Who is this choice relevant to?

Listener with limited space behind the speakers

You want to position stereo speakers against a wall or on a shallow piece of furniture, so bass and the required clearance are key considerations. Genelec and KEF Netherlands offer guidance on speaker placement.

Soul music fan with their own amplifier

You want to listen to vocals, instruments and bass in stereo using your existing hi-fi equipment, and can adjust the amplifier pairing and speaker placement. ELAC Netherlands and KEF Netherlands outline what to consider with passive speakers and placement.

Playlist streamer without an amplifier

You want to play music from a phone or network without a separate amplifier, and want to know in advance whether the system uses Bluetooth, network streaming or a cable between the speakers. Edifier and KEF describe these connection and playback options for specific models.

What do consumers look for?

First, measure the space available for both speakers. Then decide which playback setup suits your equipment: an active set, or passive speakers with a separate amplifier.

What to consider What should you check? Who is this important to?
Placement and bass Measure the space behind and beside both speakers, and follow the instructions for the exact model. If my shelf leaves little space behind the speakers, I want to know whether the setup meets the placement instructions. Around 36% of consumers give top priority to positioning speakers near a wall.
Playlist balance Listen from your intended position and, if necessary, first adjust the speaker positions or where you sit. If I want to hear vocals and the rhythm section in balance, I want to assess the bass from my own listening position. Around 29% of consumers prioritise this musical balance.
Playback setup Check whether your source uses Bluetooth, a wired input or network streaming, and whether the speakers are connected to each other by a cable. If I want to start my playlist easily from my phone or network, I want to know what connection my source needs. Around 21% of consumers give top priority to playback and control.
Complete set Check whether you’re buying a pair and whether you’ll need an amplifier, cables or mounting hardware. If I don’t already have all the necessary hi-fi components, I want to know what I’ll need to play music in stereo. Around 14% of consumers prioritise a complete set and the components it requires.

Buying pitfalls

  • Assuming a front-firing bass port guarantees good bass close to a wall

    The position of the port alone doesn’t determine how the bass sounds where you’re listening. KEF Netherlands explains that even a speaker with a rear port interacts acoustically with the wall.

    Assess the bass in the planned position and follow the placement instructions for the exact model.

  • Buying a passive speaker as if it were a complete playback system

    Passive speakers need a separate amplifier. Check what’s included in the sale and which equipment and connections you already have.

    If you don’t already have them, allow space for a suitable amplifier and speaker cables too.

  • Assuming ‘wireless’ means there’s no cable between the speakers

    According to KEF, the LSX II LT has a cable between the speakers, even though the system supports wireless playback features.

    Plan where the speakers will go and how the cable will run, and check which connecting cable is supplied with the exact system.

  • Buying a wall bracket without checking the fixings

    Q Acoustics lists the WB50 as compatible with the 3020c, but the product information says that screws for the wall aren’t included.

    Check that the bracket is compatible with your model, consider the wall surface and find out which fixings you’ll need.

Brands to consider

Edifier

The active R1280DBs is worth considering if you want to listen without a separate amplifier and have limited space behind the speaker.

  • Edifier lists a front-firing bass reflex port and Bluetooth, optical, coaxial and RCA inputs for the R1280DBs.
  • A front-firing port doesn’t guarantee a consistent sound near a wall. The manual recommends at least 5 cm of clearance for ventilation.

ELAC

The passive Debut Reference DBR62 suits an existing amplifier or one you choose separately, provided you can allow the recommended placement space.

  • ELAC Netherlands lists a nominal impedance of 6 ohms and a sensitivity of 86 dB at 2.83 V at 1 m for the DBR62.
  • The ELAC manual recommends leaving around 1–2 feet between the speakers and the walls. This may be impractical on a shallow shelf close to a wall.

KEF

The active LSX II LT is worth considering if network streaming and a range of digital sources are important to you.

  • KEF lists streaming services, Bluetooth, HDMI ARC, USB-C and a subwoofer output for the LSX II LT.
  • According to KEF, there’s a cable between the two speakers. Plan the cable route and make sure you distinguish this model from the LSX II.

Q Acoustics

The passive 3020c is an option if you’re also considering wall mounting.

  • Q Acoustics lists the 3020c as compatible with the WB50 wall bracket.
  • This compatibility doesn’t tell you how the bass will sound in every wall position. Q Acoustics says that screws for the wall aren’t included with the bracket.

Joybuy products for passive speaker setups

These Joybuy products are for passive bookshelf speaker setups. They’re intended for consumers who use or plan to choose a separate amplifier.

HiVi-Swans DIY3.1 passive bookshelf speakers, pair

HiVi-Swans DIY3.1 Passive Bookshelf Speakers, pair

Suitable if you want to use passive stereo speakers with an existing amplifier or one you choose separately.

Passive pair; 6.5-inch drivers. A separate amplifier is required.

View at Joybuy
HiVi-Swans D3.1MKII passive bookshelf speakers, pair

HiVi-Swans D3.1MKII Passive Bookshelf Speakers, pair

Suitable if you’re looking for a passive stereo pair and already have an amplifier or want to choose one separately.

Passive pair; 6.5-inch drivers. A separate amplifier is required.

View at Joybuy

Frequently asked questions

Can a speaker with a rear bass reflex port stand close to a wall?

It depends on the exact model and where you place it; there’s no universal distance that applies to all speakers. In its guidance for monitor placement, Genelec recommends at least 50 mm of clearance for a rear port, but don’t automatically apply this measurement to other models. Follow the manual for the speaker you choose.

What distance does ELAC recommend for the DBR62?

The ELAC manual recommends leaving around 1–2 feet, or approximately 30–61 cm, between the speakers and the walls, particularly in corners. This is a recommendation for this model, not a general minimum distance for all speakers.

How much space should I leave between the Edifier R1280DBs and the wall?

Edifier recommends leaving at least 5 cm of clearance around the R1280DBs for ventilation. Follow the manual for any other model. Before cleaning, unplug the speakers from the mains, as instructed in the manual.

Should I take out extra cover when buying speakers online?

Extra cover isn’t a condition of your statutory guarantee. ACM ConsuWijzer distinguishes between the statutory guarantee and a seller’s guarantee; if a product is faulty, the applicable legal rights apply. For a standard online purchase, you’ll generally also have 14 days from delivery to change your mind.

Which European rules apply to a Bluetooth speaker?

Radio equipment placed on the EU market is subject to the Radio Equipment Directive, which includes requirements for safety, electromagnetic compatibility and radio spectrum. According to Your Europe, the CE marking indicates that the manufacturer declares the product complies with the applicable EU product rules; it isn’t an independent quality test. Check the information for the exact model.