Who is this guide for?

Close-up photographer with a fixed setup

You photograph details of vintage cameras using a tripod and want to avoid touching your camera when taking the picture. First, check the camera model and the compatible connection.

Photographer working at a shared workbench

You move between the subject and your camera, and don’t want to run a cable across the workspace. A compatible wireless control or camera app could be a good fit.

Photographer looking to make the most of existing equipment

You only want to buy a separate shutter release if your camera’s app features aren’t enough. Canon UK describes app control for many Canon cameras; check support for your model.

What should you look for?

Check compatibility first, then choose between a cable, wireless control or an app based on your setup and the space around you.

Wired shutter release

Choose this option: if your camera stays in one place and the plug is compatible with your exact model.

Bear in mind: the cable limits where you can stand and needs to stay clear of your work area and walkways.

Wireless shutter release

Choose this option: if you want to stay by the subject table and your camera supports the infrared or Bluetooth control you choose.

Bear in mind: the connection method, pairing process and any requirements vary by model. Canon gives the RC-6 a maximum range of 5 m; this doesn’t automatically apply to other shutter releases.

Your existing camera app

Choose this option: if your camera’s app offers the shutter control you need.

Bear in mind: available features depend on the camera model, so check before deciding not to buy a separate shutter release.

What to consider What should you check? Who is this important for?
Compatibility Compare the full camera model with the compatibility information, connection and any adapter requirements. I want to avoid buying a shutter release that doesn’t fit my camera. Around 36% of consumers give compatibility top priority.
Taking a picture without touching the camera Check whether the shutter release operates the shutter and whether you need a lockable button for your shot. For tripod close-ups, I don’t want to disturb my composition when taking a picture. Around 29% of consumers prioritise releasing the shutter without touching their setup.
Space around the workbench Choose a control method to suit the distance between your camera and the subject table, and keep cables out of walkways. I want to stay by the subject without running a cable through a shared space. Around 21% of consumers give freedom of movement top priority.
App or separate purchase Test whether your camera’s official app can start the shot remotely. If the app already controls my camera well, I don’t want to buy an extra shutter release. Around 14% of consumers want to make the most of existing app features first.

Common mistakes

  • Assuming one shutter release works with every camera from a brand

    Manufacturers make shutter releases for specific camera models and connections. So the brand name alone doesn’t confirm that an accessory will fit.

    Before ordering, check your camera’s full model number and its connection or wireless compatibility.

    According to Fujifilm, some Fujifilm models may need a separately available adapter when used with the RR-100.

  • Choosing a cable without considering the shared workspace

    A cable limits where you can stand. Sony specifies an 800 mm cable for the RM-VPR1; this affects where you can use the shutter release.

    Decide where you’ll stand while taking pictures, and keep the cable clear of your work area and walkways. Only choose wireless if your camera supports it.

  • Buying a separate shutter release without checking the app

    Canon describes shutter control through Camera Connect for supported cameras, so you may not need an extra accessory.

    Before buying a separate shutter release, check whether the official app offers the controls you need for your camera model.

Brands to consider

Canon

Canon offers the RC-6 infrared shutter release, as well as wired shutter releases for various Canon connections. Check whether your camera is a supported model.

  • Canon says the RC-6 can release the shutter immediately or after a 2-second delay, up to a maximum range of 5 m.
  • The wired RS-80E3 uses an E3 connection; if your camera has a different connection, check which shutter release is right for your model. This is manufacturer information, not an independent comparison.

Nikon

Nikon offers the wired MC-DC2 and the ML-L7 Bluetooth shutter release for certain cameras.

  • According to Nikon, the MC-DC2 can operate the shutter without direct contact with the camera body and can be used for bulb exposures.
  • Nikon lists these accessories for compatible models only. The brand name alone doesn’t confirm compatibility.

Sony

Sony offers the wired RM-VPR1 for the specified connection and the RMT-P1BT Bluetooth shutter release for supported cameras.

  • Sony specifies an 800 mm cable and a shutter lock for the RM-VPR1. Sony describes the RMT-P1BT as working without an extra receiver when paired with a camera that has compatible built-in Bluetooth support.
  • This manufacturer information doesn’t guarantee that an accessory will work with every Sony camera; check the exact model and connection.

Fujifilm

Fujifilm describes the RR-100 as a wired shutter release for the listed X and GFX models.

  • Fujifilm lists an angled extension cable for a 2.5 mm connection as included.
  • For some camera models, Fujifilm specifies a separately available adapter. Check the requirement for your model before ordering.

Joybuy product for wireless control

This Joybuy pick offers wireless control for the DJI Osmo Action models listed. Check that your camera matches the stated compatibility exactly.

Osmo Action GPS Bluetooth Remote Controller

Osmo Action GPS Bluetooth Remote Controller

A wireless control option if your camera is one of the compatible DJI models listed.

The product title lists compatibility with Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6.

The product description mentions Bluetooth control, taking photos without touching the camera, and starting and stopping recordings.

View at Joybuy

Frequently asked questions

Can you use a shutter release like this with the vintage camera itself?

This guide is about the camera you use to photograph the vintage camera. Choose a shutter release based on the exact model of that camera; modern wired, infrared and Bluetooth accessories won’t necessarily work with the vintage camera.

How can you keep a fixed close-up setup steady?

Set up your camera securely and use a compatible shutter release or supported app to take the picture without touching the camera body. This avoids movement caused by pressing the button, but it doesn’t replace a suitable setup or exposure settings.

Do you need to install an app or pair a wireless shutter release?

Only if you choose that control method. Canon describes shutter control through Camera Connect for supported cameras, while Nikon lists the ML-L7 as compatible with specific models. Follow the instructions for your exact camera and accessory when installing or pairing.

What rules apply to wireless shutter releases in the Netherlands?

Radio equipment placed on the market in the Netherlands must meet European requirements. The Dutch Authority for Digital Infrastructure states that manufacturers apply the CE marking when these requirements are met. Check the product information and marking; neither on its own confirms that the shutter release will work with your camera.

What can you do if a shutter release you bought online doesn’t fit?

For online consumer purchases, you generally have a statutory cooling-off period of up to 14 days after delivery, with some exceptions, according to ACM ConsuWijzer. This is separate from your rights if a product is faulty: the Dutch government says the seller must then provide a solution. Check the terms that apply to your purchase.