Who is this camera setup for?

Online shop seller of small circuit boards

You want components and markings to be clearly recognisable in your photos. Compare the shot you want with the magnification offered by the exact camera and lens combination; a standard zoom and a macro lens aren’t interchangeable.

Seller with lots of product variations

You regularly take both overview and detail shots, and want consistent framing across your products. A fixed setup helps you adjust composition and lighting without having to start from scratch each time.

New to taking photos for an online shop

You want to get started with just a few camera accessories. Do check that the close-up mode on your chosen camera can capture both the smallest details you need and the whole circuit board at a suitable size.

What should you consider when choosing?

Compact camera with close-up mode

Choose this if: you regularly want to photograph details without changing lenses, and the fixed lens can capture the shots you need.

Bear in mind: OM SYSTEM lists a focusing distance from 1 cm for the microscope mode on the Tough TG-7. That distance alone doesn’t prove it can capture both the whole board and small markings well.

Mirrorless camera with standard zoom

Choose this if: overview shots are your priority and you want the option to use a different lens later.

Bear in mind: the Canon EOS R50 supports RF and RF-S lenses. The RF-S 18-45mm offers different magnifications depending on focal length and focusing mode, so don’t assume the standard zoom is a complete macro setup without checking first.

Mirrorless camera with macro lens

Choose this if: small components and markings determine how much magnification you need.

Bear in mind: check the mount, working space and complete setup. Canon lists a maximum magnification of 1.4× for the RF 100mm F2.8L Macro IS USM; Nikon and Sony describe the Z and E lenses mentioned here respectively as 1:1 macro lenses.

What to consider What should you look for? Who should pay particular attention to this?
Legibility of details Compare the smallest shot you need with the magnification offered by the exact lens or close-up mode. Assess a test image at the size at which customers will view the photo. When I photograph small circuit boards, I want the smallest markings to remain legible without losing sight of the whole board. Around 33% of consumers prioritise legible component details.
Consistent framing Check that the whole board fits within your working space and that you can keep the camera in a fixed position while adjusting the framing and lighting. When I’m working with several product variations, I want to be able to take overview and detail shots with consistent framing. Around 27% of consumers prioritise a repeatable workflow.
Depth of field and lighting Check whether the components you want to photograph can all be in focus at the same time, whether your chosen camera supports focus bracketing, and whether there’s room for lighting without casting a shadow over the board. When components sit at different heights, I want enough depth of field and room to light them properly. Around 27% of consumers focus mainly on depth of field and manageable lighting.
Simple setup Check what’s included with the exact version, and take both an overview and a detail shot using the same setup. When I’m getting started, I’d rather not have to put together a set of separate camera accessories straight away. Around 13% of consumers prefer a simple, complete setup.

Which buying mistakes can you avoid?

  • Assuming a mirrorless camera with a kit zoom is a complete macro setup

    The maximum magnification of the Canon RF-S 18-45mm differs from that of the dedicated RF 100mm macro lens.

    Before buying, check which lens is included with the exact version and compare its magnification with the detail shot you need.

  • Choosing based only on the minimum focusing distance

    A short focusing distance on its own doesn’t tell you how much of a detail will appear in the shot or how much room will be left for lighting.

    With your chosen settings, take both a photo of the whole circuit board and a close-up of the smallest marking you need to capture.

  • Assuming a macro lens will automatically keep the whole circuit board in focus

    Depth of field can be limited when shooting close up. Focus stacking combines several shots taken at different focus points, but requires a suitable shooting and editing workflow.

    Decide in advance whether a single shot will be enough, and check that your camera and workflow support multiple focus points.

  • Assuming consumer rights automatically apply to a business purchase

    According to ACM ConsuWijzer, consumer protection doesn’t automatically apply when an agreement is used mainly or exclusively for business purposes.

    Before placing your order, check whose name you’re buying under and how the product will be used, then review the terms and conditions that apply to your purchase.

Which camera brands are worth considering?

OM SYSTEM

The Tough TG-7 offers a compact camera option with built-in close-up capabilities. OM SYSTEM describes the microscope mode for this model.

  • OM SYSTEM lists a focusing distance from 1 cm for microscope mode.
  • Use a test shot to check whether the fixed lens can cover both the whole circuit board and the detail shot you need. The light guide is included with a specific TG-7 kit.

Canon

The EOS R50 is an RF/RF-S mirrorless camera body that can be paired with a range of compatible lenses.

  • Canon lists focus bracketing for the EOS R50 and a maximum magnification of 1.4× for the separate RF 100mm F2.8L Macro IS USM lens.
  • The RF-S 18-45mm standard zoom has different magnification values depending on the mode. Assess the complete combination rather than the camera body alone.

Nikon

The NIKKOR Z MC 105mm f/2.8 VR S lens is a macro option for a compatible Nikon Z body.

  • Nikon describes this specific lens as a 1:1 macro lens.
  • A lens on its own doesn’t make a complete camera setup; check the camera body, available working space and any additional accessories you’ll need.

Sony

The FE 90mm F2.8 Macro G OSS offers a macro option for a compatible E-mount camera.

  • Sony specifies a magnification of up to 1:1 for this lens.
  • This specification applies to the lens mentioned here and doesn’t automatically tell you about the close-up capabilities of another Sony lens.

Products on Joybuy

Related products will be available soon.

Frequently asked questions

Is a short minimum focusing distance enough to photograph small markings clearly?

No, not as your only measure. Compare the shot you need with the magnification offered by the exact lens and settings you’ll use. Canon UK lists different maximum magnifications for the RF-S 18-45mm depending on focal length and focusing mode. If possible, take a test shot at the size at which customers will view the photo.

How can I get components at different heights in focus?

Keep the circuit board and camera still, then first check whether a single shot gives you enough depth of field. If it doesn’t, you can use a compatible camera to take shots at different focus points and combine them into an image with greater depth of field. Canon lists focus bracketing for the EOS R50.

Which extra accessories and terms should I check when buying for my online shop?

Check what’s included with the exact kit, whether you’ll need a macro lens or equipment for mounting and lighting, and which terms and conditions apply to your purchase. ACM ConsuWijzer distinguishes between an agreement used mainly or exclusively for business purposes and a purchase covered by consumer rules, so don’t assume consumer protection applies automatically.

Can I use photos of other people’s circuit boards in my Dutch online shop?

According to the Dutch government, you need permission from the creator to publish other people’s copyright-protected photos. Before publishing a photo, check that you have permission to use it.