Art teacher with limited desk space
Wants to see the live image without having to move the paper, hands or lamp. The screen size, mounting point and cable route determine whether an extra monitor will fit neatly into the setup.
Start by looking at the free space beside and above the paper. A compact HDMI monitor is often more practical when the screen, arm and cables must stay clear of the drawing area. Next, choose the image tools you need to assess lines and lighting, and check that the signal, mounting and power supply are compatible with your camera. A higher stated brightness can help in strong daylight, but it isn’t always necessary when indoor lighting is manageable.
Wants to see the live image without having to move the paper, hands or lamp. The screen size, mounting point and cable route determine whether an extra monitor will fit neatly into the setup.
Wants to check while filming that pencil lines remain sharp and light paper is clearly visible. Panel resolution and focus and exposure tools are therefore important considerations.
Wants to view the image on an accessible screen and needs to check that the camera outputs the required HDMI signal. Monitor-based control also depends on the specific camera model and the functions it supports.
Choose this if: you mainly want to check the framing and drawing, and have little room for a screen and arm.
Bear in mind: the Portkeys PT5 II has a stated maximum brightness of 500 nits; compare this with the light levels in your workspace.
Choose this if: daylight makes the screen difficult to read and a screen of around 5.5 inches will fit your setup. Osee states that the Lilmon 5 has a brightness of 1000 nits, while FEELWORLD gives the F5 PROX a rating of 1600 nits.
Bear in mind: these are manufacturer specifications, not measurements taken in your room. Screen angle, reflections, power and mounting still matter.
Choose this if: controlling the camera from a screen would be useful while it is mounted above your artwork.
Bear in mind: the Atomos Shinobi II’s controls work only with supported cameras and functions. Check the exact model and firmware.
Choose this if: you sit further away from the setup, want someone else to view the image with you, or can already assess it clearly on the camera screen.
Bear in mind: a larger external screen takes up more room. With an external monitor, also check that the camera outputs the required signal.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Space and mounting | Measure the available space and check the screen size, mounting points, arm position and cable route. | If I want to keep the screen and cables away from the paper, hands and lamp, I focus mainly on the mounting. Around 31% of consumers give space and mounting their highest priority. |
| Lines and lighting | Compare the panel resolution and available focus or exposure tools. Also assess daylight and reflections where you plan to place the screen. | When I want to check fine lines and light paper while filming, I look at the panel detail and image tools. Around 25% of consumers put this check first. |
| Signal and control | Check your camera’s HDMI output and compare its resolution and frame rate with the monitor’s input. Check camera control for each model and function. | If I first want to make sure my camera outputs a suitable image signal, I check the connection and settings. Around 25% of consumers say compatibility is their main concern when buying. |
| Power and accessories | Check the power connection and compatible battery for the exact version, as well as what’s included for cables and mounting. | When I want to film a lesson without adjusting the setup part-way through, I need to know which power supply and accessories are required. Around 19% of consumers prioritise a complete, ready-to-use setup. |
A monitor can accept a 4K signal and still have a Full HD panel. When checking fine pencil lines, signal support and panel detail are two different things.
Check the supported input formats and panel resolution separately, and see which focus magnification or peaking tools are available.
A stated brightness rating alone doesn’t tell you how easy the screen will be to see on your desk. Screen angle, daylight and reflections matter too.
First decide where the screen will go, then compare its stated brightness with the lighting at that spot.
Viewing an image over HDMI isn’t the same as controlling the camera. Functions such as touch-to-focus depend on the camera models and functions supported.
Before buying, check that your exact camera, firmware and chosen controls are supported.
Without a suitable power supply and a practical place to mount it, the monitor may not work well in your lesson setup. Accessories can vary by model and version.
Check the contents list for the exact version and make a list in advance of the battery or power supply, cable and arm that will work with your camera and desk.
Depending on the version, your setup may also need a separate battery or power supply, cable or mounting arm.
The PT5 II is a 5-inch HDMI monitor for anyone looking for a compact screen to check their image.
According to the manufacturer, the Lilmon 5 combines a 5.5-inch screen with several mounting positions.
The F5 PROX is a 5.5-inch HDMI monitor worth comparing if stated brightness and exposure tools are important to you.
The Shinobi II is a compact monitor for anyone who may want to use supported camera controls as well as check the image.
Not necessarily, if you just want to check the framing and focus. Distinguish between the HDMI resolution a monitor accepts and the resolution of its own panel: according to Portkeys, the Portkeys PT5 II accepts formats including UHD 4K up to 30p, but has a 1920 × 1080 panel. Check that the monitor supports your chosen camera setting.
First check that your camera has a suitable HDMI output and that you can turn off the information display for that output. Canon describes this setting for specific HDMI streaming setups, but don’t assume that every camera has the same menu option. Use a cable that fits the connections on your camera and monitor.
No. An HDMI video connection doesn’t confirm that camera control will work. Atomos separately lists the camera brands and models that support touch-to-focus with the Shinobi II. Check support for your camera model, firmware, cable and chosen function.
Compare the power connection and compatible battery for the exact monitor version with the accessories actually included. Also check the HDMI cable and mounting. Portkeys lists power options and version details for the PT5 II; don’t assume that this information applies to other models.
Online consumer purchases generally come with a 14-day cooling-off period, although exceptions depend on the purchase and the type of seller. The Dutch government also states that there is no fixed statutory warranty period in the Netherlands. If a product isn’t as it should be, contact the seller for a suitable solution; a manufacturer’s warranty doesn’t replace this.