Who is this for?

Photographers with a fixed tabletop setup

You photograph framed prints from a stable, fixed camera position and want to release the shutter without touching the camera.

Photographers who work around the table

You change prints or check your setup from different positions and would rather not have a cable running through your workspace. Support for your camera model is still key.

Photographers who want to try an existing app first

You want to check whether your camera can be controlled remotely using a compatible app before buying a separate shutter release.

What should you look for?

First check compatibility with your camera, then choose between a cable, Bluetooth or a compatible app.

Wired cable release

A good fit if: you release the shutter from the edge of the table and your camera has the right socket.

Bear in mind: the cable needs to work with your workspace. Canon lists an 80 cm cable and an N3 connector for the RS-80N3; for the RR-100, Fujifilm specifies a separate adapter for the X-S10 and X-T200.

Bluetooth remote

A good fit if: you want to move around the table without a cable and your camera supports the remote you’ve chosen.

Bear in mind: you’ll need a separate remote, and the stated range varies by model. Canon specifies a range of up to 5 m for the BR-E1; this isn’t guaranteed to work in every setup.

Existing camera app

A good fit if: your camera app supports shutter control and you have a compatible phone or tablet.

Bear in mind: according to Canon, Camera Connect supports remote control on many, but not all, Canon cameras. Check your exact model and connection.

What to consider What should you check? Who is this important for?
Compatibility Look up the full camera model and check the manufacturer’s official compatibility information, the connection and whether an adapter is needed. I want to make sure the release works with my camera before choosing one; around 36% of consumers prioritise compatibility.
Fixed shooting position Check whether you can release the shutter without touching the camera body and whether a cable will get in the way of your setup. I want to leave the camera in the same place while releasing the shutter; around 29% of consumers prioritise keeping a fixed shooting position.
Freedom to move Check whether your camera supports the Bluetooth remote you’ve chosen and how it connects to the camera. When I change prints or move around the table, I don’t want a cable running through my workspace; around 21% of consumers prioritise being able to move around without a cable.
Existing app Check whether your camera model supports shutter control through an app and test the connection with your phone. I want to see if I can control the camera through an app first, so I don’t need a separate device; around 14% of consumers prioritise using an existing app.

Common buying mistakes

  • Choosing based on the camera brand alone

    A remote made for a particular brand won’t necessarily connect to every camera from that brand. Canon lists an N3 connector for the RS-80N3; Fujifilm says an adapter is needed for the RR-100 with certain models.

    Before buying, compare your full camera model, connection and any adapter required with the manufacturer’s information.

    For the Fujifilm RR-100, Fujifilm specifies a separate adapter for the X-S10 and X-T200.

  • Expecting the release to sort out your whole photo setup

    A remote stops you from having to touch the camera for every shot, but it won’t position the print, camera or lighting for you. DT Heritage identifies level alignment, consistent focus and controlled lighting as separate considerations when reproducing flat artwork.

    Set up the camera securely, then assess the framing and lighting separately from your choice of shutter release.

    Allow time to position the camera, print and lighting properly, too.

  • Buying a separate Bluetooth remote without checking the app

    Canon says Camera Connect supports remote control on many, but not all, Canon cameras. Depending on your camera model, an app may be an alternative.

    Check and test your camera’s app support before choosing a separate remote.

Camera brands and options to consider

Canon

For selected cameras, Canon offers the wired RS-80N3, the Bluetooth BR-E1 and Camera Connect as an app option for many models.

  • Canon lists an 80 cm cable with an N3 connector for the RS-80N3, and a stated range of up to 5 m for the BR-E1.
  • Connections and support vary by option and camera model, so check compatibility before choosing.

FUJIFILM

The wired RR-100 is an option for the camera models on Fujifilm’s compatibility list.

  • Fujifilm lists an L-shaped extension cable with a 2.5 mm jack for the RR-100.
  • For the X-S10 and X-T200, Fujifilm specifies a separate 2.5 mm to 3.5 mm adapter.

Nikon

The ML-L7 is Nikon’s Bluetooth option for specific Nikon cameras.

  • Nikon lists separate photo and video buttons, as well as controls for zoom and menus.
  • The product information doesn’t promise general compatibility with all Nikon cameras, so check your exact model.

Sony

The RMT-P1BT is a Bluetooth remote for Sony cameras that support this type of control.

  • Sony lists a status LED and operation without an extra receiver on cameras with the required built-in Bluetooth receiver.
  • Check whether your exact camera model supports the required Bluetooth controls.

Panasonic

Panasonic lists the DMW-RS2 as a remote for certain LUMIX cameras, including the DC-G97.

  • Panasonic product information describes the DMW-RS2E as a wired shutter release with a 2.5 mm connection.
  • Check whether your LUMIX model supports this remote and connection.

Joybuy products

These product options are intended for use with a compatible smartphone from a tabletop tripod, or with the Osmo cameras listed. Check that your device is supported before choosing them as an alternative to a camera remote.

KINSI foldable smartphone tripod with Bluetooth remote

KINSI smartphone tripod with Bluetooth remote, foldable and height-adjustable

For a fixed tabletop setup with a compatible smartphone: the Bluetooth remote can trigger the smartphone camera remotely.

The product name describes a foldable, height-adjustable tripod. The product description says it can be used on a table and placed on a flat surface.

View at Joybuy
Osmo Action GPS Bluetooth remote for the listed Osmo models

Osmo Action GPS Bluetooth remote

For remote control with a compatible Osmo camera: the product description says you can take photos without touching the camera.

The product title lists compatibility with Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6.

View at Joybuy

Frequently asked questions

Can I use the camera’s self-timer when it’s on the table?

Yes, if your camera has a suitable self-timer and the delay works for the way you shoot. Check the settings for your camera model. With a compatible remote or app, you can release the shutter without touching the camera body.

How can I avoid buying a cable release with the wrong connection?

Look up your full camera model and connection in the camera documentation, then compare them with the manufacturer’s information. The Canon RS-80N3 uses an N3 connector; Fujifilm specifies a separate 2.5 mm to 3.5 mm adapter for the RR-100 with the X-S10 or X-T200.

How do I maintain a camera remote?

Follow the care instructions for your exact model and check that the connection and buttons work before a shoot. This helps you avoid discovering that the controls aren’t responding once you’ve started taking photos.

What can I do if a shutter release I bought online doesn’t fit?

For a standard online consumer purchase in the Netherlands, you generally have a 14-day cooling-off period from delivery, with some exceptions. ACM ConsuWijzer also explains that your statutory guarantee applies alongside any manufacturer’s or retailer’s guarantee if a product doesn’t perform as you could reasonably expect under normal use. Check which terms apply to your purchase.