Listener with limited wall space
This listener wants to enjoy piano sonatas in stereo but can only place the speakers close to or against a wall. Suitable placement options and manageable bass are therefore important considerations.
Start with a stereo pair that you can position as symmetrically as possible around your listening spot, and whose placement guidance suits your room. Then check that the speakers are compatible with your amplifier and music source: a front-firing bass port, wall mounting or bass control won’t, on its own, guarantee natural-sounding piano in your room. Compare what you need for a complete set, too, rather than looking only at the price of a single speaker.
This listener wants to enjoy piano sonatas in stereo but can only place the speakers close to or against a wall. Suitable placement options and manageable bass are therefore important considerations.
This listener wants to connect a passive stereo pair to existing equipment, with a particular focus on placement, amplifier compatibility and whether the box contains a complete pair.
This listener is looking for two compact speakers with built-in amplification and connections that suit their music source.
| Consideration | What should you check? | Who is this important for? |
|---|---|---|
| Bass and distance from the wall | Check the placement guidance, the space available around the specific model and any bass controls. Genelec Support explains that a nearby wall can boost a monitor’s low frequencies. | If I need to put the speakers close to the wall, I want to know how the bass will sound where I listen and what placement the model allows. Around 37% of consumers give the effect of walls and speaker placement top priority. |
| Stereo placement | Check whether the left and right speakers can be positioned at similar heights and distances from your listening spot. DALI recommends a symmetrical arrangement around your preferred listening position. | When I listen to piano sonatas, I want to be able to position two speakers evenly in a practical spot. Around 27% of consumers prioritise stereo setup. |
| Connection to your source | Make a note of your music source’s outputs and, for passive speakers, check the amplifier specifications. KEF lists HDMI ARC and USB-C among the connections on the LSX II LT; the Genelec 8010A has one analogue XLR input per speaker. | If I want to keep using my current music source, I want to make sure it can connect to the amplifier or active speakers. Around 18% of consumers give source compatibility top priority. |
| Complete stereo system | Check how many speakers are included in the box and what else you’ll need, such as an amplifier or cables. Genelec lists one 8010A per box; the KEF LSX II LT uses a wired connection between the two speakers. | If I want to connect two speakers and start listening straight away, I want to know in advance what else I’ll need. Around 18% of consumers prioritise the cost and requirements of the complete set-up. |
A front-firing port doesn’t stop a nearby wall from affecting the bass where you listen.
Treat the port’s position as just one model specification. Check the placement guidance and any bass controls for the set-up you’ll actually use.
Genelec lists one 8010A per box and an XLR input. So one monitor isn’t the same as a pair of speakers for stereo listening.
Before you buy, check what’s included in the box and whether your source has the connection you need.
KEF specifies a wired connection between the two speakers for the LSX II LT.
Plan where both speakers will go and check the connections on the exact LSX II LT model.
A passive speaker needs a suitable external amplifier. ELAC lists a nominal impedance of 6 Ω and a recommended amplifier power of 20–140 W for the DB63.
Compare your amplifier’s specifications with those of your chosen speaker model before ordering.
DALI describes the passive SONIK 1 as suitable for placement on a shelf, stand or wall. The SONIK ON-WALL is a separate model designed for wall mounting.
The Debut 3.0 DB63 is a passive bookshelf model for anyone choosing their own amplifier or who already has a suitable one.
The active LSX II LT is designed for anyone who wants to connect sources to a compact stereo system without a separate amplifier.
The active 8010A is a compact monitor for close-range listening, where placement and bass adjustment may need attention.
The Diamond 12.1 is a traditional passive bookshelf model to consider if the placement guidance suits the space you have available.
These products are passive bookshelf pairs for stereo listening. If you’re placing them close to a wall, check the model’s instructions and remember that you’ll need a separate amplifier.
No image available
This passive bookshelf pair is suitable for a stereo system with a separately chosen amplifier.
The product name specifies one pair and a size of 6.5 inches. A suitable external amplifier is required for use.
No image available
This passive bookshelf pair is suitable for a stereo system with a separately chosen amplifier.
The product name specifies one pair and a size of 6.5 inches. A suitable external amplifier is required for use.
No. A front-firing bass port doesn’t prevent a nearby wall from affecting the bass where you listen. ELAC specifies this type of port for the DB63; also check the guidance for your chosen model and assess the set-up in your listening space.
Start by positioning them as symmetrically as possible around your listening spot, and avoid placing objects between the speakers and the listener. Then follow the instructions for your chosen model; guidance for one product range doesn’t automatically apply to another.
You don’t need a separate power amplifier for the active KEF LSX II LT or Genelec 8010A. Do check that your music source can connect: KEF lists HDMI ARC and USB-C among the connections on the LSX II LT, while Genelec specifies an analogue XLR input for the 8010A.
Follow the manual for your specific model. ELAC recommends occasionally dusting its Debut 3.0 speakers and advises against using abrasive or solvent-based cleaners. Switch off your equipment before connecting speaker cables.
When you buy as a consumer, you’re entitled to a product that meets the terms of your purchase. If a product is faulty, contact the seller to find a solution. According to the Dutch government, the Netherlands doesn’t have a fixed statutory two-year warranty period: what you can expect from a product depends on the product and the circumstances.
For applicable online consumer purchases, you generally have a statutory 14-day cooling-off period from the date of delivery. ACM ConsuWijzer also explains the rules on unpacking and trying products; check the applicable terms and handle the speakers with care.