Who are these speakers for?

Listeners who put bass first

You play electronic music from a seated listening position and want to assess the low frequencies in the room where the speakers will go. Frequency specifications are useful for comparison, but acoustics and placement also affect what you hear. A subwoofer can extend the system, but it isn’t automatically necessary.

Listeners with limited placement options

Your loft has hard surfaces or little room for a stereo pair. Start with your listening position and see whether you can place the speakers symmetrically there. Reflections from surfaces and furniture can also affect what you hear. Genelec explains how acoustics and placement influence sound.

Listeners with a fixed workstation

You mainly listen at a desk or DJ setup and are comparing active nearfield monitors with speakers designed for listening from further away. ADAM Audio describes the T7V as a vertical nearfield monitor; check that this setup suits your listening distance and audio source.

What should you look for when choosing?

Passive bookshelf speakers

A good fit if: you already have a suitable amplifier or want to choose your amplifier and speakers separately.

Bear in mind: the amplifier and required connections are part of choosing your system; check the requirements of the exact model.

Active hi-fi bookshelf speakers

A good fit if: you want to play music without a separate amplifier and the available inputs suit your audio source.

Bear in mind: compare the inputs with your equipment, and don’t assess the stated bass response without considering how it was measured.

Active nearfield monitors

A good fit if: you mainly listen from a fixed workstation or DJ setup.

Bear in mind: a nearfield design doesn’t automatically tell you how the same pair will sound from a listening position further away in your loft.

Priority What to look for when buying Who it’s for
Bass response Only compare frequency ranges when they use the same measurement basis; if possible, listen in your intended space before considering a subwoofer. I mainly want to assess the low frequencies in electronic music from my listening position. Around 36% of consumers put bass response first.
Placement and acoustics Check that you have room for two speakers and a listening position; try a symmetrical layout and note any placement guidance for the specific model. In my loft, furniture or hard surfaces determine where I can put a stereo pair. Around 29% of consumers make placement their top priority.
Connections and system Make a note of your audio source and existing equipment; check the inputs, amplifier requirements and whether the offer is for one speaker or a pair. I want my speakers to connect to my current or planned equipment without overlooking a component I need. Around 21% of consumers start with connections and system setup.
Fixed workstation or DJ setup Check your listening distance and how the audio source and volume control connect to the complete stereo pair. If I usually listen at one desk or DJ setup, I want to assess the system for that spot. Around 14% of consumers make their fixed listening position their top priority.

Common buying mistakes

  • Treating lower frequency limits as directly comparable bass measurements

    A frequency figure depends on the measurement tolerance and, by itself, doesn’t tell you how the bass will sound from your listening position. KEF and ELAC publish figures with a measurement tolerance; the stated lower limit for the Edifier has no comparable tolerance.

    Only compare figures when they use the same measurement basis, and assess the pair where you intend to listen.

  • Choosing a system based on the speakers alone

    Passive speakers need a suitable amplifier. Depending on the setup you choose, you may also need an audio source, cables or mounting materials.

    Make a list of your existing equipment and the connections you need before you buy. Also check whether the specific offer includes a pair or just one speaker.

  • Choosing a nearfield monitor for listening anywhere

    ADAM Audio describes the T7V as a nearfield monitor. That design alone doesn’t tell you how well the same pair will work at a greater distance across your loft; your listening position and room acoustics matter too.

    First decide where you usually listen, then assess the monitor setup there before drawing conclusions about other spots in your loft.

Brands to consider

KEF

The passive Q3 Meta is an option for a stereo system you put together yourself. KEF lists a 165 mm Uni-Q driver array.

  • For the Q3 Meta, KEF specifies 49 Hz–20 kHz at ±3 dB, 4 Ω nominal impedance and a recommended amplifier power of 15–150 W.
  • These are manufacturer specifications, not a prediction of the bass at your listening position. Check that your amplifier is compatible with the exact model.

ELAC

The passive Debut 3.0 DB63 is another hi-fi option, with a 6.5-inch woofer and front-firing bass reflex port, according to ELAC.

  • ELAC lists the DB63 as having 6 Ω nominal impedance, recommended amplifier power of 20–140 W and a lower limit of 42 Hz at −6 dB.
  • Don’t compare 42 Hz at −6 dB directly with a frequency figure at ±3 dB. The DB63 also needs a suitable amplifier.

Edifier

The active R1855DB is an option if you want to connect multiple sources without a separate amplifier.

  • For this model, Edifier lists Bluetooth, line, coaxial and optical inputs, as well as a subwoofer output.
  • Edifier states a lower limit of 60 Hz without specifying a comparable measurement tolerance. Don’t use this figure to compare the bass directly with figures for other models.

ADAM Audio

ADAM Audio describes the active T7V as a vertical nearfield studio monitor, making it most relevant to a fixed workstation or DJ listening position.

  • ADAM Audio specifies 39 Hz–25 kHz at −6 dB and a rear-firing bass reflex port.
  • These manufacturer specifications don’t prove that a pair will suit every listening position across your loft. Check the audio source, controls and placement in relation to the rear wall.

Joybuy products for a passive stereo system

This Joybuy product selection focuses on passive bookshelf speakers for a stereo system with a separate, suitable amplifier.

HiVi-Swans DIY3.1 passive bookshelf speakers, pair of 6.5-inch speakers

HiVi-Swans DIY3.1 passive bookshelf speakers, pair

This passive pair is designed for a stereo system with a separate, suitable amplifier.

The product title specifies a pair of 6.5-inch passive speakers.

Joybuy
HiVi-Swans D3.1MKII passive bookshelf speakers, pair of 6.5-inch speakers

HiVi-Swans D3.1MKII passive bookshelf speakers, pair

This passive pair is designed for a stereo system with a separate, suitable amplifier.

The product title specifies a pair of 6.5-inch passive speakers.

Joybuy

Frequently asked questions

Do passive bookshelf speakers need an amplifier?

Yes. Include a suitable amplifier when choosing your system. KEF lists the Q3 Meta as 4 Ω nominal, with recommended amplifier power of 15–150 W; ELAC lists the DB63 as 6 Ω, with recommended amplifier power of 20–140 W. Always check the requirements for the exact model.

Where should you start when placing speakers in a loft with hard surfaces?

Start with your regular listening position and try to arrange the left and right speakers in a similar way. Genelec notes that hard surfaces reflect sound, and that speaker and listener positions affect what you hear; this doesn’t automatically tell you what distances will work in your particular loft.

Should you buy a subwoofer straight away for electronic music?

Not necessarily. First listen to how the stereo pair sounds in your intended position, then decide whether you want more bass. Edifier lists a Sub Out on the R1855DB; check that the connection and other equipment are compatible with the combination you choose.

What can you do if the bass is disturbing your neighbours?

The Dutch government advises you to try agreeing arrangements with your neighbours first, such as setting times when you can play music. Other people you could contact include your landlord, homeowners’ association or local council; check which arrangements apply to your home.

What are your rights when buying speakers online in the Netherlands?

When you buy online from a business, the Dutch government says you will usually have a 14-day cooling-off period; check whether your purchase falls under an exception. If an item is faulty, contact the seller to resolve the issue. The Dutch government states that there is no fixed statutory warranty period covering all products in the Netherlands.