Which type of control is right for you?

Photographer with a fixed tabletop setup

You want to photograph a pocket watch without touching the camera once it’s set up. The connection on your camera determines which wired remote release will work. Canon, for example, lists separate E3 and N3 cable types, while Nikon specifies the MC-DC2 for certain cameras.

Photographer with limited table space

You want room to move the watch and adjust the lighting without a cable running across the table. Wireless control is only an option if your camera supports the remote you choose; Sony lists the RMT-P1BT for compatible cameras.

Photographer taking a series of shots

You want to take repeated shots or use a timer. An interval function or supported software may be more suitable than a simple shutter button. Canon EOS Utility, for example, offers an interval function for supported EOS cameras, while Hähnel lists timing modes for the Captur Timer Kit for Canon.

What should you consider when choosing?

Wired remote release

Choose this when: you’re working beside a securely positioned camera and your model supports the specific cable.

Consider: the cable needs to run across the small table without pulling on the camera or disturbing your setup.

Wireless remote release

Choose this when: a cable would get in the way as you work around the watch or lighting, and your camera is compatible.

Consider: check pairing and power requirements. Sony lists a communication range of around five metres for the RMT-P1BT, depending on conditions.

Timer or interval remote release

Choose this when: you need timed or repeated shots.

Consider: check that the extra features and required components suit your camera and workflow. They may be unnecessary if you’re taking just one shot.

Existing app or computer control

Choose this when: your camera supports the required app or software and you want to control your setup remotely.

Consider: support and available features vary by camera. Canon EOS Utility is an option for compatible EOS cameras.

What to consider What to check Who this matters to
Camera compatibility Look up the full camera model and check which connection or wireless function it supports. If I want to make sure the remote works with my camera, I check the model and connection specifications; around 36% of consumers put compatibility first.
Taking a picture without touching the camera Check that the control activates your camera’s shutter, and make sure the camera itself is stable. If I don’t want to disturb a fixed close-up setup when taking a picture, I look for a way to operate the camera without touching its body; around 29% of consumers give this top priority.
Space around the table Check wireless compatibility, pairing and power requirements before choosing wireless control. If I want to move the watch or adjust the lighting without a cable getting in the way, I look for wireless control that my camera supports; around 21% of consumers consider clear working space the most important factor.
Timed shots Compare the timer features of a compatible remote release with the capabilities of your camera or supported software. If I want to take repeated shots at set times, I check whether my camera or remote has a suitable function; around 14% of consumers put timing first.

Common buying mistakes

  • Assuming all remote releases from the same camera brand are interchangeable

    A brand may use different connections. Canon, for example, distinguishes between E3 and N3, while Nikon lists the MC-DC2 for certain cameras.

    Before buying, check your full camera model and the connection specified by the manufacturer.

  • Buying an advanced timer kit for a single shot

    Timer and interval functions aren’t needed for every tabletop shot.

    First decide whether you want to take one picture without touching the camera, keep the table free of cables or take a timed series.

    A more advanced kit may include components and power supplies you don’t need for a single shot.

  • Expecting the remote to stabilise the camera

    A remote can operate the shutter without you touching the camera body, but it won’t stabilise an unstable setup.

    Make sure the camera is secure first, then use a control that’s compatible with your model.

Brands to compare

The models and control options below are specific to certain brands and models, so check compatibility with your camera.

Canon

Canon lists the RS-60E3 for EOS cameras with an E3 connection and the RS-80N3 for models with an N3 connection.

  • A wired remote release is a straightforward option when its connection matches your camera.
  • The two cable types aren’t interchangeable simply because they’re from the same brand. EOS Utility only works with supported cameras and connections.

Nikon

Nikon lists the MC-DC2 as a wired remote control for certain cameras with a suitable accessory connection.

  • Nikon describes it as a way to operate the camera without touching its body, and to take bulb exposures.
  • Check whether your specific camera supports the MC-DC2.

Sony

Sony describes the RMT-P1BT as a Bluetooth remote control for compatible cameras.

  • With a compatible camera, it works without a shutter cable or an additional receiver.
  • Compatibility and pairing are essential. Sony lists a communication range of around five metres, depending on conditions.

Hähnel

Hähnel positions the Captur Timer Kit for Canon as a remote control with timing and interval options.

  • Hähnel lists several timing modes and camera cables included with the kit.
  • Check the compatibility and contents of the specific version; stated features and range are manufacturer claims.

Panasonic

Panasonic describes the DMW-RS2 as a wired option for supported Lumix cameras.

  • The Panasonic Singapore specification lists half-press, full-press and lock functions.
  • The specification doesn’t confirm compatibility with every Lumix model or availability in the Netherlands.

Camera remotes at Joybuy

This selection of Joybuy products covers wireless control for the Osmo cameras listed; check that your camera is one of the models named.

Osmo Action GPS Bluetooth Remote Controller for Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6

Osmo Action GPS Bluetooth Remote Controller

An option if you want to control one of the Osmo cameras listed wirelessly and take photos without touching the camera.

According to the product title, it’s compatible with Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6. Check that your camera model is on the list.

View at Joybuy

Frequently asked questions

Do I need to buy a separate remote if my camera can already take pictures remotely?

Not necessarily. First check whether your camera model supports a suitable app or computer control; Canon describes these options for compatible EOS cameras.

How do I connect a remote release without disturbing my tabletop setup?

First check the camera connection and model compatibility. Position the cable so that pulling it won’t move the camera. The Sony RMT-P1BT needs to be paired with a compatible camera via Bluetooth.

What extra components should I check for with a wireless or more advanced kit?

Check which power supply, receiver and camera cable are included with the specific version. This helps you make sure the kit suits your camera and workflow.

What rules apply to wireless camera remotes in the Netherlands?

Radio equipment is subject to European product requirements. The Dutch Authority for Digital Infrastructure explains that CE marking applies to equipment that meets the requirements; check the product information for the specific model.

Can I return a remote control bought online?

For distance purchases by consumers, a 14-day cooling-off period applies in many cases, according to the Dutch government. Terms and exceptions may apply; the legal guarantee is a separate right.