Who is a camera monitor for calligraphy suitable for?

Filming fine pen strokes

You want to check that the letters, nib and paper stay sharp and well lit in a top-down shot. Magnification, peaking and exposure aids can help you monitor the image while you record.

Filming with a camera you already own

You’ll first want to check that your camera output, cable and chosen video format work with the monitor’s HDMI input. Support for an HDMI format alone doesn’t confirm which signal your camera outputs.

Filming in a limited workspace

You want to position and power the screen without the monitor, mount and cables getting in the way of your writing surface.

What should you look for in a camera monitor?

Check your camera’s output and video signal first. Then choose a screen and tools suited to the details you want to see while writing, the space available and the lighting in your filming area.

Compact HDMI monitor

A good fit if: your camera outputs a supported HDMI signal and you mainly want to check framing, fine lines and focus.

Keep in mind: Portkeys specifies a maximum of 500 nits for the PT5 II; this isn’t a measurement of how easy it is to see in your space.

Monitor with a higher stated brightness

A good fit if: the monitor will be close to a bright window or you want to compare a larger preview image. FEELWORLD lists 1200 nits for the 6-inch FW568 PRO, while Atomos lists 1500 nits for the 5.2-inch Shinobi II.

Keep in mind: these are manufacturers’ specifications, not comparative measurements of reflections or a guarantee that the screen will be easy to see in your room.

Monitor with extra connections or wireless features

A good fit if: your workflow requires SDI or wireless image transmission. SmallHD lists HDMI and SDI for the Indie 5, while Hollyland positions the Mars M1 Enhanced as a monitor, transmitter and receiver.

Keep in mind: these features aren’t necessarily needed for a single fixed filming setup; SmallHD says that certain camera-control licences are sold separately.

What to consider What should you check? Who is this important for?
Fine lines and focus Check magnification, peaking and exposure aids on the exact model. These tools don’t replace setting up your camera correctly. I want to check the pen strokes and exposure on screen while I write. Around 30% of consumers prioritise checking fine details.
Camera and video signal Compare the camera output, connector, resolution and frame rate with the monitor input; check the cable too. I want to make sure my camera sends the right image to the monitor before I buy. For around 30% of consumers, connectivity and signal compatibility come first.
Positioning and power Check the mounting options, included mount, power input or battery type, and cable routing for the version you’ve chosen. I want to keep my writing surface clear and position and power the monitor appropriately. Around 20% of consumers prioritise positioning and power in a small space.
Visibility in light from a window Compare the stated brightness of the exact model and decide where the screen will sit in relation to the window. If light from a window affects my filming area, I want to know how I can position the screen and what brightness is specified. Around 20% of consumers rank visibility in window light as their main buying concern.

Which buying mistakes can you avoid?

  • Confusing a 4K input with a 4K screen

    A monitor may accept a 4K signal even if its built-in screen doesn’t display in 4K. Portkeys lists a panel resolution of 1920 × 1080 for the PT5 II, with an HDMI input supporting up to 4K UHD 30p.

    Check the panel resolution and supported HDMI input format separately.

  • Overlooking power and mounting

    According to Atomos, the Shinobi II doesn’t have a built-in battery. The power supply and included accessories may vary by model and version.

    Compare what’s included in the set you’ve chosen with the batteries, cables and mounts you already have.

    If your chosen set doesn’t include a suitable battery, power solution, cable or mount, you may need to arrange these separately.

  • Assuming a brightness figure guarantees good visibility by a window

    Stated nit levels for different models don’t measure reflections where you’ll be filming.

    First decide where the monitor will go, then compare the brightness specifications for the exact models.

Which brands are worth comparing?

Portkeys

Worth considering if you’re looking for a compact HDMI monitor with image-checking tools.

  • Portkeys lists a 5-inch screen with a maximum brightness of 500 nits for the PT5 II, along with features such as peaking and waveform.
  • The PT6 is a separate 5.2-inch model with a maximum brightness of 600 nits. Don’t mix up the specifications or versions; stated brightness isn’t a measure of readability in your room.

FEELWORLD

The FW568 PRO is worth comparing if you want a larger screen and a higher stated brightness.

  • For this model, FEELWORLD lists a 6-inch screen, 1200 nits, HDMI signals up to 4K 60 Hz and a 9:16 frame marker.
  • These are manufacturers’ specifications, not independent measurements of readability or colour accuracy.

Atomos

The Shinobi II is worth comparing if you’re looking for a compact monitor with higher stated brightness and image aids.

  • Atomos lists 1500 nits, focus peaking and an HDMI input supporting up to 4K 30p.
  • This model doesn’t have a built-in battery. USB-C camera control depends on the camera model.

SmallHD

The Indie 5 is worth considering if you need SDI as well as HDMI, or a specific production setup.

  • SmallHD lists HDMI and SDI, and a brightness of 1000 nits for this model.
  • SmallHD says certain camera-control licences are sold separately; extra features aren’t necessarily needed for a single fixed filming setup.

Hollyland

The Mars M1 Enhanced is worth considering if you need wireless image transmission as well as local monitoring.

  • Hollyland positions this model as a monitor, transmitter and receiver in one.
  • The stated wireless range and latency are manufacturer claims and don’t guarantee performance in a particular student room.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I connect an external camera monitor to my camera?

It depends on your camera’s video output, connector, and set resolution and frame rate. Compare these details with the HDMI input formats of the exact monitor model, then choose a suitable cable. Without knowing the camera model, it isn’t possible to confirm the combination for certain.

How do I position and power the monitor during a long recording?

First, check that the mount leaves your top-down view and writing area clear. Atomos says the Shinobi II has no built-in battery and is powered by a compatible NP-F/L-series battery or USB-C PD; for the PT5 II, Portkeys lists support for NP-F and LP-E6 batteries, among others. Also check which accessories are included with the version you’ve chosen.

What are my rights if a monitor I bought online doesn’t work properly?

When you buy from a business online in the Netherlands, you generally have a 14-day cooling-off period, subject to conditions and exceptions. According to the Dutch government, you’re also entitled to a product that works as it should; there’s no fixed statutory guarantee period in the Netherlands. If a product is faulty, the seller is responsible for providing a solution.

Can I post my calligraphy video online if other people appear in it?

Sharing a video publicly raises more privacy considerations than recording your own work for personal or household use. The Dutch Data Protection Authority says the GDPR generally doesn’t apply to personal recordings for household use, but may become relevant when footage is made available to an unrestricted audience. Where possible, point the camera at the paper and your hands. If other people are recognisable, check which privacy and consent rules apply.