Who is this choice for?

Desk listener who enjoys chamber music

You want to listen to quartet recordings in stereo at home from a fixed listening position, while taking the available space into account. Genelec describes a symmetrical layout for the speakers and listening position as a starting point.

Computer listener without an amplifier

You want to connect your computer without a separate amplifier, so you’re comparing the inputs on active speakers.

Listener with an amplifier

You already have an amplifier or want to choose one separately, so you’re checking what amplification a passive pair needs.

What should you look for?

First, check whether you can place two speakers in suitable positions. Then compare their inputs with your audio source and decide whether you want an active pair or passive speakers with a separate amplifier.

What to consider What should you check? Who is this important for?
Stereo placement Measure the two positions and check whether you can angle both speakers towards your seat. I want to listen to quartet recordings in stereo from a fixed position at my desk. Around 31% of consumers put suitable stereo placement first.
Space on your desk or shelf Compare the width, height and depth of both cabinets with the space available; remember to leave room for cables, too. My desk is small, and I want to know in advance whether both cabinets will fit. Around 25% of consumers give available space top priority.
Connecting to your audio source Note the outputs on your computer and compare them with the inputs on the exact model. Check whether USB audio is listed. I want to connect my computer without an unexpected extra step. Around 25% of consumers prioritise a suitable connection for their audio source.
Amplifier and system choice For passive speakers, check the amplifier requirements; for active speakers, compare the inputs on the pair. I already have an amplifier or want to choose my speakers and amplifier separately. Around 19% of consumers start by putting together their system.

Things to watch out for

  • Treating a passive pair as a complete computer audio system

    Passive speakers need a suitable amplifier, so they’re not a complete computer audio system on their own.

    Before you buy, check whether you already have suitable amplification and how your audio source will connect to it.

  • Assuming every active speaker has USB audio

    Inputs vary by model. ELAC lists USB audio for the Debut ConneX DCB41; Edifier lists line-in, optical, coaxial and Bluetooth among the inputs on the R1280DBs.

    Compare your computer’s output with the connections on the exact model. Make sure you distinguish USB audio from USB ports intended only for updates.

  • Checking the dimensions of only one cabinet

    Both speakers in a stereo pair need a suitable position. The dimensions of one cabinet won’t tell you whether the complete setup will fit your desk.

    Measure both positions and assess the setup from where you normally listen.

Brands to compare

ELAC

The active Debut ConneX DCB41 is an option if you want to listen from a computer or another audio source without a separate amplifier.

  • ELAC lists USB audio, optical, analogue and Bluetooth inputs for this model.
  • The inputs alone don’t tell you how a particular quartet recording will sound.

Edifier

The active R1280DBs is worth comparing if your audio source has one of the listed inputs.

  • Edifier lists line-in, optical, coaxial and Bluetooth inputs, as well as a subwoofer output.
  • The listed dimensions are 146 × 234 × 196 mm per cabinet; USB audio isn’t among the listed inputs.

Genelec

The active 8010A is worth looking into if desk space is limited.

  • Genelec specifies dimensions of 195 × 121 × 115 mm per monitor and one analogue XLR input.
  • Check how you’ll connect your audio source to XLR and whether you’re buying two monitors.

Q Acoustics

The passive 3020c is worth considering if you already have a suitable amplifier or want to choose one separately.

  • The 3020c is a passive standmount speaker.
  • You’ll need a suitable amplifier; check they’re compatible before putting your system together.

KEF

The passive Q1 Meta is an option if you’re using a separate amplifier.

  • KEF specifies a nominal impedance of 4 Ω and a minimum of 3,2 Ω for the Q1 Meta.
  • Check that your amplifier is suitable for this model’s requirements.

Joybuy products

This selection of Joybuy products features passive bookshelf speakers for anyone who wants to use a stereo pair at their desk and can arrange separate amplification.

HiVi-Swans DIY3.1 passive bookshelf speakers, pair of 6.5-inch speakers

HiVi-Swans DIY3.1 passive bookshelf speakers, 6.5", pair

This passive pair is suitable for a fixed listening position if you’re using a separate amplifier.

Passive bookshelf speakers, 6.5", pair. Must be connected to a separate amplifier.

View at Joybuy
HiVi-Swans D3.1MKII passive bookshelf speakers, pair of 6.5-inch speakers

HiVi-Swans D3.1MKII passive bookshelf speakers, 6.5", pair

This passive pair is a good fit for a music system with separate amplification.

Passive bookshelf speakers, 6.5", pair. Requires a suitable separate amplifier.

View at Joybuy

Frequently asked questions

How should you position two speakers if you mainly listen at your desk?

Start with a symmetrical layout, placing one speaker either side of your listening position and pointing both towards your seat. Genelec recommends symmetry as a starting point; adjust the placement to suit your room and chosen model.

Can you connect active speakers directly to any computer?

No, the connection you need varies by model. ELAC’s manual lists USB audio for the Debut ConneX DCB41, while Edifier lists other inputs for the R1280DBs and Genelec specifies one analogue XLR input per monitor for the 8010A. Compare your computer’s output with the input on the exact model.

What’s the difference between active and passive bookshelf speakers?

Active speakers are an option if you don’t want a separate amplifier; passive speakers need suitable amplification separately. For a passive model, check the amplifier requirements. For an active pair, make sure the inputs match your audio source.

How do you clean an Edifier R1280DBs safely?

Edifier instructs you to switch off the device and unplug it before cleaning it with a dry cloth. Follow the manufacturer’s instructions for the exact model.