Jazz listener at the table
Wants to hear voices and instruments in a clear stereo image and can position the two speakers around the dining area.
An active stereo pair is a good choice if you want to listen without a separate amplifier; passive speakers are better if you already have a suitable amplifier or want to choose one separately. Measure the space for both speakers and check that the connections suit your album source: reflections, the distance from the wall and how you connect a turntable can all influence your choice.
Wants to hear voices and instruments in a clear stereo image and can position the two speakers around the dining area.
Also listens while standing or moving around, and wants to keep both speakers away from worktops and splash zones, perhaps on a shelf or mounted on the wall.
Already has a CD player, turntable or amplifier and wants to check whether new speakers can be connected to it.
Choose this if: you want to listen without a separate amplifier and the exact model has the right input for your source.
Bear in mind: you’ll need a mains socket, a connection between the speakers and the right available inputs; Bluetooth is not the same as Wi-Fi streaming.
Choose this if: you already have a suitable amplifier or want to choose one separately.
Bear in mind: you’ll also need amplification and speaker cables; for vinyl, you may also need a suitable phono preamp.
First, consider where the speakers will fit and which source you want to connect. Then compare what you need for a complete, working stereo pair.
| Consideration | What to look for | Who is this most important to? |
|---|---|---|
| Stereo image and musical detail | Try to position both speakers around your listening spot and listen to recordings you know well. | When I listen to jazz at the table, I want to follow the instruments and voices in a clear stereo image; around 31% of consumers prioritise stereo imaging. |
| Positioning in the kitchen-diner | Measure the available width and depth, and consider the distance from the wall, as well as moisture and heat. | When I’m cooking, I want to fit in two speakers without blocking the worktop or splash zone; around 25% of consumers prioritise finding a practical spot. |
| Connecting your album source | Compare the outputs on your source with the inputs on the exact model. For vinyl, check whether the signal is PHONO or LINE. | I want to use my existing CD player, phone or turntable without a connection mismatch; around 25% of consumers prioritise compatibility with their existing source. |
| What you need for a complete system | Check whether you already have amplification, cables and any phono preamp you may need, and what’s included with the pair. | For a working stereo pair, I want to know which other components I’ll need, especially with passive speakers; around 19% of consumers prioritise having a complete system. |
A CD player, digital source and turntable won’t necessarily use the same input. With a turntable, it matters whether the signal is PHONO or LINE.
First decide which source you’ll use, then check its output and the inputs on the exact speaker model.
Passive speakers need a suitable amplifier and must be connected to it. You may also need a phono preamp for vinyl.
Check what you already have and whether you still need an amplifier, cables or other connection equipment.
The distance from a wall and hard surfaces can affect the perceived bass and stereo image. Moisture and cooking heat are also important considerations for active equipment.
Measure both listening spots and follow the instructions for your chosen model. The Edifier R1280DBs manual advises keeping the unit away from moisture and heat sources.
The R1280DB is an active stereo pair for anyone who wants to connect sources without a separate amplifier.
The passive KUPID is a compact speaker for a smaller set-up.
The passive Debut Reference DBR62 is a larger bookshelf speaker for a set-up with enough space and a suitable amplifier.
The passive Q3 Meta is a larger bookshelf speaker for anyone who wants to use an amplifier.
The active M20 has built-in amplification, Bluetooth and wired connections for several sources.
These Joybuy picks are passive bookshelf speaker pairs for a stereo set-up. You’ll need a suitable amplifier to use them.
No image available
A pair of passive bookshelf speakers for anyone who already has a suitable amplifier or wants to choose one separately.
Passive stereo pair; 6.5 inch.>
No image available
A pair of passive bookshelf speakers for anyone with a suitable amplifier who wants to play music in stereo.
Passive stereo pair; 6.5 inch. A separate amplifier is required.
Only if the signal and input are compatible. Audio-Technica explains that a turntable with its built-in RIAA preamp switched on can be connected via LINE to a suitable line input. A PHONO signal first needs suitable phono pre-amplification or a PHONO input. Don’t connect an already amplified LINE signal to a PHONO input.
Keep active speakers away from water, splashes and heat sources, and follow the instructions for the exact model. The Edifier R1280DBs manual warns against moisture and cooking appliances; don’t assume model-specific instructions apply to other speakers without checking.
According to ACM ConsuWijzer, statutory guarantee in the Netherlands applies for as long as the product should last, based on what you could reasonably expect. The seller is responsible for providing an appropriate remedy free of charge if the product is faulty; this doesn’t automatically mean a fixed two-year guarantee period.
Check the specific model’s EU version, marking, documentation and compatible power supply. The Netherlands government states that electronic devices placed on the EU market must carry a CE marking; a general product page doesn’t necessarily confirm these details for every individual unit.
The Netherlands government explains that you can return them to a retailer when buying a new, similar appliance, including when shopping online. You can also use a suitable collection point or your local council recycling centre.