Who is this relevant to?

Rock fan with a spacious living room

You want to assess the stereo pair from the place where you actually listen, with enough room for both cabinets. In its testing method for wireless speakers, the Consumers’ Association notes that sound can change between normal and high volume; this is not a test result for the passive models on this page.

Vinyl listener with an existing system

You want to connect speakers to your turntable and possibly your existing amplifier without confusing a phono signal with a line-level signal. Audio-Technica explains that passive speakers need an amplifier, and that a turntable with a phono signal requires suitable phono pre-amplification.

Listener without a separate amplifier

You’re looking for a stereo pair with built-in amplification and checking that the connections suit your turntable or other music source.

What should you look for when choosing?

Passive stereo pair

Choose this if: you already have a suitable stereo amplifier or want to choose the amplifier and speakers separately.

Bear in mind: you’ll need a separate amplifier and speaker cables; vinyl may also require a phono preamp.

Active stereo pair

Choose this if: you don’t want a separate amplifier and the inputs on the specific pair suit your source.

Bear in mind: the connections, power supply and link between the speakers; a turntable may still need a phono preamp.

First, work out how your source and amplification will connect. Then consider whether the pair will suit your living room and can be positioned well for your listening spot.

What to consider What to look for when buying Who should pay particular attention?
Sound in the living room Compare familiar rock recordings at normal and higher listening volumes, taking your listening distance and available space into account. I want to know how the pair sounds where I listen, including when I turn up the rock. Around 33% of consumers put room sound first.
Connecting your source and amplifier Check PHONO or LINE, the available inputs and, for passive speakers, the requirements of the model and amplifier you’ve chosen. If I want to keep using my turntable and existing amplifier, I’ll check the signal and inputs first. Around 27% of consumers prioritise source compatibility.
Space for two speakers Measure where both cabinets can go and assess the setup from your usual listening spot; follow the instructions for the specific model. I need to fit two speakers without making my living room impractical. For around 20% of consumers, space for positioning is the main consideration.
Ease of setup Check whether the listing is for a pair, what connections and power are needed, and whether you’ll need to add an amplifier or phono preamp. If I want fewer separate devices, I’ll look for built-in amplification and suitable inputs. Around 20% of consumers prioritise ease of setup.

Common buying mistakes

  • Focusing only on wattage or frequency range

    A stated specification doesn’t tell you how the speakers will sound where you listen. The sound can also change when you turn up the volume.

    Compare familiar recordings at the volume you actually listen at, and check that you can position the speakers properly.

  • Trying to connect a passive pair directly to a turntable

    Passive speakers don’t have a built-in amplifier. A phono signal is also different from a line-level signal.

    Before you buy, map out the signal path: from the turntable through any phono preamp and amplifier to the speakers. Audio-Technica explains the connection requirements for turntables.

  • Assuming a two-year manufacturer’s warranty is the full legal guarantee

    According to ACM ConsuWijzer, there is no set legal guarantee period of exactly two years in the Netherlands; what you can reasonably expect from a product is also taken into account.

    Keep your proof of purchase and contact the seller if you think a product may be faulty.

Brands to consider

KEF

The Q3 Meta is a passive bookshelf speaker designed for a stereo system with a separate amplifier.

  • KEF lists a 6.5-inch Uni-Q driver, a 2-way bass reflex design and amplifier requirements of 15–150 W for this model.
  • Check that your amplifier meets the requirements and assess the sound in your own listening space.

ELAC

The Debut 3.0 DB63 is a passive 2-way speaker for use with a stereo amplifier.

  • ELAC specifies a front-firing port, 6 Ω nominal impedance, 87 dB sensitivity at 2.83 V/1 m and a recommended amplifier power of 20–140 W.
  • These are stated figures, not measured results in your living room; also check how the speakers will work with your amplifier.

Wharfedale

Wharfedale positions the Diamond 12.2 as a passive standmount model for larger rooms and two-channel hi-fi.

  • The manufacturer cites a 150 mm bass-midrange driver and a larger cabinet volume than a smaller model in the same range.
  • Being positioned for larger rooms doesn’t guarantee a particular level of bass in a specific space or at a given listening distance.

Edifier

The S3000MKII is an active stereo pair for anyone who doesn’t want to use a separate amplifier.

  • Edifier lists built-in amplification and, among other connections, a line input, optical input and USB.
  • Check which connections the version on offer has. A turntable with a phono-level output needs suitable phono pre-amplification.

HiVi-Swans

According to the manufacturer, the D3.1MKII is a passive 2-way hi-fi speaker.

  • The product listing describes a pair with 6.5-inch speakers.
  • As a passive pair, this model requires a separate amplifier.

Joybuy products

These product picks are passive bookshelf speaker pairs for a stereo system with a separate amplifier.

HiVi-Swans DIY3.1 passive bookshelf speakers, 6.5-inch, pair

HiVi-Swans DIY3.1 passive bookshelf speakers, 6.5-inch, pair

Suitable for a stereo system using a passive pair with a separate amplifier.

Configuration: pair; 6.5-inch speakers.

View at Joybuy
HiVi-Swans D3.1MKII passive bookshelf speakers, 6.5-inch, pair

HiVi-Swans D3.1MKII passive bookshelf speakers, 6.5-inch, pair

Suitable for a stereo system using a passive pair with a separate amplifier.

Configuration: pair; 6.5-inch speakers.

View at Joybuy

Frequently asked questions

Can I connect a turntable directly to active speakers?

Yes, if the turntable outputs a suitable LINE signal and the active speakers have a compatible line input. If the turntable only outputs a phono signal, you’ll need a phono preamp first. Don’t connect a built-in phono preamp that’s switched on to a phono input as well.

How should I position a stereo pair in my living room?

Start by choosing two positions you can assess from your listening spot, and check the instructions for your chosen model. KEF recommends leaving at least 1 metre between its bookshelf speakers and placing them 30–100 cm from the wall; these aren’t general measurements for every model.

What are my rights when buying online in the Netherlands?

According to ACM ConsuWijzer, for a standard online product purchase you’ll generally have up to 14 days after delivery to change your mind, subject to legal exceptions. You’re also covered by the legal guarantee if a product, when used normally, doesn’t meet what you could reasonably expect; in the Netherlands, this guarantee doesn’t have a set period of exactly two years.

What can I do with old electrical speakers?

The Dutch government explains that the old-for-new scheme for individuals also applies when buying a new, similar appliance online. The scheme doesn’t apply to appliances from businesses.