Who is this advice for?

Photographing the whole cheese board

You want to capture the entire arrangement from above or at an angle, and you’re thinking about framing, the space around the table and the window light. Canon Europe and Canon Nederland Store point out that the direction of the window and the conditions outside affect the light.

Photographing cheese details

You want to capture small textures individually, large and in sharp focus. The capabilities of the specific lens, including its minimum focusing distance and magnification, are key.

Photographing in changing daylight

You take photos as the light from the window changes and want to weigh up how much of the board should be in focus, what kind of support would be useful and whether you need a different lens.

What should you look for?

First decide whether you mainly want to photograph the whole board or small details. Then consider how the window light and the space available will affect your setup.

What to consider What to look for Who is this for?
Fitting the whole board into the frame Check which lens is included and whether you can frame the full arrangement from the available spot above or beside the table. If I want to show the whole board, I focus on the angle of view and the space available for positioning the camera. Around 36% of consumers put an overall shot first.
Capturing small details Compare the minimum focusing distance and maximum magnification of the specific lens. For the Canon RF-S 18-45mm, Canon lists 0.20 m at 18 mm and 0.35 m at 45 mm; the maximum magnification is 0.14× and 0.16× respectively when using autofocus. If you want to fill the frame with a rind or garnish, check whether the lens can focus close enough and whether its magnification suits the level of detail you want. Around 29% of consumers prioritise close-ups.
Changing window light According to Canon Europe, the direction of the window, the time of day and the weather all affect the light. Decide how much of the board should be in focus and whether you can set up a tripod; a narrower aperture can give you more depth of field. If the light changes while I’m taking photos, I want to know which support and settings will suit the depth of field I’m after. Around 21% of consumers prioritise changing light.
A complete, straightforward setup Check whether you’re buying a camera body or a kit, and which lens is actually included. A compact camera has a fixed lens; with a mirrorless camera, you can change lenses, according to the Consumers’ Association. If you want to start with one straightforward setup, check what’s in the box beforehand and whether the lens suits the photos you want to take. Around 14% of consumers prioritise simplicity.

Common buying mistakes

  • Comparing camera bodies alone

    Whether you’re taking an overall shot or a close-up, the lens partly determines the framing and minimum focusing distance available to you.

    Compare the complete camera-and-lens combination and check which lens is included in the box.

    If the kit lens can’t focus close enough to capture the details you want, you may need to buy a suitable additional lens later.

  • Assuming a long zoom or lots of megapixels means macro capability

    Minimum focusing distance and magnification are different specifications. A long zoom or high resolution alone won’t tell you how large a small detail will appear in the frame.

    Check the minimum focusing distance and maximum magnification for the specific lens. If you’re buying an additional lens, make sure its mount is compatible too.

    You may need an additional close-up lens if the details you want still appear too small with your chosen lens.

  • Confusing stabilisation with greater depth of field

    Stabilisation helps reduce camera shake, but it doesn’t increase the area in focus. For a whole board, you may need a narrower aperture.

    First decide how much of the arrangement should be in focus. Then choose your settings, support and, if necessary, a different lens.

    A tripod can be useful for overhead shots or in low light. Also allow extra time to set up when the window light is changing.

Brands and specific cameras to consider

Canon

The EOS R50 with RF-S 18-45mm is a specific kit that pairs a mirrorless camera with a standard zoom lens, making it a good starting point.

  • Canon lists different minimum focusing distances and magnifications for the RF-S 18-45mm at different zoom settings. These specifications can help you assess whether it will capture the details you want.
  • According to Canon, the EOS R50 doesn’t have sensor-shift stabilisation. The kit zoom isn’t a macro lens, and its specifications don’t guarantee that every detail of the cheese will fill the frame.

Nikon

The Z50II with NIKKOR Z DX 16-50mm f/3.5-6.3 VR is a standard zoom kit for overall shots and everyday details.

  • Nikon lists a minimum focusing distance of 0.2 m for this lens, which also has built-in vibration reduction.
  • According to Nikon, the maximum aperture ranges from f/3.5 to f/6.3 across the zoom range. This is the 16-50mm f/3.5-6.3 VR kit, not Nikon’s separate 16-50mm f/2.8 VR.

Fujifilm

The X-S20 is a camera body to consider if you want to choose a suitable X-mount lens yourself.

  • Fujifilm specifies five-axis in-body image stabilisation of up to 7.0 stops under its own test conditions.
  • This specification doesn’t mean you’ll see an advantage in every photo of a stationary cheese board. Your chosen lens also affects the angle of view and close-up capabilities.

Sony

Sony offers both the ZV-E10, which takes interchangeable E-mount lenses, and the ZV-1 II, which has a fixed lens.

  • Sony lists an APS-C sensor with approximately 24.2 effective megapixels for the ZV-E10K.
  • Sony positions the compact ZV-1 II for content creation on the go. That doesn’t mean its vlogging features are automatically important for still-life photography.

Products related to this topic

Related products will be available soon.

Frequently asked questions

Is a fast lens always better for photographing a whole cheese board?

No. A wider aperture can help when the light from the window fades, but it means a smaller part of a three-dimensional arrangement will be in focus at once. If you want the whole board in focus, try a narrower aperture and use a stable setup if needed.

How can I soften window light without buying a new camera?

Move the board or take your photos at a different time. According to the food photographer quoted by Canon Europe, a thin white curtain can soften direct sunlight; the result will depend on the window and the weather.

What should I check when buying a lens kit?

Check exactly which lens is in the box and its minimum focusing distance at the zoom setting you want to use. Canon Europe says a tripod can be useful for overhead shots, in low light or for extreme close-ups.

Who can help me in the Netherlands if my camera is faulty?

According to the Dutch government, the seller must provide a solution if a product is faulty. There isn’t simply a fixed statutory warranty period of two years; what you could reasonably expect from the product also matters.

Can I return a camera bought online if it isn’t right for how I’ll use it?

According to ACM ConsuWijzer, when you buy online as a consumer, you generally have a statutory cooling-off period of up to 14 days after delivery. Check the terms and any exceptions that apply to your purchase.