Who are these options for?

Vinyl beginner without an amplifier

You want to play rock records in stereo without lots of separate equipment. Check whether your turntable has a LINE output and whether the speakers have a suitable input. Audio-Technica explains that passive speakers don’t contain their own amplifier.

Listener with limited space

You need room for two speakers, so first check whether their dimensions and placement options will work with your furniture. DALI lists shelf, stand and wall placement for the SONIK 1; check the guidance for the exact model.

Listener building a system

You want to choose your amplifier and passive speakers separately and make sure their connections are compatible. DALI points out that a speaker’s impedance can change with frequency, so its nominal rating doesn’t tell the whole story.

What should you look for?

Active speakers with a line input

A good fit if: you don’t want a separate amplifier and your turntable has a LINE output, or you use a separate phono preamp.

Keep in mind: if your turntable only outputs PHONO, you’ll still need phono pre-amplification for a standard line input.

Active speakers with a switchable phono input

A good fit if: you want to connect a turntable without a built-in phono preamp directly to an active stereo pair.

Keep in mind: match the PHONO and LINE settings on both devices. The connections on the Klipsch The Fives aren’t automatically available on other models.

Passive speakers with a separate amplifier

A good fit if: you already have a suitable amplifier or want to choose your source and amplification separately.

Keep in mind: allow for the amplifier, speaker cables and, if needed, phono pre-amplification. Check the load requirements for the exact model.

What to consider What should you check? Who is this important for?
Turntable connection Check the turntable’s PHONO or LINE output, the input on the exact speaker model, and where the phono pre-amplification takes place. Is making sure your turntable connects properly to your speakers your main concern? Around 31% of consumers say connectivity is their top priority.
Space for two speakers Measure the available width, height and depth for each speaker, and check the model’s placement instructions. Are you short on space and want to check that both speakers will fit? Around 25% of consumers put placement first.
Bass and dynamics Where possible, listen to familiar albums at your usual volume. Also check the conditions attached to the specifications and any subwoofer connections. With rock, are drums and bass guitar what you care about most? Around 25% of consumers make their preferred sound the main priority.
Complete stereo system Check what you’ll need: an amplifier, phono pre-amplification, cables and, if required, stands. Also check whether the packaging contains one speaker or a pair. Want to avoid finding out after you’ve chosen that you need to buy extra components? Around 19% of consumers put the total cost of a complete system first.

Avoiding common buying mistakes

  • Mistaking an RCA line input for a phono input

    A PHONO signal isn’t the same as a LINE signal. Double phono pre-amplification can also cause distortion.

    Check the PHONO or LINE setting on both your turntable and speakers, and use exactly one suitable phono preamp in the signal chain.

  • Comparing passive speakers on their own

    Passive speakers don’t have a built-in amplifier, so you’ll also need a suitable amplifier for a working stereo setup.

    For each setup, work out which components you already have and which you still need, including an amplifier, phono pre-amplification and connection cables.

  • Assuming wattage proves a speaker will sound better with rock

    A speaker’s stated power rating or impedance doesn’t, on its own, predict how it will sound in your room. With passive speakers, the characteristics of both the amplifier and the speaker matter.

    Use specifications to check compatibility, and where possible, listen to your own music before judging the sound.

Brands to consider

Edifier

Active bookshelf speakers for anyone looking to avoid a separate speaker amplifier.

  • According to Edifier’s specifications, the R1280DBs has LINE, optical and coaxial inputs, a subwoofer output and a front-firing port.
  • The LINE input isn’t a phono input. Check whether your turntable or a separate phono preamp converts the PHONO signal.

DALI

Passive models such as the SONIK 1 for anyone looking for a compact speaker and using or choosing a separate amplifier.

  • DALI lists shelf, stand and wall placement for the SONIK 1.
  • You’ll still need a suitable amplifier. Check the placement instructions for the exact model.

ELAC

Passive bookshelf models, including the Debut 3.0 DB53 and Debut Reference DBR62.

  • The official DB53 specifications list a nominal impedance of 6 Ω, a recommended amplifier power of 20–120 W and a front-firing port.
  • These figures apply to the DB53 and don’t automatically apply to the DBR62. Check the specifications for the model you’re considering.

Klipsch

The Fives is an active model for a range of sources; the RP-600M II is a separate, passive model.

  • Klipsch says The Fives has a switchable phono input.
  • Match the PHONO and LINE settings to your turntable. Don’t assume the RP-600M II has the same connections.

HiVi-Swans

The D3.1MKII is a passive bookshelf model for use with a separate amplifier.

  • The manufacturer identifies the D3.1MKII as a passive speaker.
  • Allow for a separate, suitable amplifier when making your choice.

Joybuy product picks

These product picks are pairs of passive bookshelf speakers for anyone who has a separate amplifier or wants to choose one separately.

HiVi-Swans DIY3.1 passive bookshelf speakers, 6.5-inch, pair

HiVi-Swans DIY3.1 passive bookshelf speakers, 6.5-inch, pair

This passive pair is a good fit if you use or want to choose a separate amplifier.

Type: pair of passive bookshelf speakers; size: 6.5 inches.

View at Joybuy
HiVi-Swans D3.1MKII passive bookshelf speakers, 6.5-inch, pair

HiVi-Swans D3.1MKII passive bookshelf speakers, 6.5-inch, pair

This passive pair is a good fit if you use or want to choose a separate amplifier.

Type: pair of passive bookshelf speakers; size: 6.5 inches.

View at Joybuy

Frequently asked questions

Can I connect my turntable directly to active bookshelf speakers?

It depends on the output signal and the speakers’ input. A turntable set to LINE can connect to a suitable line input. With PHONO, you’ll need phono pre-amplification, either in a separate device or in the speakers. For The Fives, Klipsch recommends matching the Phono and Line settings on both devices.

Do passive speakers only need speaker cable?

No, passive speakers also need a suitable amplifier. If your turntable outputs a PHONO-level signal, check whether the amplifier has a phono input or whether phono pre-amplification is provided elsewhere in the signal chain.

How do I check placement and ventilation?

Measure the space available for each speaker and follow the instructions for the exact model. For active speakers, also make sure the ventilation isn’t blocked. Edifier recommends leaving at least 5 cm of clearance for ventilation around the R1280DBs.

Does a CE marking prove that a speaker has been approved by the EU?

No. For products that must carry a CE marking under the applicable EU rules, the manufacturer declares that the product meets those requirements. According to Your Europe, there is no central EU body that issues a CE certificate for every product. The rules that apply depend on the device. For radio equipment, the European Commission describes requirements covering areas including safety, electromagnetic compatibility and use of the radio spectrum.