Who is this guide for?

Makers documenting tile colours

You photograph several tiles for a portfolio or product overview and want to keep the colour and framing consistent between shots. A fixed set-up and careful attention to lighting and white balance can help.

Makers capturing glaze details

You want to show small differences in texture or finish. Compare the magnification and working distance of your chosen lens or close-up mode with the detail you want to photograph.

Photographers with limited set-up space

You share your shooting space with others and want a set-up you can assemble, move and recreate later. As well as the camera, consider the space needed for lighting and a tripod.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Colour and consistency Check whether you can set the white balance and position the camera at the same angle each time. Also bear in mind that daylight and workshop lights can change. When I photograph a series of tiles for a portfolio, I want to keep the colours and framing as consistent as possible. Around 33% of consumers prioritise colour consistency.
Reflections on glaze Take a test shot using your actual lighting and check whether you can move the camera, tile and light independently. Diffused light can help, but reducing reflections may also make the gloss less visible. With glossy tiles, I want to control bright reflections without making the finish unrecognisable. Around 27% of consumers see reflections as their main consideration.
Small details Compare the maximum magnification and working distance of the specific lens or close-up mode with the detail you want to show. Allow for the space your lighting needs in front of the lens. If I want to show small differences in glaze or texture, the detail needs to appear large enough in the frame while still leaving room for lighting. Around 20% of consumers prioritise magnifying details.
Set-up and storage Measure where the camera and lighting can go. Also consider how many separate pieces of equipment you need to carry and how you can recreate the same shooting angle later. When I share a workspace and have to pack away my set-up each time, I want to get started quickly and find the same angle again. Around 20% of consumers prioritise limited space and quick set-up.

Common buying mistakes

  • Buying a more expensive camera to eliminate bright reflections on glaze

    The Field Guide for Ceramic Artisans emphasises diffused, consistent light; RTINGS’ product photography guide also highlights the role of presentation and lighting. A different camera will not remove reflections on its own.

    First, adjust the position of the light and use a stable camera angle. Then consider whether you are missing a camera feature.

    Adjusting the lighting and taking test shots requires extra preparation time.

  • Assuming a kit zoom is a macro lens

    Magnification varies from one lens to another. Canon lists a maximum magnification of 0.25× for the RF-S 18-45mm in manual focus mode; Nikon lists 1:1 for the separate NIKKOR Z MC 50mm f/2.8 lens.

    Before choosing a camera body or kit, compare the magnification of the specific lens with the level of detail you want.

    A separate macro lens can mean extra cost and more time to set up.

  • Confusing a short focusing distance with enough room for lighting

    A lens that can focus close up does not automatically leave enough room for lighting. Nikon lists a distance of approximately 5 cm between the front of the lens and the subject at the closest focusing distance for the Z MC 50mm.

    Check both magnification and working distance with the lighting you plan to use on your workbench.

  • Assuming two years is the standard legal guarantee period

    The Dutch government states that there is no fixed statutory guarantee period in the Netherlands. An additional manufacturer’s or retailer’s guarantee is separate from your statutory rights.

    Read the terms and check what an additional guarantee gives you on top of your statutory rights.

    An additional guarantee may cost extra, so check what additional rights the terms actually provide.

Camera brands to consider

Canon

The EOS R50 with the RF-S 18-45mm kit lens is a mirrorless camera option for wide shots and a repeatable tabletop set-up.

  • Canon specifies a 24.2 MP APS-C sensor and an RF/RF-S mount for the EOS R50.
  • Canon lists a maximum magnification of 0.25× for the RF-S 18-45mm in manual focus mode. Check whether that is enough for the small details you want to capture.

Sony

The Alpha 6400 is a mirrorless camera option if you want to choose the body and lenses separately.

  • Sony specifies approximately 24.2 effective megapixels and RAW for the ILCE-6400. According to Sony, the separate SEL30M35 macro lens has a maximum magnification of 1.0×.
  • Sony lists a minimum focusing distance of 0.095 m for the SEL30M35. Check whether there is still room for lighting at that working distance.

Nikon

The Z50II with a 16-50mm VR kit lens is an option for wide shots; the separate NIKKOR Z MC 50mm f/2.8 lens offers a way to capture greater detail.

  • Nikon lists the 16-50mm lens as part of the kit and specifies 1:1 magnification for the separate Z MC 50mm lens.
  • The 1:1 specification applies to the separate macro lens, not the kit zoom included in the box.

OM SYSTEM

The Tough TG-7 is a compact camera with a fixed lens, for anyone who wants to take close-ups without changing lenses.

  • The manufacturer lists approximately 12 MP, RAW and a close-up capability of up to 1 cm.
  • Check whether the fixed lens can frame both the detail you want and a whole tile. The published support period for TG-7 firmware, OM Workspace and OI Share ended on 30 September 2026.

PENTAX

The WG-8 is a compact camera with a fixed lens and built-in ring light, worth considering for close-ups.

  • Ricoh Imaging Europe lists an approximately 20 MP sensor, 5× optical zoom and a built-in ring light for the WG-8.
  • A built-in ring light does not guarantee true-to-life glaze colours; assess a test shot under your working conditions.

Cameras at Joybuy

These Joybuy camera picks are worth considering for photographing tiles. Check each model to see whether its lens, controls and set-up suit the composition you want and the space you have to work in.

Komery W6 digital camera with 12× optical zoom

Komery W6 digital camera, 12× optical zoom

The stated zoom may be useful if you want to adjust the framing without moving the camera; try it with a tile to see whether you can get the composition you want.

The product name lists 12× optical zoom, 4K and 64 MP.

Joybuy
DJI Osmo Pocket 3 Creator Combo camera

DJI Osmo Pocket 3 Creator Combo

The product description mentions fast focusing for still photos; take a test shot to see how the camera works with your tile set-up.

The description lists a 1-inch CMOS sensor and a rotating 2-inch screen. The product name lists 4K/120fps video.

Joybuy
DJI Osmo Pocket 3 camera

DJI Osmo Pocket 3

The product description mentions fast focusing for still photos; take a test shot to check whether the framing suits your tile and workspace.

The description lists a 1-inch CMOS sensor and a rotating 2-inch touchscreen. The product name lists 4K/120fps video.

Joybuy
Sony ZV-E10 with 16-50mm zoom lens, black

Sony ZV-E10 with 16-50mm zoom lens, black

The zoom lens can be handy when you want to adjust the composition; check that the included range suits the distance from which you can photograph the tile.

The product description lists a 24.2 MP APS-C sensor, an E mount and a 16-50mm kit lens.

Joybuy
Sony Alpha A6100 with 16-50mm f/3.5-5.6 OSS II lens

Sony Alpha A6100 with 16-50mm f/3.5-5.6 OSS II

The zoom lens offers different focal lengths to adjust the framing; check whether the range suits the distance available and the space around the tile.

The product description lists a 24.2 MP sensor and a 16-50mm lens.

Joybuy

Frequently asked questions

Do you need to buy a macro lens for every tile?

No, not for every tile. Start by photographing the whole tile and decide which details you want to show. Only compare the maximum magnification of the specific lens or close-up mode if those details do not appear large enough in the frame. Canon lists a maximum of 0.25× in manual focus mode for the RF-S 18-45mm; Nikon lists 1:1 for the separate Nikon Z MC 50mm f/2.8 lens.

How can you keep photos from different workshop sessions consistent?

Keep a record of the camera angle, background and lighting set-up, and adjust the white balance to suit the light you are using. A tripod can help you recreate the same frame; check the white balance again if the daylight or lamps change.

What can you do if the camera does not work properly after you buy it?

For a consumer purchase in the Netherlands, the seller must provide a solution if a product is faulty. The Dutch government states that there is no fixed statutory guarantee period in the Netherlands; a manufacturer’s guarantee is separate from your statutory right to a product that works as it should. For online purchases from a business, you generally have 14 days to change your mind, subject to applicable exceptions.

Can you take recognisable photos of other makers and publish them?

Not without considering the circumstances and how the photos will be used. According to the Dutch Data Protection Authority, recognisable people in photographs count as personal data. Professional or commercial photography and publication require a lawful basis under the GDPR; consent may be one possible basis. Keep others out of shot if their presence is not necessary, and establish your lawful basis before publishing. The regulator describes an exception for strictly personal use that remains private.

Is support for connected TG-7 features still within the published support period?

No. The manufacturer lists 30 September 2026 as the end date for the support period for TG-7 firmware, OM Workspace and OI Share. This does not in itself mean that existing features will stop working from that date.