Who is this choice for?

Listeners who prioritise guitar and vocals

Want to judge familiar acoustic recordings for themselves, rather than relying on a single frequency figure.

Listeners with limited space

Need to fit two speakers on a shelf, a piece of furniture or a suitable stand. Q Acoustics describes these placement options for the 3020i, as well as wall mounting with suitable accessories.

Listeners who want a straightforward set-up

Want to check that their source and any amplifier are compatible with the speakers, or are looking for an active set without a separate amplifier. Edifier lists Bluetooth, RCA/AUX, optical and coaxial connections for the R1280DB.

What should you look for when choosing?

First decide how you want to assess the sound, where both speakers can go and how you’ll connect them. Then check what you’ll need for a complete stereo set-up.

What to consider What should you look for? Who should prioritise this?
Judging guitar and vocals by ear Where possible, compare stereo pairs using the same familiar recordings at a similar volume. I want to hear for myself how familiar guitar and vocal recordings sound, rather than relying on a single frequency figure; around 36% of consumers put sound quality first when buying.
Finding space in a small living room Measure the space available for both cabinets and check the model-specific guidance on positioning and any brackets. DALI notes that the position of its OBERON series affects sound quality. If space is limited, both cabinets need to fit and the listening position needs to be practical; around 29% of consumers prioritise placement.
Connecting to your source and equipment Make a note of your source’s outputs. For passive speakers, check the exact model’s impedance and amplifier recommendations. KEF lists a nominal impedance of 4 Ω and recommends an amplifier rated at 10–150 W for the Q1 Meta. I want to connect my speakers to my existing source or find out whether my amplifier is suitable; around 21% of consumers put connectivity first.
What you need for a complete stereo set-up Check whether the offer includes one speaker or a pair, and what amplifier, cables or placement accessories your set-up requires. I want to know in advance what I’ll need for a complete stereo set-up; around 14% of consumers prioritise the equipment they need.

Things to consider when buying

  • Assuming a single speaker is a complete stereo pair

    Stereo requires two speakers, but offers can vary in what they include and how many items are sold.

    Before comparing models, check whether the specific offer is for one speaker or a pair.

  • Assuming similar Edifier model names mean the same version

    Edifier lists a subwoofer output for the R1280DBs, but not for the R1280DB. Don’t assume the R1280DB has this connection without checking.

    Check the full model name and connections of the version you’re considering.

  • Treating a frequency range as proof of the best guitar sound

    Specifications may be based on different testing conditions and can’t tell you on their own how a speaker will sound in your listening space.

    Read the testing details and, where possible, listen to familiar recordings in the place where you plan to use the speakers.

Brands to consider

Q Acoustics

Q Acoustics describes the passive 3020i as a bookshelf speaker sold as a pair.

  • Q Acoustics describes placement on a shelf or stand, or on a suitable wall bracket.
  • A passive set-up requires a suitable amplifier.

Edifier

The active R1280DB is a stereo set for anyone looking to match its connections to their chosen music source.

  • Edifier lists Bluetooth, RCA/AUX, optical and coaxial connections for the R1280DB.
  • Don’t assume the R1280DB has the subwoofer output Edifier lists for the separate R1280DBs model; check first.

KEF

The passive Q1 Meta is a bookshelf model designed for use with a separate amplifier.

  • KEF lists a nominal impedance of 4 Ω and recommends an amplifier rated at 10–150 W for the Q1 Meta.
  • Check that your amplifier is suitable for the specifications of the exact model.

Wharfedale

The DIAMOND 12.2i is a bookshelf model in the refreshed DIAMOND 12i series.

  • Wharfedale says the refreshed series has a revised bass port tuning.
  • The manufacturer’s description can’t tell you how the model will sound in a small living room; check its dimensions and placement requirements too.

ELAC

The passive Debut 3.0 DB63 is a bookshelf model to compare against your available space and amplifier.

  • ELAC lists a front-firing port, dimensions of 195 × 339 × 298 mm, a nominal impedance of 6 Ω and a recommended amplifier power of 20–140 W.
  • Consider the cabinet dimensions and check that your amplifier is compatible with the model’s specifications.

Joybuy products

This selection features passive bookshelf speaker pairs for a stereo set-up. You’ll also need a suitable amplifier to complete it.

HiVi-Swans DIY3.1 passive bookshelf speakers, pair of 6.5-inch speakers

HiVi-Swans DIY3.1, passive bookshelf speakers, pair of 6.5-inch speakers

This passive bookshelf pair is worth considering for a stereo set-up with acoustic guitar recordings; you’ll also need a suitable amplifier.

Passive; 6.5 inches; one pair.

View at Joybuy
HiVi-Swans D3.1MKII passive bookshelf speakers, pair of 6.5-inch speakers

HiVi-Swans D3.1MKII, passive bookshelf speakers, pair of 6.5-inch speakers

This passive bookshelf pair is worth considering for a stereo set-up with acoustic guitar recordings; you’ll also need a suitable amplifier.

Passive; 6.5 inches; one pair.

View at Joybuy

Frequently asked questions

Do passive bookshelf speakers need a separate amplifier?

Yes. The passive models covered here need to be used with a suitable amplifier. Check the recommendations and impedance for the exact model against your amplifier’s specifications. KEF lists a nominal impedance of 4 Ω and recommends an amplifier rated at 10–150 W for the Q1 Meta.

Can I simply put speakers at the back of a bookcase?

Don’t assume so without checking: measure the space and follow the instructions for your chosen model. DALI recommends experimenting with the position of its OBERON series, as placement affects sound quality. This isn’t a fixed distance rule for all speakers.

What connections does the Edifier R1280DB have?

Edifier lists Bluetooth, RCA/AUX, optical and coaxial connections for the R1280DB. Don’t assume it has the subwoofer output Edifier lists for the separate R1280DBs model; check the full model name and version.

What return and warranty rights apply when buying online in the Netherlands?

According to the Government of the Netherlands, consumers buying online from a business generally have a 14-day cooling-off period; purchases from a private seller aren’t covered by the distance-selling rules described there. If a product is faulty, you may have statutory rights against the seller. Check who the seller is, and don’t confuse your statutory rights with a voluntary manufacturer’s warranty.

Does a Bluetooth speaker have to comply with European product rules to be sold in the Netherlands?

Bluetooth speakers are radio equipment and fall under the European regulatory framework for radio equipment. The Dutch government states that electronic devices offered for sale in the EU must carry a CE marking. Check the marking and documentation for the specific product on offer; a CE logo alone isn’t an independent assessment of sound or quality.