candle’s outline shows. A reflector can fill in the shadow side; make sure the extra light doesn’t make the edge disappear. |
If I photograph a light-coloured candle against white, I want to keep its shape visible without making the backdrop look dark. Around 36% of consumers prioritise control over the candle’s outline and the backdrop. |
| Reflections on glossy surfaces |
Take a test shot from your intended camera angle and check whether you can move the light source or diffuser. Diffusion softens light, but it doesn’t guarantee that visible reflections will disappear. |
With a glass jar, I want to be able to adjust distracting reflections without losing sight of the product’s gloss. Around 29% of consumers prioritise controlling reflections on jars. |
| Consistent colour rendering |
Compare the specifications for the exact lamp variant and keep the camera’s white balance consistent across a series of shots. NEEWER lists the LP40 at 5600 K; Godox gives the SL60IIBi an adjustable range of 2800–6500 K. |
For a series of product photos, I want the colours of the wax and labels to look consistent from one image to the next. Around 21% of consumers make colour consistency their top priority. |
| Size and complete set |
Measure your largest candle or group of products and compare it with the internal dimensions. NEEWER lists the LP40 at 40 × 40 × 40 cm; the SB-BW6090 has a Bowens mount and needs a compatible light source. For the PULUZ PU5041B, also check that the power supply meets the specified 5 V requirement. |
If I photograph products in different sizes, I want to know whether everything will fit and which extra components I’ll need. Around 14% of consumers prioritise size and a practical, complete setup. |
Common buying mistakes
-
Assuming a separate softbox is a complete lighting kit
A softbox such as the NEEWER SB-BW6090 shapes the light, but doesn’t produce it. Its Bowens mount needs to fit the lamp you choose.
Check what’s included in the package and make sure each component has a compatible connection before assembling your setup.
A modular setup may also need a lamp, a stand and a backdrop, which you’ll have to combine separately.
-
Looking only at a light tent’s external dimensions
A candle might fit inside the tent but leave too little room for the composition you want.
Measure your largest candle or group of products and compare it with the stated internal dimensions, not just the packed size.
-
Assuming soft light will automatically give you an evenly white photo
The candle, its shadow and the backdrop can all respond differently to the same light source. Flat lighting can make the candle’s outline less visible.
Take a test shot and assess the backdrop, the edge of the product and any reflections separately.
You may need extra time to adjust the backdrop and light position, then review the shot again.
Relevant brands and product ranges
NEEWER
The range includes both foldable light tents and separate light modifiers for different types of setup.
- According to NEEWER, the LP40 has built-in LED lighting, a white backdrop and internal dimensions of 40 × 40 × 40 cm.
- The SB-BW6090 is a separate softbox with a Bowens mount; you’ll need a compatible light source.
PULUZ
The PU5041B is a 40 cm foldable light tent for small products photographed on a table.
- PULUZ lists built-in dimmable LED lighting and an included diffuser.
- The manufacturer specifies a 5 V USB power supply and rules out a higher output voltage. Check that your chosen power supply is suitable.
Godox
The SL60IID and SL60IIBi are continuous LED lights for a modular lighting setup.
- Godox lists a Bowens mount for both variants; for the SL60IIBi, the manufacturer specifies an adjustable colour temperature range of 2800–6500 K.
- The lamp is one component of the setup. Check which softbox and mount are compatible with it.
SmallRig
The RA-D60 is a separate light modifier for a modular setup.
- SmallRig lists two diffusion cloths and a 45° grid as standard in the box.
- The RA-D60 isn’t a lamp or a complete candle photography kit. Check that its mount is compatible with your chosen light source.
Products on Joybuy
Related products coming soon.
Frequently asked questions
Is one softbox enough for a white backdrop?
Not on its own: the backdrop may be lit differently from the candle. In a test shot, assess both the backdrop and the visible outline. If needed, use a reflector to fill in the shadow side.
How should I light candles in a glossy jar?
Start with diffused light and move the light source while checking the reflection from your intended camera angle. A light tent or diffuser can soften harsh light, but the shape of the light source may still be visible.
Can I photograph a lit candle in the setup?
You’ll need to take extra care with fire safety: place the candle on a stable surface and keep paper, diffusion cloth and other flammable materials well away, as advised by the Netherlands Fire Service. For a standard product photo, an unlit candle is easier to work with. A flame is also much brighter than its surroundings.
What should I check before buying online?
Check whether the lamp, stand, backdrop and suitable power supply are included in the setup. For online purchases from a business, consumers generally have a 14-day cooling-off period under Dutch government rules. ACM ConsuWijzer also explains your statutory rights if a product doesn’t perform as you could reasonably expect when used normally.
Is CE marking compulsory for studio lighting in the Netherlands?
CE marking is compulsory for electrical products placed on the Dutch market, such as an LED lamp or a light tent with built-in lighting, according to the Netherlands Food and Consumer Product Safety Authority. This requirement doesn’t automatically apply to a passive fabric softbox on its own. CE marking isn’t an independent quality mark in itself.