Who is a camera remote useful for?

Photographer with a permanent close-up setup

If you want to take a shot from a tripod without touching the camera, first check whether your camera model supports the relevant connection or wireless control. Canon and Fujifilm list wired options for specific connections and camera models.

Maker working at a shared worktable

If you’d rather not move past the camera to take a shot, weigh up the cable route against the freedom of movement offered by a compatible wireless remote. Sony describes a Bluetooth remote that doesn’t require a direct line of sight; just check that your camera model is supported.

Photographer who already uses a camera app

First, check whether you can control your camera remotely using an app. Canon Netherlands describes Camera Connect as compatible with a wide range of Canon cameras, but not every model.

What should you look for?

Wired shutter release

A good fit if: you work next to the camera and your camera model supports the shutter release’s connection.

Bear in mind: the cable length determines where you can stand. Plan its route across a shared worktable.

Bluetooth remote

A good fit if: you want more room around your tripod and your camera supports that specific model.

Bear in mind: check compatibility and any pairing steps before you start taking photos.

Camera app

A good fit if: you can control your camera’s shutter using an app on your smartphone or tablet.

Bear in mind: features vary by camera model, so check that the app offers the controls you need.

What to consider What should you check? Who is this important for?
Compatibility Check the full camera model and its connection or wireless support. Canon distinguishes between E3 and N3 connections; for the X-S10 and X-T200, Fujifilm specifies an adapter for the RR-100. If I buy a shutter release, I want to be sure it’ll work with my camera. Around 36% of consumers put compatibility first.
Taking photos without touching the camera Check whether the shutter release lets you operate the shutter from your workspace; a stable camera setup is still important too. For close-ups, I don’t want to touch the camera when I take a shot. Around 29% of consumers prioritise taking photos without touching the camera.
Space around the worktable Compare the cable length or stated range of the specific wireless model, and plan where a cable will run around your workspace. Canon gives the BR-E1 a range of 5 m; this doesn’t automatically apply to other Bluetooth models. At a shared table, I want enough room to move without having to pass the camera. Around 21% of consumers prioritise having room to move.
Existing app controls Check the information for your camera model to see whether the app lets you operate the shutter remotely. Canon describes Camera Connect as compatible with a wide range of Canon cameras. Before I buy a separate accessory, I want to know whether my camera app can already take photos remotely. Around 14% of consumers check this first.

Common buying mistakes

  • Assuming every shutter release from the same brand will fit

    Manufacturers use different connections, and some remotes are only compatible with specific camera models. The Fujifilm RR-100 requires a separate adapter for the X-S10 and X-T200.

    Before placing your order, look up your full camera model in the compatibility information and check the connection and whether an adapter is needed.

  • Choosing wireless without checking compatibility and pairing

    Not every camera supports every wireless remote. Sony says the RMT-P1BT remote must be paired with the camera before the first connection.

    Check both model names and read through the pairing steps before setting up your worktable.

    Allow time for pairing before you can start taking photos.

  • Forgetting about the cable route across a shared worktable

    With a wired shutter release, the cable length determines where you can stand. A cable running across your workspace without a plan can get in the way.

    Decide in advance where to place the camera, the earring and your control position, then route the cable appropriately.

Brands to compare

Canon

For compatible cameras, Canon offers wired E3 and N3 shutter releases, the BR-E1 Bluetooth remote and control via Camera Connect.

  • Canon pairs the RS-80E3 with E3 cameras and the RS-80N3 with N3 cameras. The BR-E1 is a wireless option for supported cameras.
  • These models aren’t automatically compatible with every Canon camera. Check the connection or wireless support for your exact camera model.

Nikon

The ML-L7 is a Bluetooth remote for specific Nikon cameras.

  • Nikon lists separate photo and video buttons, as well as zoom and menu controls.
  • Compatibility and available features depend on the camera model. Check the product information for your camera.

Sony

The RMT-P1BT is a Bluetooth option for cameras that support this remote.

  • Sony says the wireless remote doesn’t require a direct line of sight.
  • Check support for your exact camera model and pair the remote before use.

Fujifilm

The RR-100 is a wired shutter release for the camera models Fujifilm lists as compatible with this accessory.

  • Fujifilm lists an L-shaped extension cable for a 2.5 mm jack as included.
  • For the X-S10 and X-T200, Fujifilm specifies a separate 2.5 mm to 3.5 mm adapter.

Joybuy product pick

The Joybuy pick below is a Bluetooth remote for the Osmo cameras listed. Before buying, check that your camera model appears on the compatibility list.

Osmo Action GPS Bluetooth remote

Osmo Action GPS Bluetooth remote

For remote control and taking photos without touching the camera, according to the product description.

Compatibility according to the product title: Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6.

View at Joybuy

Frequently asked questions

Do you always need to buy a separate shutter release for macro photography?

No. First check whether you can control your camera’s shutter remotely using an app. Canon describes Camera Connect as compatible with a wide range of Canon cameras, but not every model.

How do you set up a Bluetooth remote?

First, check whether your camera model supports the remote. For the Sony RMT-P1BT, Sony says you need to pair the remote with the camera before the first connection. For other models, follow the relevant instructions.

What should you check if a wired shutter release doesn’t seem to work?

Compare your exact camera model and connection with the manufacturer’s information. A Canon E3 shutter release isn’t automatically suitable for N3; Fujifilm specifies an adapter for the RR-100 for the X-S10 and X-T200.

What are your rights when you buy a shutter release online?

When you buy from a business online in the Netherlands, you’re often entitled to a 14-day cooling-off period, although exceptions and the circumstances of the purchase may apply. If the product is faulty, the Dutch government lists free repair or replacement as possible options.

Where can you recycle empty batteries from a wireless remote?

In the Netherlands, don’t put empty batteries in your general waste. The Dutch government lists shops and supermarkets that sell batteries as examples of collection points.