Start with the space you have and your music source, rather than assuming there’s one best speaker for blues. A front port or clear placement instructions can be a practical starting point, but KEF says a rear-ported speaker isn’t automatically unsuitable near a wall. Then compare active, passive and compact networked systems, and check that your source can be connected properly.
Who are these speakers for?
Listener with limited wall space
You need to fit your speakers close to a rear wall or on a shelf, and want to know which placement and port configuration will work for your setup. KEF, Edifier and Sonos provide model-specific information about placement and port position.
Blues listener looking for stereo
You want to position two speakers to the left and right of your listening spot, and are comparing an active pair with passive speakers and an amplifier. ELAC describes the DB53 as a passive speaker, while Sonos explains how two Era 100 speakers can be used together.
Listener with CDs or vinyl
Before buying, you want to work out how to connect your existing player to your chosen speakers and what extra components you might need. Edifier lists several inputs for the R1280DBs, while Sonos describes a separate adapter for connecting a wired source to the Era 100.
What should buyers look for?
Active stereo pair
Choose this when: you want two speakers and can connect your source to an input on an active system, such as the analogue, optical, coaxial or Bluetooth input listed by Edifier for the R1280DBs.
Trade-off: check that your source connects directly, and assess the bass where you plan to place the speakers.
Passive stereo pair with amplifier
Choose this when: you already have a suitable amplifier or want to choose your source and amplifier separately; ELAC lists a front port for the DB53, while KEF describes the Q1 Meta as passive.
Trade-off: allow for the amplifier, cables and any brackets you may need. A front port or bracket doesn’t guarantee the right sound in every location.
Compact network speaker
Choose this when: you play your collection through a supported digital connection and a compact setup is important. Sonos recommends leaving 2.5 cm behind the Era 100 when placing it beside a wall or in a cabinet.
Trade-off: Sonos lists a separately available line-in adapter for a wired CD or record player. For stereo with two separate speakers, you’ll need two.
| Consideration |
What should you check? |
Who is this important to? |
| Placement and bass |
Check the port position, the instructions for the specific model, and the space available behind and beside the cabinet. |
I have limited space by the wall and want to know whether the speaker can be placed there according to the instructions; around 33% of consumers put placement first. |
| Stereo pair |
Check whether the offer includes one speaker or a pair, and whether you have room for two positions around your listening spot. |
I want to position separate speakers on the left and right, and need space to do so; around 27% of consumers give the stereo pair top priority. |
| Connecting your music source |
Note your player’s output and check the full signal path, including any adapter or amplifier you may need. |
I want to play CDs, vinyl or another collection through my own player, and want to know in advance which connection I’ll need; around 20% of consumers start with the source connection. |
| Complete setup |
Work out which speakers, amplifier, cables, brackets or adapters you need, and where everything will go. |
I want to know in advance which components will fit in my compact setup; around 20% of consumers prioritise the overall space required and the components needed. |
Common buying pitfalls
-
Assuming a front port guarantees good placement
Even with a front port, your listening position and room layout still matter. KEF says a rear port doesn’t automatically make a speaker unsuitable near a wall.
Measure the available space, read the instructions for the specific model and, if possible, try the speaker in the spot where you plan to use it.
-
Comparing a single speaker or passive pair with a complete active system
The components you need vary by setup. A passive pair requires a suitable amplifier; for stereo with two separate speakers, you may need a second speaker.
First, make a list of the components you’ll need for your music source and preferred stereo setup. Then check what the specific offer includes.
Depending on the setup you choose, you may also need cables, brackets or a line-in adapter.
-
Assuming every analogue input connects directly to every record player
An analogue input alone doesn’t tell you what output your record player has or which signal path it needs.
Check your player’s output and whether it has a built-in preamp against the speakers’ input. Sonos lists a separate line-in adapter for connecting a wired source to the Era 100.
Depending on your existing equipment, you may need a phono preamp or adapter.
Brands to compare
Edifier
Active bookshelf speakers, including the R1280DBs, which offers a compact stereo setup with several inputs.
- For the R1280DBs, Edifier lists a front port, analogue and digital inputs, and a subwoofer output.
- Check that your source’s output matches one of the inputs, and assess the bass where you plan to place the speakers. These features apply to this model.
ELAC
Compact passive hi-fi, including the Debut 3.0 B5.3, which ELAC also calls the DB53.
- ELAC specifies a front port for the DB53.
- You’ll need a suitable separate amplifier. The manufacturer’s specifications aren’t a listening test in your room.
KEF
Passive bookshelf hi-fi, including the Q1 Meta; KEF also offers a separate wall bracket for this model.
- KEF specifies the Q1 Meta as passive and lists the B2 bracket for mounting.
- The bracket is sold separately. KEF emphasises that you should assess how a rear port and the wall affect the sound in your particular setup.
Sonos
Compact network speakers, including the Era 100, for streaming over Wi-Fi or Bluetooth.
- Sonos provides placement advice for the Era 100 and explains how to use two speakers as a pair.
- Sonos lists a separate line-in adapter for a wired source and recommends leaving space behind the speaker when placing it beside a wall or in a cabinet.
Q Acoustics
Passive 3000c bookshelf speakers, including the 3020c, which can be mounted using a suitable bracket.
- Q Acoustics lists the 3020c as compatible with the WB50 bracket.
- The bracket is sold separately; mounting the speaker alone doesn’t tell you how it will sound close to your wall.
Passive bookshelf speakers on Joybuy
These Joybuy products are pairs of passive bookshelf speakers for a stereo setup; you’ll need a suitable amplifier.
No image available
HiVi-Swans DIY3.1 passive bookshelf speakers, pair, 6.5 inches
This passive pair is designed for anyone looking for two bookshelf speakers for a stereo setup; connect them to a suitable amplifier.
The product title lists 6.5 inches. Check the manual and the available space before placing the pair close to a wall.
Joybuy
No image available
HiVi-Swans D3.1MKII passive bookshelf speakers, pair, 6.5 inches
This pair is a good fit if you’re looking for two passive bookshelf speakers for stereo and can use a suitable separate amplifier.
The product title lists 6.5 inches. Check the manual and the space needed to place them close to the wall.
Joybuy
Frequently asked questions
Does a bookshelf speaker with a rear port always need to be placed well away from the wall?
No. A rear port doesn’t automatically make a speaker unsuitable near a wall. KEF explains that the effect of the wall can vary from one setup to another, so follow the instructions for your chosen model and assess the placement from your listening position.
Can I connect a CD player or record player to a Sonos Era 100?
Sonos lists the separately available Line-In Adapter or Combo Adapter for this. Also check that your player provides a suitable line-level signal; some record players need additional components.
What do I need for a passive stereo pair?
A passive stereo pair needs a suitable amplifier between the source and the speakers. Also check whether your offer includes two speakers and whether you’ll need any cables or brackets for your chosen setup.
How should I position two speakers around my listening spot?
In its OBERON series manual, DALI recommends a symmetrical setup around the listening position and suggests experimenting with placement. For other models, follow the manufacturer’s own instructions.
How much space does a Sonos Era 100 need behind it when placed by a wall?
Sonos recommends leaving at least 2.5 cm behind and on both sides of the Era 100 when placing it beside a wall or in a cabinet. Compare this guidance with the space you actually have available.