Who is this buying guide for?

Detail-focused stamp carver

You film fine cutting lines and want to check focus and framing without repeatedly walking over to the camera screen. The focus and image-assist tools on Portkeys and Atomos monitors are suited to this need.

Maker with a fixed camera setup

You want to connect and power the monitor without running cables or placing a screen in the middle of your work area. Power options vary by model, so make sure they suit your permanent setup.

Maker working in changing room light

You want to check while filming that both the light and dark areas of your work remain visible. Models from Atomos and Portkeys offer specific tools for checking the image and exposure.

What should you look for when buying?

First, check that your camera and monitor support the same HDMI signal. Then decide where the screen can go and which power options and image-assist tools suit your workspace and the lighting while you film.

What to consider What to look for when buying Who is this important for?
Fine lines and focus Check the screen resolution and whether the model offers magnification or focus peaking. For close-ups, I want to check fine cutting lines without repeatedly walking over to the camera. Around 36% of consumers in this situation prioritise focus checking.
Video signal and connection Compare the camera output and recording mode with the monitor’s supported HDMI input and any loop-through output. I want the camera signal to appear on the monitor without any problems. Around 29% of consumers in this situation prioritise a compatible signal connection.
Positioning and power Check the mounting options, available space, power supply and what’s included with the exact version you’ve chosen. For a permanent workspace, I want to position and power the monitor without blocking the cutting area. Around 21% of consumers in this situation prioritise practical positioning and power.
Exposure in changing light Check whether the exact model offers tools such as waveform, zebras or false colour. If the room lighting changes, I want to check bright areas and dark grooves while filming. Around 14% of consumers in this situation prioritise exposure checking.

Pitfalls to avoid when choosing

  • Confusing ‘4K HDMI’ with a 4K screen

    Input resolution and panel resolution are different specifications. Portkeys lists the PT5 II as having a 1920 × 1080 panel and a maximum HDMI input of 4K UHD at 30p.

    Before buying, compare your camera output and recording mode with the input formats supported by the exact monitor model.

  • Assuming every version includes the same accessories

    Godox’s manual distinguishes between the GM6S Pro Kit1 and Kit2 based on the HDMI cables included.

    Check what’s included with the exact version on offer and make sure it matches the cables, power supply and mounting options you need.

    A suitable cable, battery, charger or mount may vary from one package to another, so check what else you’ll need for your setup.

  • Assuming loop-through output or camera control based on the brand name

    According to Atomos, the Shinobi GO and Shinobi II don’t have an HDMI loop-through output, while the Shinobi 7 II does. Camera control is only relevant for explicitly supported camera models.

    Check the connections and any compatibility list for the full model before planning to use loop-through or control functions.

Relevant brands to consider

Portkeys

The PT5 II is a compact HDMI monitor for viewing close to your work.

  • Portkeys says the PT5 II has a 5-inch screen with a resolution of 1920 × 1080 and tools such as peaking and waveform.
  • The stated maximum input is 4K UHD at 30p. Check that this suits your camera’s signal.

FEELWORLD

The P6XL has a larger screen and a built-in battery; the FW568 PRO is a separate range with different power specifications.

  • FEELWORLD lists the P6XL as having a built-in 22,2 Wh battery and a two-hour runtime at 100% brightness.
  • That stated runtime is at full brightness. For longer sessions, check the power and charging options for the version you’ve chosen.
  • For the separate FW568 PRO, FEELWORLD lists a 6-inch Full HD screen and 4K@60Hz HDMI support.

Atomos

The Shinobi GO and Shinobi II are compact monitor ranges; connections and camera control vary by model.

  • Atomos lists image and exposure tools, including waveform, for the Shinobi GO.
  • According to Atomos, the Shinobi GO and Shinobi II don’t have an HDMI loop-through output; the Shinobi 7 II does. Camera control depends on whether your camera model is supported.

Godox

The GM6S Pro is an HDMI camera monitor for which the package version matters when setting up a permanent workspace.

  • Godox lists HDMI input and output up to 4K@60Hz, with power via DC, USB-C or an NP-F battery.
  • The manual distinguishes Kit1 and Kit2 by the HDMI cables included. Don’t assume every version comes with the same items.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I connect any camera with HDMI to any HDMI camera monitor?

No. Check the connection, resolution and frame rate of the camera signal against the input formats supported by the exact monitor model. For example, Portkeys lists the PT5 II’s maximum input as 4K UHD at 30p; supported formats for the Atomos Shinobi GO are also model-specific.

Does the monitor have to go next to the camera?

No, you can position the monitor wherever it’s easy to see without blocking the cutting area. Then check that the mount, cable length and power supply work for that spot. Portkeys lists a monitor mount as included with the PT5 II.

Do I need a separate battery for a long filming session?

That depends on the model and your power setup. FEELWORLD gives the P6XL’s built-in battery a runtime of two hours at 100% brightness and describes charging via USB-C. For longer sessions, check which power supplies are approved for the version you’ve chosen.

What are my rights if I buy online or receive a faulty product?

When you buy from a business online, you’re often entitled to a 14-day cooling-off period, although there are exceptions. The Dutch Government also states that a product must be of satisfactory quality, but there is no single fixed statutory guarantee period for all products in the Netherlands.

What should I know about electrical product safety and disposal?

According to the European Union, CE marking is required for products covered by specific harmonised EU rules. It is a declaration by the manufacturer and, on its own, does not prove that every purchase is safe. For discarded electrical appliances, the Dutch Government lists options including a municipal recycling centre and a take-back scheme when you buy a new, similar appliance.