Who is a camera monitor suitable for?

Teacher demonstrating card details

You want to see from your workstation whether cut edges, stamps and hand movements remain in sharp focus. Screen position, magnification and focus peaking may all be worth considering. Atomos and Portkeys list these focusing aids for the Shinobi II and PT6 respectively.

Maker with an assistant watching along

You may want to send the camera feed to a second screen. Check whether the exact monitor has an HDMI output and which output formats it supports; an HDMI input alone is not enough. Portkeys and FEELWORLD list an HDMI output for the PT6 and F6 PLUS V2.

Maker who packs everything away after each session

You share the table and want to be able to move the screen, mount, power supply and cables after the class. So, look at the complete set-up, not just the screen dimensions. Power options vary by model: Atomos lists NP-F or USB-C PD power for the Shinobi II.

What should you look for?

Start by checking your camera’s signal. Then work out which details you need to see from your workstation, whether someone else needs to watch along and how much room you have for the screen and power supply.

What to consider What to look for when buying Who should prioritise this
Small details and sharpness Assess the screen size, viewing position, magnification and focus peaking using a test recording of your card-making. If I want to check cut edges and small details from my workstation, magnification and focusing aids are important. Around 36% of consumers prioritise checking details.
Connecting to the camera Compare your camera’s HDMI output and recording mode with the input specifications and frame rates of the exact monitor model. I want to know before the class whether my camera, cable and monitor will work together in my chosen recording mode. Around 29% of consumers prioritise compatibility with their camera’s signal.
Watching on a second screen Check whether the monitor has an HDMI output and whether the second screen accepts the output format. If an assistant or participant needs to watch at the same time, I need a suitable output and a compatible output format. Around 21% of consumers put watching together first.
Space, mounting and power Measure the space and cable route; check the mount, power options and which accessories are included with that version. I want to be able to clear the screen and cables away from the card-making area after use. Around 14% of consumers prioritise a compact set-up that’s easy to pack away.

Common buying mistakes

  • Assuming ‘4K HDMI’ means a 4K screen

    An input that accepts certain 4K signals does not mean the screen itself has a 4K resolution. Atomos and Portkeys list a panel resolution of 1920 × 1080 for the Shinobi II and PT6, with support for certain 4K signals up to 30 fps at the input.

    Compare your camera’s HDMI output format in your preferred recording mode with the input specifications of the exact monitor.

  • Assuming every HDMI connection passes the picture through

    An HDMI input receives a picture, but that does not automatically mean the monitor can also feed a second screen. Atomos lists an HDMI input for the Shinobi II; Portkeys also specifies an output of up to 1080p60 for the PT6.

    If someone needs to watch along, check that there’s an HDMI output and what format it passes through.

  • Treating every ‘F6 Plus’ version as the same model

    FEELWORLD describes the F6 PLUS V2 as a 6-inch model and notes that some features vary depending on the hardware and firmware version. So, the name alone does not mean that another version is equivalent to the V2.

    Check the full model name and version of the product on offer.

  • Allowing for the screen dimensions only

    The complete set-up also needs room for the power supply, mount and cables. Atomos states that the Shinobi II has no built-in battery; Portkeys gives the weight of the PT6 excluding the battery.

    Plan for the screen, mount, power source and cable route, and keep the card-making area clear.

Brands to consider

Portkeys

The PT6 is a compact HDMI monitor for anyone who wants to check the picture themselves and may also want a second person to watch along.

  • Portkeys says the PT6 has peaking, magnification, and HDMI input and output. The manufacturer lists input support for up to 4K UHD 30 fps.
  • According to Portkeys, the output is limited to 1080p60. Check the input and output separately if you want to use a second screen.

Atomos

The Shinobi II is a good fit if you’re looking for a compact screen with focusing and exposure aids.

  • Atomos specifies a 5.2-inch screen, a stated brightness of 1500 nits, peaking and power via NP-F or USB-C PD.
  • The listed video connection is an HDMI input, and according to Atomos the Shinobi II has no built-in battery. Also check separately whether camera control works with your camera model.

FEELWORLD

The F6 PLUS V2 is a 6-inch HDMI option for anyone looking for a larger screen and a connection for a second monitor.

  • FEELWORLD specifies a 1920 × 1080 panel, a stated brightness of 450 cd/m², and HDMI input and output for the F6 PLUS V2.
  • FEELWORLD states that changes from firmware V7.x.x cannot be installed on older hardware. So, check the exact version.

Blackmagic Design

The Video Assist range is worth considering if you want to record on the monitor as well as watch the picture.

  • According to Blackmagic, the Video Assist 5” 3G has an SD card recorder and supports formats up to 1080p60.
  • Blackmagic distinguishes the 3G version from 12G HDR models, which support formats up to 2160p60. Don’t assume those features are available on the 3G version.

Lilliput

The A7s is a 7-inch HDMI alternative for anyone who values a larger picture.

  • According to Lilliput’s product specifications, the A7s has a 1920 × 1200 panel, a stated brightness of 500 cd/m² and HDMI loop-through.
  • Bear in mind how much room a 7-inch screen takes up in a shared workshop, and check that it will fit your set-up.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Can you also record the class with a camera monitor?

Only if the monitor has a recording function. According to Blackmagic, the Video Assist 5” 3G can record to an SD card and supports formats up to 1080p60; otherwise, check whether your camera can record the footage itself.

What should you test before participants sit down at the table?

Test your preferred camera settings to make sure the picture appears and that you can assess focus and framing from your workstation. If you want to use a second screen, check the output format too; Portkeys lists an HDMI output of up to 1080p60 for the PT6.

Do you need to buy a battery, cable or mount separately?

That depends on the version and what’s included with the offer. Atomos states that the Shinobi II has no built-in battery and can be powered using a compatible NP-F battery or USB-C PD. Check what’s in the box, your camera’s connections and the mount you’ll need.

Can you film other workshop users in a recognisable way and publish the class?

Not without first checking the relevant privacy rules. According to the Dutch Data Protection Authority, images of identifiable people are personal data; a legal basis under the GDPR is needed for images made or published for business purposes, for example, consent. Keep others out of shot or arrange an appropriate legal basis in advance; the exemption for private use does not automatically apply to a published class.

Is a CE mark an independent safety certification?

No. The Netherlands Enterprise Agency describes CE as a conformity marking through which the manufacturer declares that the product meets the relevant EU requirements, not as a quality mark or safety guarantee. The requirements that apply depend on the product and version.