Who is this for?

Creator filming from above

You film your writing hand in motion and want to keep the nib visible, so the direction of the light and shadows matter. Ulanzi recommends diffused light on either side of the work surface.

Creator producing colour-critical portfolio work

You want paper and coloured ink to look consistent between shots. An adjustable white-light setting and the stated colour-rendering performance can help you compare results, but you’ll still need to take a test shot.

Creator with a small or changing workspace

You need to be able to position the light away from the writing area or take it with you. Check that the clamp or stand will fit, and how the light is powered.

What should you look for when buying?

Adjustable desk panel

Best for: a permanent, compact workspace where you can direct the light beside the paper. Elgato says the Key Light Air MK.2 clamps onto desks up to 6 cm thick.

Bear in mind: a single panel can still cast a hand shadow. Elgato also notes that maximum light output depends on the power supply.

COB light with a light modifier

Best for: a larger workspace where you need more freedom to position the light and have room for a stand and a suitable diffuser.

Bear in mind: according to the manufacturer, the amaran 100x S has a Bowens mount. Its stated output of 30.500 lux applies at 1 metre with the Hyper-Reflector at 5600 K; it won’t necessarily give the same result on your paper with a diffuser.

Compact battery-powered light for fill

Best for: a portable setup or brightening a darker side of the paper. Ulanzi lists a 2000 mAh battery for the VL49 RGB.

Bear in mind: don’t assume a small light will illuminate the entire writing area evenly. The VL49 RGB and VL49 without RGB have different specifications.

What to consider What should you check? Who is this important for?
Nib free from hand shadows Room to position a light beside the paper, diffusion and, if needed, a second light source. Take a test shot while writing. When I film from above, I want to make sure my hand doesn’t cover the nib; around 29% of consumers prioritise avoiding hand shadows.
Colour of the paper and ink Adjustable colour temperature, the CRI or TLCI rating for the exact model, and a test shot using the same camera settings. For my portfolio, I want the paper and ink to look consistent under similar lighting. Around 24% of consumers prioritise colour consistency above all else.
Banding in the footage Test the camera, shutter setting and dimming level together. Canon describes banding with some LED light sources when used with an electronic shutter. When I want smooth-looking footage, I test the combination I’ll use to film the lesson; around 18% of consumers prioritise flicker-free video.
Mounting and writing space Compare your desk thickness with the clamp’s maximum thickness, and check the reach, available space and stability out of shot. In my small workspace, the light needs to be secure without getting in the way of the paper or my hand; around 17% of consumers prioritise mounting and workspace above all else.
Portability and necessary accessories Check the power source and battery life at your preferred brightness, and whether an adapter, stand and diffuser are included. When I film in different places, I want to know how to power and carry the light, and what else I’ll need; around 12% of consumers prioritise portability and accessories.

Common buying mistakes

  • Choosing the brightest light just to avoid hand shadows

    More brightness won’t change where your hand’s shadow falls. When filming from above, it can still cover the active stroke or nib.

    First, test the direction of the light as you write normally. Then decide how much light you need.

  • Assuming a COB light’s lux rating tells you how much light reaches the paper

    The stated maximum lux for the amaran 100x S applies at 1 metre with the Hyper-Reflector at 5600 K. A different distance or diffuser won’t necessarily give the same result on your writing surface.

    Check the measurement conditions, and separately confirm which light modifier and mount are included in the offer.

  • Treating the VL49 and VL49 RGB as the same model

    Ulanzi describes the VL49 without RGB as having a fixed 5500 K light, while the VL49 RGB has different light settings and RGB functions.

    Before buying, compare the full variant name and specifications for the exact model.

Relevant brands to consider

Elgato

Desk lights for a compact filming space. The Key Light Air MK.2 is one example, with a desk clamp and adjustable white light.

  • Elgato lists a range of 2900–7000 K, a CRI above 94 and a clamp for desks up to 6 cm thick for the Key Light Air MK.2.
  • Maximum light output depends on the power supply. Check that the clamp fits and that you can position the light beside the paper.

amaran

COB lighting for a workspace with room for a separately positioned light and a suitable modifier. The 100x S is the model discussed here.

  • According to the manufacturer, the 100x S has a Bowens mount, a colour temperature range of 2700–6500 K and CRI 95+.
  • The stated 30.500 lux was measured at 1 metre with the Hyper-Reflector at 5600 K. This is not a measurement of diffused light on your paper.

Godox

Video panels for creators looking for a larger light source. The P260C Pro is the model discussed here.

  • Godox lists CRI/TLCI 98+ for the P260C Pro and provides an EU declaration of conformity for this specific model.
  • These are manufacturer specifications, not independent measurements. Check the full model name and the information about the included mount when considering an offer.

Ulanzi

Compact lights for local fill or portable filming. The VL49 RGB is the model discussed here.

  • Ulanzi lists a 2000 mAh battery, magnetic mounting and a 1/4-inch screw hole for the VL49 RGB.
  • The VL49 RGB has different specifications from the VL49 without RGB. Don’t assume a compact light will cover the entire writing area without testing it first.

Video lights at Joybuy

This selection includes compact and portable video lights, a phone ring light and models for local fill. When filming calligraphy, test whether the light reaches the entire writing area without causing distracting shadows or reflections. According to the Netherlands Food and Consumer Product Safety Authority, electrical consumer products covered by the relevant rules must carry a CE marking. Check the information for the exact model on offer.

Ulanzi VL81 Rechargeable LED Video Light Black

Ulanzi VL81 Rechargeable LED Video Light Black

If you’re looking for a rechargeable video light, take a test shot to check whether its position illuminates the writing area evenly.

The product name describes a rechargeable LED video light for cameras.

View at Joybuy
Ulanzi VL49 RGB video light with 2000 mAh battery

Ulanzi VL49 RGB Video Light, 2000 mAh, 2500K–9500K

The compact design and rear magnet may suit a portable setup. Test whether the light gives enough coverage for the entire writing area.

The product name lists dimming, a range of 2500 K–9500 K and a 2000 mAh battery.

View at Joybuy
Ulanzi 4-inch phone ring light

Ulanzi 4-inch Phone Ring Light, 3000K–7000K

If you’re filming with a phone, a ring light may be worth trying. Check that its position doesn’t cause reflections in the ink.

The product name lists three colour temperatures, a range of 3000 K–7000 K and five brightness levels.

View at Joybuy
Ulanzi LM001 compact magnetic fill light, 500 mAh

Ulanzi LM001 Portable Mini Fill Light, 500 mAh

A compact fill light may suit you if you want to brighten a darker area locally. Take a test shot to check that the light doesn’t reflect directly off the ink.

The product name lists magnetic mounting and a 500 mAh battery.

View at Joybuy
Ulanzi LM07 LED video light, 2000K–5500K, 2000 mAh

Ulanzi LM07 LED Video Light, 2000K–5500K, 2000 mAh

If you’re looking for a portable light with an adjustable beam, take a test shot to check that it reaches the part of the paper you want to illuminate.

The product name lists bi-colour lighting, four brightness levels, a 2000 mAh battery, a weight of 187 g and an adjustable beam.

View at Joybuy

Frequently asked questions

How should you position the light so your writing hand doesn’t hide the nib?

Start with diffused light beside the writing area and film a normal writing movement. Ulanzi recommends placing lights on either side of the work surface; a softer second light can fill in shadows. Move the lights if reflections or shadows cover the active stroke.

Is a high CRI enough to show ink colours accurately?

No. A CRI rating alone doesn’t guarantee how the ink will look in your footage. Also assess a test shot using your own paper, ink and camera, with your chosen white-light setting.

What should you do if bands appear in your video?

Try a different combination of light dimming level and camera settings before filming the lesson. Canon describes banding with some LED light sources when used with an electronic shutter. A colour-rendering specification doesn’t prove that your footage will be free of banding.

What extra costs or rights should you be aware of when buying online in the Netherlands?

Check whether the required power supply, mount and diffuser are included. According to ACM ConsuWijzer, online consumer purchases generally come with a statutory cooling-off period of up to 14 days after delivery, subject to exceptions. Your statutory guarantee is separate from any manufacturer’s warranty.

Which product safety rule applies to an electric video light in the Netherlands?

According to the Netherlands Food and Consumer Product Safety Authority, electrical consumer products covered by the relevant rules must carry a CE marking. Check the marking and product information for the exact model on offer; a brand name or declaration for a different model doesn’t confirm this.