Who is this guide for?

Photographer with one SD card

You want to import photos from an SD card without unnecessary slots or cables cluttering a small desk. The card interface and computer port determine which compact reader is right for you.

Photographer with large photo collections

You regularly import lots of files from UHS-II SD cards, so you look beyond the setup and check the interfaces supported by the card, reader and computer.

Photographer with different card types

You use SD alongside another camera card format and check whether the extra slot is specifically for CFexpress Type A, Type B or CompactFlash.

What should you look for?

First, check your card format and computer connection. Then compare how the reader will fit on your desk, along with any speed or handling features that suit the way you import photos.

What to consider What should you check? Who should pay particular attention?
The right card slot Compare the card type shown on your camera card with the formats supported by the exact reader model, such as SD, microSD, CompactFlash or CFexpress Type A or Type B. If you use just one particular camera card, you’ll want to make sure it fits the reader. Around 36% of consumers prioritise compatibility.
Connection and positioning Check whether your computer uses USB-C or USB-A, and make sure the cable or plug won’t obstruct the available space or ports on your desk. On a small desk, you’ll want to connect the reader without loose cables or awkward positioning. Around 29% of consumers prioritise a compact setup.
Import speed Compare the UHS version supported by the card and reader, and take the computer connection into account too. Stated maximum speeds depend on the card and equipment used. If you regularly import large photo collections, you’ll want to know whether the card, reader and computer all support the interface you need. Around 21% of consumers prioritise import speed.
Monitoring transfers Check whether the exact model has an activity light or write-protect feature, and find out how your computer safely ejects removable hardware. You’ll want to see what the reader is doing during a transfer and only remove the card when it’s finished. Around 14% of consumers prioritise careful importing.

Common pitfalls

  • Assuming CFexpress Type A and Type B are the same

    The Sony MRW-G2 is specified for CFexpress Type A and SD, while the OWC Atlas Dual supports CFexpress Type B and SD. These card slots are not interchangeable.

    Check the full card type printed on your camera card and compare it with the specifications for the exact reader model.

    If your card doesn’t fit the reader you’ve chosen, you may need a different reader that supports that card type.

  • Assuming USB-C or a high USB speed guarantees fast imports

    The connection alone doesn’t tell you which memory cards the reader accepts or what speed the whole setup will achieve. The USB Implementers Forum explains that a USB connection runs at the lowest common speed. The SD Association also distinguishes between the bus speeds of SD cards.

    Check the card interface, the reader specifications and the computer connection. Treat manufacturers’ stated speeds as maximums that come with specific conditions.

  • Removing the card as soon as the copy window disappears

    A window disappearing doesn’t in itself confirm that your import is complete. Kingston advises against removing a card from its Workflow Station while the activity light is flashing; Microsoft recommends safely ejecting removable hardware.

    Check the copied photos and use your operating system’s safe eject option before removing the card.

Brands to consider

Lexar

The Professional USB-C Dual-Slot Reader is designed for SD and microSD cards, including UHS-II, and has a built-in USB-C cable.

  • Lexar lists an activity light and a maximum read speed of up to 312 MB/s for UHS-II. Actual results depend on the card and system, according to Lexar.
  • The stated card slots are for SD and microSD. Check separately whether you need a reader for a different card format.

UGREEN

The 50706 card reader we looked at combines SD and microSD slots with USB-C and USB-A connections.

  • UGREEN states that both card slots can be accessed simultaneously and that the reader supports UHS-I.
  • This model’s product specifications don’t substantiate UHS-II speeds, so don’t base your choice on that.

SanDisk

The ImageMate PRO USB-C SDDR-A631-ANGNN is described as a multi-card reader for SD, microSD and CompactFlash.

  • SanDisk lists UHS-II and maximum speeds of up to 312 MB/s for SD and microSD. These are manufacturer specifications that depend on the card and host device.
  • The CompactFlash slot is useful if you use that card format; CFexpress is not listed as supported.

Sony

According to Sony Netherlands, the MRW-G2 combines a slot for CFexpress Type A with support for UHS-II and UHS-I SD cards.

  • Sony lists USB-C and USB-A cables as included.
  • The stated card slot is for Type A; don’t assume this reader supports CFexpress Type B.

OWC

According to OWC, the Atlas Dual CFexpress + SD Reader combines CFexpress Type B with SDXC UHS-II and has an integrated, retractable cable.

  • OWC lists separate activity lights and a write-protect switch.
  • The stated slots don’t indicate support for CFexpress Type A. The speed is a manufacturer specification, not an independent measurement for your card and computer.

Card readers and hubs at Joybuy

These product picks are aimed at importing photos from SD or TF cards using a USB-C reader or hub. Before buying, check which card format and connection work with your camera and computer.

Acer ODK6V0 7-in-1 USB-C hub with SD and TF card reader

Acer ODK6V0 7-in-1 USB-C Hub

An option if you’re looking for a USB-C hub as well as a card reader. Check that the card slots are compatible with your camera’s card.

The product name lists an SD and TF card reader, HDMI up to 4K@30Hz, 100W PD charging and 3 USB 3.0 ports at 5Gbps.

View at Joybuy
Kingston Technology USB3.2 Gen1 Workflow dual-slot SDHC/SDXC UHS-II card reader

Kingston Technology USB3.2 Gen1 Workflow Dual-Slot SDHC/SDXC UHS-II Card Reader

An option to compare if your camera uses SDHC or SDXC cards and you’re looking for a reader with two slots.

The product name lists SDHC/SDXC, UHS-II and USB3.2 Gen1.

View at Joybuy
Verbatim CMH-13 USB Type-C hub

Verbatim CMH-13 USB Type-C Hub

A USB Type-C hub could be a good fit if you need other connections on your desk too. Before choosing, check which card formats and slots the model supports.

The product name lists USB Type-C and 10000 Mbit/s.

View at Joybuy

Frequently asked questions

Is USB-C enough to read my camera card?

No. USB-C describes the connection to your computer, not the card format supported by the reader. Compare the markings on your card with the formats listed for the exact reader model.

How do I safely remove the reader from a Windows computer?

Wait until the transfer is complete, then use ‘Safely Remove Hardware and Eject Media’ in Windows 10 or 11 before disconnecting the reader. Microsoft recommends safely ejecting removable hardware. Check the copied photos before erasing your camera card.

Is the stated speed in MB/s the speed I’ll actually import at?

No. A stated maximum doesn’t guarantee your import speed. The SD Association describes different SD bus speeds, while the USB Implementers Forum explains that a USB connection runs at the lowest common speed. Manufacturer specifications may also depend on the card and system.

What warranty and cooling-off period apply to online purchases as a consumer in the Netherlands?

According to the Dutch Government, you’re entitled to a product that works as it should. There’s no fixed statutory warranty period in the Netherlands, and the seller is your point of contact if there’s a problem. For distance purchases from a business, a 14-day cooling-off period applies in many cases. Check whether your purchase is covered by the rules and whether any exceptions apply.