Who is this guide for?

Circuit board photographer with a fixed setup

You want to take close-ups repeatedly without touching the camera for every shot. A compatible connection and a cable that can run safely along the table are important; Canon and Nikon list wired options for specific models.

Photographer with limited table space

You want to release the shutter without running a cable across the circuit board and lighting. Canon, Nikon and Sony link their listed wireless remotes to supported camera models.

Photographer who wants to use what they already have

You want to check whether your camera can already be operated remotely using a supported app. Canon describes Camera Connect as compatible with a wide range of Canon cameras.

What should you look for?

First check camera compatibility, then decide whether a cable can run conveniently along the table, and finally see whether a supported app will do the job.

Wired remote

Choose this if: your camera has the right connection and the cable can run neatly along the small table.

Bear in mind: the connector type, camera model and cable route all matter; the cables listed are not interchangeable.

Bluetooth remote

Choose this if: the manufacturer supports your camera model and you don’t want a cable across your work surface.

Bear in mind: Bluetooth on the camera alone doesn’t prove that a particular remote will work with it; also check the product information for compliance details.

Camera app you already have

Choose this if: your camera supports control through an app and you’d like to try working without a separate remote first.

Bear in mind: features depend on the camera, app and connection; check that your model is supported.

What to consider What to look for Who is it for?
Compatibility Check the full camera model and, for a cable, the connector type. If you’re looking for a remote for your camera, you’ll want to avoid a mismatch between the connection or model support. Around 40% of consumers put compatibility first.
Hands-free operation Check whether the remote offers the shutter-release controls you need and, if required, a half-press to focus. For close-ups with a fixed setup, it can be important to release the shutter without touching the camera body. Around 30% of consumers give this their highest priority.
Space around the table Compare the cable route with your workspace, or check that your camera supports wireless operation. If you move circuit boards or lighting around on a small work surface, you won’t want a cable across the tabletop. Around 20% of consumers prioritise keeping their workspace clear.
Avoiding an extra accessory First check whether an app supports your camera model and offers the controls you need. If you already use a suitable camera app, you may want to see whether it’s enough for your shots before adding a separate remote. Around 10% of consumers give this their highest priority.

Common pitfalls

  • Assuming compatibility from the camera brand alone

    The cables and Bluetooth remotes listed are designed for specific connections or supported camera models.

    Before buying, compare the full camera model with the compatibility information and, for a cable, check the connection too.

  • Forgetting about the cable route on a small table

    A cable can get in the way when you’re moving circuit boards or lighting. Canon states that the RS-80N3 has an 80 cm cable.

    Decide where the camera, circuit board and controls will go, then check that a compatible cable can run clear of your workspace.

  • Confusing a Bluetooth button for a phone with a camera remote

    A smartphone shutter button won’t necessarily release the shutter on a mirrorless camera; camera remotes are often limited to supported models.

    Check the compatibility information for your camera, and try an app first if the manufacturer supports camera control through it.

Brands to consider

Canon

Canon lists both wired and wireless options for certain EOS cameras. It also describes control through Camera Connect for a wide range of models.

  • Canon states that the RS-80N3 has a two-stage button and an 80 cm cable; the remote uses an N3 connector.
  • The BR-E1 offers a cable-free control option for compatible cameras.
  • Check that your camera is compatible; these features don’t apply to all Canon remotes.

Nikon

Nikon describes the wired MC-DC3 for supported Z cameras and the ML-L7 for specific cameras that support this Bluetooth remote.

  • Nikon lists half-press, full-press and lock functions for the MC-DC3.
  • The ML-L7 has separate buttons for taking photos and recording video.
  • Check which features are available for each camera and remote combination.

Sony

Sony describes the RMT-P1BT as a Bluetooth option for cameras that support this remote.

  • Sony says it works without a cable or additional receiver; the remote also has a status indicator.
  • These are features of the model listed, not a comparison of performance. Check whether your camera is supported.

Panasonic

Panasonic lists the wired DMW-RS2 as a separately available remote for the LUMIX DC-S1.

  • This gives you a specific camera and accessory combination described by the manufacturer.
  • This doesn’t mean the DMW-RS2 works with every LUMIX camera; check the details for your camera body.

Joybuy products

The products below are Bluetooth selfie sticks with controls for smartphone cameras. They are not described as remotes for mirrorless cameras. For circuit board photography with a mirrorless camera, check for a model-specific camera remote or a supported camera app.

KINSI selfie stick with tripod and Bluetooth remote

KINSI selfie stick with tripod, 170 cm, Bluetooth remote

Designed for anyone who wants to control a smartphone camera remotely and position their phone hands-free; it is not described as a remote for a mirrorless camera.

The product name lists an extendable 170 cm stick, a rotating phone holder and support for 4.7–6.0-inch smartphones.

View at Joybuy
Ulanzi JJ02 Bluetooth selfie stick with remote

Ulanzi JJ02 Bluetooth selfie stick, 3-in-1

A good fit for anyone who wants to control a smartphone camera remotely and hands-free; it is not described as a shutter release for a mirrorless camera.

The product name lists an extendable mini tripod setup, dual cold shoe mounts and compatibility with iPhone and Android.

View at Joybuy

Frequently asked questions

Can I use a Bluetooth button for my smartphone with my mirrorless camera?

No. Bluetooth alone doesn’t prove that a particular button will work with a mirrorless camera. Manufacturers limit the remotes they list to supported camera models, so check the accessory information against your camera’s full model name.

How can I stop a cable getting in the way of my circuit board setup?

Before taking your shots, decide where the cable will run along the table and make sure it stays clear. Canon lists an 80 cm cable for the RS-80N3; that doesn’t mean a different length or connection will be suitable.

Do I need a separate remote if my camera supports an app?

Not necessarily: Canon describes shutter control through Camera Connect for a wide range of Canon cameras. Check that your camera model and phone are supported, and that the app offers the controls you need.

What are your rights in the Netherlands if a camera accessory is faulty?

When you buy as a consumer, you’re entitled to a product that meets the required standard, and the retailer is your point of contact if something goes wrong. The Dutch government states that there is no fixed statutory guarantee period in the Netherlands; what you can expect from a product depends, among other things, on the product and the information provided.

What should I check when buying a wireless camera remote?

Check that your camera model is supported and read the product information about compliance. The Dutch Authority for Digital Infrastructure states that compliant radio equipment receives a CE mark to be placed on the market in the European Union; this general rule does not confirm that a particular device being sold complies.