Who is a camera monitor suitable for?

Creators who paint and film at the same time

If you paint and present, a monitor on your work table can help you check that your hands and artwork are in shot and in focus. Amateur Photographer’s buying guide discusses external camera monitors for video, while Portkeys describes the focus tools on the PT5 II.

Creators with limited setup space

In a small room, you need to fit the screen, cables, mount and power supply around your table. Atomos outlines the power options for the Shinobi II; check which components you’ll need for the specific version you choose.

Creators who need a separate recording

If you need a separate recording as well as a live view, a monitor-recorder could be a good option. Blackmagic Design lists an SD card recorder for the Video Assist 5-inch 3G; this is different from simply viewing the camera feed.

What should you look for when choosing one?

Start with your camera’s output and the signal it supports. Then choose a screen size and image tools, and consider a recorder only if you really need a separate recording.

What to consider What should you check? Who is this most important for?
Camera signal Compare the output from your exact camera and filming mode with the monitor’s supported resolution and frame rate. Check which cable you need, too. If I want to avoid buying a monitor that won’t work properly with my camera, I check the signal connection first. Around 31% of consumers give compatibility top priority.
Focus and framing From your workspace, consider which screen size will suit you, and check whether the exact version has features such as peaking, zoom or frame markers. If I want to see whether my brush tip, hands and artwork stay sharp and in frame while I paint, I focus on detail-checking features. Around 25% of consumers prioritise focus and framing.
Space and power Check where the monitor will go, the mounting point, the power input and what comes with the version you choose. If space is limited in my room and on my table, the screen, mount and power supply all need to fit into my setup. Around 25% of consumers give space and power top priority.
Exposure monitoring Check whether the monitor has features such as waveform, histogram or false colour, and consider whether they suit the way you work. When the light in my room changes, I want to be able to assess the camera signal while filming. Around 19% of consumers prioritise exposure monitoring.

Common pitfalls

  • Choosing a monitor without checking the camera signal

    An HDMI connection alone doesn’t tell you whether the monitor accepts your camera’s video format. So even when connected, the monitor may not show a usable image.

    Compare the output from your exact camera and filming mode with the input specifications of the monitor model you’re considering.

  • Confusing 4K HDMI with a 4K screen

    Input format and screen resolution are different specifications. Portkeys lists a maximum of 4K UHD 30p via HDMI for the PT5 II, with a screen resolution of 1920 × 1080 pixels.

    Check the supported input signals and screen resolution separately, then decide which details you need to see from your viewing position.

  • Assuming a battery, mount or storage is included

    According to Atomos, the Shinobi II has no built-in battery. For the LUT7 version consulted, FEELWORLD states that the battery is not included; a Video Assist recorder uses a storage medium.

    Check what’s in the box for the exact version and make a list in advance of what you need for power, mounting and any recording.

    You may need a separate power supply, mount or storage, adding extra components to your setup that you’ll need to connect or carry.

Camera monitor brands to consider

Portkeys

The PT5 II is a compact HDMI viewing monitor for setups where a 5-inch screen is big enough.

  • According to Portkeys, the PT5 II has HDMI input and output, peaking, waveform and false colour. The manufacturer specifies a maximum of 4K UHD 30p via HDMI; check that this is compatible with your camera’s signal.
  • These specifications apply to the PT5 II and not necessarily to other models from the brand.

Atomos

The Shinobi II is an HDMI viewing monitor with tools for focus and exposure monitoring.

  • Atomos specifies a 5.2-inch screen, peaking, zoom and waveform. According to the manufacturer, the monitor can be powered via NP-F or USB-C PD.
  • The Shinobi II has no built-in battery. Camera control, if available, is a separate compatibility consideration and isn’t guaranteed by a working HDMI connection.

FEELWORLD

The F6 PLUS is a smaller HDMI option, while the LUT7 has a larger screen for setups where the monitor is further from your workspace.

  • FEELWORLD lists HDMI input and output, plus focus and exposure tools for the F6 PLUS. For the LUT7, the brand specifies a 7-inch screen and 2200 nits.
  • The brightness figure is provided by the manufacturer; it isn’t a measurement taken in your room. The battery is not included with the LUT7 version consulted.

Blackmagic Design

The Video Assist 5-inch 3G is worth considering if you want to record externally as well as monitor your footage.

  • For this model, Blackmagic Design lists HDMI and 3G-SDI, an SD card recorder and support for video formats up to 1080p60.
  • The features of Video Assist 12G HDR models don’t necessarily apply to the 5-inch 3G version.

Products on Joybuy

Related products will be available soon.

Frequently asked questions

Can I connect any camera to an HDMI camera monitor?

No. First check that your camera outputs a video signal while filming that the monitor supports. Compare the connections, resolution and frame rate of your camera and filming mode with the specifications for the exact monitor model; manufacturers such as Atomos and Portkeys list these for each model.

How do I position and power a monitor next to my painting table?

First decide where you’ll be looking from, then check the mount, power supply and box contents for the version you’ve chosen. Portkeys lists a monitor mount and HDMI cables for the PT5 II; Atomos states that the Shinobi II has no built-in battery and is powered via NP-F or USB-C PD.

Will a standard camera monitor record my lesson too?

Not automatically: a viewing monitor and a monitor-recorder are different types of product. Blackmagic Design lists an SD card recorder for the Video Assist 5-inch 3G; for recording, also check that the camera signal and storage medium you need will work with your setup.

What should I check about components and service?

Before buying, check which cables, mount, battery and storage media are included with the version you’ve chosen. The Dutch Government states that online shops and platforms must tell consumers who is responsible for delivery and handling returns.

Can I publish lesson videos showing housemates or students who are recognisable?

Consider their privacy if you film people who can be recognised and share the video. The Dutch Data Protection Authority treats identifiable people in images as personal data; the GDPR becomes relevant when this goes beyond personal or household use. In that case, you need an appropriate legal basis, and according to the Dutch Data Protection Authority, this is consent in many cases.