Photographers using a camera tripod
You want to avoid touching your camera for close-ups or longer exposures, and need a remote that’s confirmed to work with your camera model. Nikon UK recommends using a tripod for close-up food photography.
Start by checking your exact camera model: a remote must match the camera’s port or wireless control system. A compatible cable is practical if you can stay beside your tripod. If a cable would get in the way, choose compatible wireless control, or first try a supported camera app. A remote shutter release means you don’t have to touch the camera when taking the shot, but it can’t replace a stable setup or careful lighting.
You want to avoid touching your camera for close-ups or longer exposures, and need a remote that’s confirmed to work with your camera model. Nikon UK recommends using a tripod for close-up food photography.
You’d rather keep cables away from your cup, accessories and tripod, so you’re comparing a compatible wireless shutter release with a wired option.
You want to check whether your camera and phone can release the shutter remotely before buying a separate accessory. Canon UK lists Camera Connect as an option for many cameras.
Choose this if: your camera has the right remote-control port and you can stay beside your setup.
Keep in mind: the cable needs to run around your small table without pulling on the tripod or coffee cup.
Choose this if: your camera model is explicitly supported and you want to take the shot from outside your cramped table setup.
Keep in mind: check compatibility, pairing and power requirements separately. Wireless doesn’t necessarily mean you won’t need a receiver or cable.
Choose this if: your camera can release the shutter remotely using a compatible phone, and you also want to check settings or framing.
Keep in mind: app control only works with supported cameras; it isn’t a universal standalone Bluetooth shutter release.
| What to consider | What should you check? | Who is this important to? |
|---|---|---|
| Compatibility | Check your exact camera model against the compatibility information. If you’re choosing a cable, check the connector type too. | When I buy a shutter release, I want to be sure it works with my exact camera model. Around 36% of consumers put compatibility first. |
| Taking photos without touching the camera | Check that the remote activates your camera’s shutter and that you can take the shot from your chosen position. | For tripod-mounted close-ups, I want to take the shot without touching the camera. Around 29% of consumers prioritise a hands-off setup. |
| Space around the table | Plan where the camera, tripod, cup and your hand will go. Check whether you can keep the cable out of the frame. | With limited working space, I want to avoid running a cable past the cup or tripod. Around 21% of consumers prioritise a clear setup. |
| Extra devices and power | Try your camera model’s app function, or check the power requirements and included components of a separate shutter release. | If I already have a compatible phone, I want to check whether it can control the shutter before buying anything else. Around 14% of consumers want to avoid extra devices and power requirements. |
Canon and Nikon list compatibility for specific camera models. A wired shutter release also needs the right connector.
Before ordering, compare your full camera model and, for a wired option, the connector type with the product specifications.
A wireless kit may still use a receiver and connection cable. Sony describes the RMT-P1BT as controlling compatible cameras via their built-in Bluetooth receiver, while JJC says the ES-628C2 includes a transmitter, receiver and connection cable.
Check what’s in the box, the power requirements and whether you have room for a receiver before choosing a model.
The JJC ES-628C2 kit includes a receiver and connection cable. Allow space for these around your camera and check what power supply is needed.
Canon UK says Camera Connect can remotely activate the shutter on many compatible cameras.
First check whether your camera model supports the app, then try connecting it in the setup you plan to use for photography.
Canon offers the BR-E1 for listed camera models. Camera Connect may be an app-based alternative for many compatible cameras.
The ML-L7 is a Bluetooth remote for specific Nikon cameras; Nikon gives the Z 30 as an example.
The RMT-P1BT is a wireless option for cameras that support this Bluetooth remote.
The wired S-C2 and wireless ES-628C2 illustrate different connection options for cameras with a compatible port.
This product selection features a wireless camera remote for the Osmo models named in the product title.
No image available
An option if you use one of the Osmo models listed and want to take photos remotely without touching the camera.
Bluetooth control; the product title lists compatibility with Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6. The product information lists one long and one short wrist strap. Before use, check that the required CE marking is present and confirm compatibility with your exact model.
No. Taking the shot remotely means you don’t touch the camera at the moment of capture, but a stable setup is still important. Nikon UK describes using a tripod and tethered shooting for close-up food photography; this doesn’t guarantee the results of every shot.
First check that your exact camera model is compatible, then follow the pairing instructions for the camera and remote. Having Bluetooth on both devices doesn’t, by itself, prove that they’ll work together.
When buying online from a business, you’ll often have a 14-day cooling-off period, but the seller and any exceptions matter. The Dutch government also states that the seller is your point of contact if a product is faulty. Check the terms that apply to your purchase.
Check that the required CE marking is present. The Dutch Authority for Digital Infrastructure advises against using a device with a missing or incorrect CE marking and recommends contacting the seller. A CE marking doesn’t prove that the shutter release will work with your camera.