Start with light coming in from the side of a window, if it’s bright enough and suitable at the time you want to take photos. If you’d rather not depend so much on the time of day or the weather, choose a complete lighting setup that fits beside your table, including its power supply and mount. Already have a suitable light? Check the connection first: a softbox on its own doesn’t produce light.
Which setup is right for you?
Bread photographer with limited table space
If you’re photographing a whole loaf or a cut slice on a small table, allow space for both the light modifier and the light and its mount. According to amaran, the Light Box 45x45 measures 45 × 45 × 34.5 cm when assembled; you’ll also need room for a stand.
Baker who takes photos at set times
If you want to take photos when the window light isn’t suitable, your own lighting setup can make you less dependent on the time of day and the weather. Adobe Lightroom Academy explains that studio lighting can be more consistent than working with changing daylight.
Creator with an existing studio light
If you already have a light, a separate softbox could be an option for shaping it. Check that the two parts connect: amaran, Godox and SmallRig specify Bowens mounts for the models described, while NEEWER specifies its own mount for the NS3P.
What should you consider when choosing?
Window light
Choose this when: the window gives you enough light when you’re taking photos, and you can position the table so the light comes from the side.
Bear in mind: the direction and strength of daylight change with the time of day and the weather.
Complete softbox light
Choose this when: you want to take photos even without suitable window light, and have room for the light modifier, light and a stable mount.
Bear in mind: the setup needs power and space. Check what’s included and the electrical specification of the set you choose.
Separate softbox
Choose this when: you already have a compatible light and only need a light modifier.
Bear in mind: a softbox isn’t a light. The mount must be compatible, and you’ll need to have or arrange a light source separately.
| What to consider |
What to look for when buying |
Who should consider this? |
| Space for the setup |
Compare the dimensions of the assembled light modifier, and allow extra room for the light and stand. |
I want to photograph bread on a small table without the light and mount getting in the way. Around 33% of consumers prioritise setup space and positioning. |
| Lighting at different times |
Check whether a light source is included and what adjustments the set allows. Also check its electrical specification. |
If I take photos at set times or when it’s dark, I don’t want to rely on the window alone. For around 25% of consumers, consistent lighting is the main consideration. |
| Mount |
Compare the softbox mount with that of the exact light model. The Bowens models mentioned aren’t necessarily compatible with a NEEWER mount. |
I already have a light and don’t want to buy a modifier that won’t fit it. Around 25% of consumers prioritise compatibility with their existing equipment. |
| Shadows and crust texture |
Check whether you can position the light at an angle beside the bread and whether a grid is included. Assess the result with a test shot. |
I want to bring out the texture of the crust, so I pay attention to the direction of the light and the shadows. Around 17% of consumers choose mainly based on control over how the light falls. |
Common buying mistakes
-
Assuming a separate softbox is a working light
The Bowens softboxes mentioned are light modifiers; their product descriptions don’t confirm that a light is included.
Before buying, check what’s in the box and whether your existing light fits the mount.
-
Confusing a compact softbox with a compact complete setup
The light modifier’s dimensions don’t tell you how much extra space the light and stand will take up.
Measure or mark out the full setup beside the table, not just the front of the softbox.
-
Assuming a European product page confirms the correct electrical specification for the Netherlands
The described set contents alone don’t confirm which mains power supply and plug will be supplied with an order in the Netherlands.
Before buying, check the exact light and power supply specification, along with the relevant product information.
Brands and models to consider
amaran
Separate Bowens light modifiers, including the Light Box 45x45 for product photography and close-up setups.
- According to amaran, the Light Box 45x45 has inner and outer diffusion as well as a grid; when assembled, it measures 45 × 45 × 34.5 cm.
- It isn’t a complete light. Check the light source, mount and stand separately.
Godox
Bowens softboxes, including the rectangular SB-FW6060.
- Godox lists a Bowens ring and grid for the SB-FW6060; the softbox measures 60 × 60 cm.
- This measurement is for the softbox, not the space needed for a light or stand. A light source isn’t confirmed as part of this model.
SmallRig
Separate Bowens softboxes, including the 55 cm parabolic RA-D55.
- According to SmallRig, the RA-D55 comes with diffusion panels and a grid; when opened, the softbox measures approximately ⌀55 × 37 cm.
- You’ll need to have or arrange a light source separately. The claim that it assembles quickly comes from the manufacturer and isn’t based on an independent time test.
NEEWER
Offers both complete softbox sets and compact light modifiers with model-specific mounts.
- According to NEEWER, the NK103 set includes two softboxes, lights and stands. The NS3P is designed for the MS lights specified by NEEWER.
- The NK103 set with two stands can take up a lot of space in a small workspace. NEEWER states that the NS3P isn’t compatible with Bowens; for an electrical set, also check the exact specification for the Netherlands.
Related products
Related products will be available soon.
Frequently asked questions
Do I need to buy a softbox light before taking photos of bread?
No. First, try the light from your window at an angle from the side. If the sunlight is too direct, try using a thin curtain. Artificial light is mainly an option if you want to depend less on the time of day and the weather.
Can I fit a Bowens softbox to any LED light?
No. Check the mount on the exact light model. For example, NEEWER states that the NS3P has a NEEWER mount and isn’t compatible with Bowens.
How can I start lighting my bread without flattening the texture of the crust?
Start by positioning the light to one side, then check the shadows on the crust in a test shot. Next, adjust the direction or diffusion. Use an included grid if you want more control over stray light. A fixed position won’t necessarily work for every loaf or table.
What ongoing costs or support should I consider after buying?
Check whether the light, power supply and stand are included, as a separate softbox may need additional parts. ACM ConsuWijzer distinguishes between statutory and seller’s guarantees; if a product is faulty, contact the seller.
Does an electric softbox set need a quality mark in the Netherlands?
Electrical equipment placed on the market in the Netherlands must comply with the applicable European product rules. According to Business.gov.nl, manufacturers must affix the required CE marking and draw up an EU declaration of conformity when the product complies. CE isn’t an independent quality mark. These rules for electrical equipment can’t be treated as a feature of a passive, separate softbox without a separate assessment.