Who can benefit from a remote shutter release?

Card maker with a permanent photo table

You photograph several cards from the same position and want to take pictures without touching the camera.

Card maker who keeps adjusting the composition

You want to take pictures from your worktable while the camera is positioned further away or above the table. The camera’s position and the connection method it supports determine which remote shutter release is right for you.

Card maker with a camera app

You want to check whether your camera and phone can already take pictures remotely before buying a separate accessory.

What should you look for when choosing one?

Wired remote shutter release

Suitable if: you work next to a fixed tripod setup and your camera has the right remote-release socket.

Bear in mind: the cable length determines how far you can stand from the camera. Sony lists an 800 mm cable for the RM-VPR1; Canon specifies a 60 cm cable for the RS-60E3.

Wireless remote shutter release

Suitable if: you want to rearrange cards at your worktable without having to stand by the camera each time, and your exact camera model supports the remote release.

Bear in mind: connection, range and operating position vary by model. Canon specifies infrared operation for the RC-6 from up to around 5 metres in front of a compatible camera.

Camera app

Suitable if: your camera and phone support remote operation and you want to see whether the app suits the way you work.

Bear in mind: compatibility and available features depend on the camera and app combination. Canon describes remote shutter operation through Camera Connect; Nikon describes camera operation through SnapBridge.

What to consider What should you check? Who is this important for?
Compatibility Look up the full camera model. For a cable, check the socket and whether you need an adapter; for wireless, check which connection method is supported. If I want to be sure the remote release works with my camera, I check the full model and socket. Around 36% of consumers prioritise compatibility.
Fixed composition Check that the cable reaches your usual shooting position and that you can operate the shutter without touching the camera body. When I photograph lots of cards from the same position, I want to take pictures without disturbing my setup. Around 29% of consumers prioritise keeping their setup in place.
Operating position Check where you stand while arranging your cards and whether the camera supports infrared or Bluetooth remote operation. Range and positioning requirements vary by model. If I want to stay by the cards while adjusting the composition, I need to operate the camera from my workspace. Around 21% of consumers prioritise freedom of movement at the photo table.
Existing app Test whether the app can operate the shutter remotely with your camera model before choosing a separate remote release. If I want to try using my own phone first, I test the camera app’s remote shutter function. Around 14% of consumers want to make use of existing app controls.

Buying pitfalls

  • Assuming the brand name proves compatibility

    A remote release won’t necessarily work with every camera from the same brand. Sockets and supported camera models vary.

    Before buying, look up your full camera model in the compatibility information and check the socket. If the connection is wrong, you may need to find a different cable or remote release.

  • Assuming infrared works from every position

    Canon lists a range of up to around 5 metres in front of a compatible camera for the RC-6. This may be less practical if you’re standing behind or beside a camera mounted above the table.

    Think about where you’ll be standing while arranging your cards, then check whether the remote release will work from there. If necessary, compare a suitable cable, Bluetooth option or camera app.

  • Checking only the camera name for a Fujifilm RR-100

    Fujifilm specifies a 2.5 to 3.5 mm adapter for the X-S10 and X-T200.

    As well as checking compatibility information, check the socket and whether you need an adapter for your exact camera model.

    Some models may require a separate adapter.

  • Buying a separate remote release without trying the camera app

    Canon Camera Connect and Nikon SnapBridge can offer remote camera control when used with compatible equipment.

    First, test whether your camera app can operate the shutter remotely. Then decide whether a separate remote release would suit the way you work better.

Relevant brands to consider

Canon

Relevant for EOS users comparing a wired remote shutter release, infrared or Bluetooth remote control, and operation through a camera app.

  • Canon lists infrared operation for the RC-6 from up to around 5 metres in front of compatible cameras. Canon lists specific compatible models for the BR-E1.
  • Check your exact camera model and its position; these accessories are not necessarily suitable for every EOS camera. Source: Canon Netherlands.

Nikon

Relevant for Nikon users considering a wired MC-DC2, an ML-L7 Bluetooth remote control or operation through SnapBridge.

  • Nikon describes touch-free camera operation with the MC-DC2, and separate shutter and video buttons on the ML-L7.
  • Nikon lists specific camera models for these accessories, so check whether your camera is supported. Source: Nikon Netherlands.

Sony

Relevant for Sony users comparing a wired RM-VPR1 with a wireless RMT-P1BT.

  • Sony lists an 800 mm cable, shutter button and shutter lock for the RM-VPR1.
  • The camera must support Bluetooth remote control to use the RMT-P1BT. Sony gives an approximate range of 5 metres, which can vary; check the information for your camera model. Source: Sony Netherlands.

Fujifilm

Relevant for owners of supported X or GFX cameras considering a wired RR-100 for a photo table.

  • Fujifilm specifies a 2.5 mm socket with an L-shaped extension cable.
  • For the X-S10 and X-T200, Fujifilm lists a separate 2.5 to 3.5 mm adapter. Check the connection for your exact model. Source: Fujifilm X Netherlands.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Do I need a tripod as well as a remote shutter release?

A remote shutter release won’t hold the camera in place for you. For repeated card photos, you’ll need a stable setup. Also check separately that the framing and exposure are right.

How do I connect a wired remote shutter release?

First, check which socket your camera model has and use a compatible cable. Canon specifies an E3 socket for the RS-60E3; for the RR-100 with the X-S10 and X-T200, Fujifilm lists a separate 2.5 to 3.5 mm adapter.

Why isn’t my Bluetooth remote responding?

First, check whether your camera supports operation via a Bluetooth remote control. Sony recommends this as the first check when troubleshooting connection problems; then follow the pairing instructions for your exact camera and remote.

Where can I recycle a flat battery from my remote control?

You can recycle a flat battery at shops and supermarkets that sell batteries, or at another designated collection point. The Government of the Netherlands explains where you can hand them in.

What are my rights if I’m unhappy with a remote release bought online, or it breaks?

For eligible online consumer purchases, you generally have a 14-day cooling-off period from the date you receive the item, subject to exceptions and conditions. A faulty product is covered by different rules from a purchase you’re simply unhappy with: according to ACM ConsuWijzer, your statutory guarantee depends on what you can reasonably expect from the product, and the retailer is responsible for this.